SVS SoundPath Manuals

PB-2000 SB-2000 POWERED SUBWOOFERS Subwoofer Isolation System OWNER’S MANUAL Thank you, and congratulations on purchasing your new SVS SoundPath Subwoofer Isolation System! The SVS SoundPath Subwoofer Isolation System decouples and isolates the subwoofer from the flooring, resulting in tighter and cleaner sounding bass, less buzz/rattle in the room, and fewer complaints from adjacent neighbors in apartments and townhouses. It’s the next best thing to sound-proofing! The SoundPath Subwoofer Isolation System works with any brand of subwoofer which accepts screw-in feet. Developed with extensive accelerometer and acoustic measurements, this system features optimized durometer elastomer feet which significantly reduce floor vibration. Our Sound Experts in Customer Service can assist you with installing the SoundPath Subwoofer Isolation System, so please don’t hesitate to contact Customer Service if you need guidance. If you have any questions about your SVS product, please contact us directly. www.svsound.com • [email protected] • (877) 626-5623 owner’s manual v. 2.0_01102017 1 TABLE OF CONTENTS PACKAGE CONTENTS 3 INSTALLATION 4 CABINET / BOX STYLE SUBWOOFERS 4 SVS CYLINDER SUBWOOFERS – BASE PLATE RETAINED 5 SPECIFICATIONS 6 SHARE YOUR THOUGHTS 6 2

TRI-BAND WIRELESS AUDIO ADAPTER Owner’s Manual (Additional Tri-Band Wireless Receiver) (Transmitter) (Receivers) Thank you for choosing SVS! The following instructions will help you setup additional Tri-Band wireless Receivers with your SVS SoundPath Tri-Band Wireless Audio Adapter. Before proceeding, please complete the setup and pairing instructions for the primary Transmitter/Receiver kit. Installation requires only a few simple steps. If you have questions about subwoofer or speaker placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter, please contact the SVS Sound Experts tech support 7-days-a-week. [email protected] | 877.626.5623 | www.svsound.com Adding Additional Wireless Receivers A single SVS SoundPath Tri-Band Wireless Audio Adapter Transmitter can wirelessly connect and transmit a signal to up to six (6) Receivers. Before Pairing Confirm the primary SoundPath Tri-Band Wireless Audio Transmitter and Receiver are paired. Successful pairing will be indicated by a steady blue light on both the transmitter and receiver. Steps for Pairing Additional Receivers with Transmitter 1. Connect additional Receiver to subwoofer or speakers via RCA cable and connect power cord via USB or AC power outlet. A slow flashing light indicates the unit is not paired. 2. Press and hold the PAIR button located on the back of the Receiver until the blue LED light located on the top of the unit flashes quickly. 3. Within 30 seconds, press and hold the PAIR button located on the back of the Transmitter. 4. When your Transmitter and additional Receiver are paired, the wireless status lights on the top of both units will turn solid blue. 5. Repeat steps for any additional Receivers. INPUT OUTPUT Audio In L Power Pair R

TRI-BAND WIRELESS AUDIO ADAPTER Owner’s Manual (Additional Tri-Band Wireless Receiver) (Transmitter) (Receivers) Thank you for choosing SVS! The following instructions will help you setup additional Tri-Band wireless Receivers with your SVS SoundPath Tri-Band Wireless Audio Adapter. Before proceeding, please complete the setup and pairing instructions for the primary Transmitter/Receiver kit. Installation requires only a few simple steps. If you have questions about subwoofer or speaker placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter, please contact the SVS Sound Experts tech support 7-days-a-week. [email protected] | 877.626.5623 | www.svsound.com Adding Additional Wireless Receivers A single SVS SoundPath Tri-Band Wireless Audio Adapter Transmitter can wirelessly connect and transmit a signal to up to six (6) Receivers. Before Pairing Confirm the primary SoundPath Tri-Band Wireless Audio Transmitter and Receiver are paired. Successful pairing will be indicated by a steady blue light on both the transmitter and receiver. It is important to put the Receiver in pairing mode first, before the Transmitter. If done in reverse, they will appear to pair but lose connection after 60 seconds. Steps for Pairing Additional Receivers with Transmitter 1. Power down any Receivers currently paired with the Transmitter. This can be done by disconnecting the power supply cable. 2. Connect additional Receiver to subwoofer or speakers via RCA cable and connect power cord via USB or AC power outlet. A slow flashing light indicates the unit is not paired. 3. Press and hold the PAIR button located on the back of the Receiver until the blue LED light located on the top of the unit flashes quickly. 4. Within 30 seconds, press and hold the PAIR button located on the back of the Transmitter. 5. When your Transmitter and additional Receiver are paired, the wireless status lights on the top of both units will turn solid blue. 6. Power up any Receivers that were powered down in step #1. 7. Repeat steps for any additional Receivers. INPUT OUTPUT Audio In L Power Pair R