Swift Navigation Piksi Multi Manuals

Piksi Multi - Standalone Position Caution:​ Piksi Multi uses a powerful processor that can generate a significant amount of heat. Use caution when handling the board, as components may reach upwards of 140° F (60° C). This procedure must be performed outdoors and does not require an Internet connection. Overview This article provides instructions to obtain a Single Point Position solution using hardware from the Piksi® Multi Evaluation Kit. It is important to mention this can be possible with Duro as well. Please be sure to complete all prerequisites before proceeding with the guide. Prerequisites Installing Swift Console http://support.swiftnav.com/customer/en/portal/articles/2756825 Installing USB to Serial Adapter Drivers http://support.swiftnav.com/customer/en/portal/articles/2757197 Powering Piksi Multi http://support.swiftnav.com/customer/en/portal/articles/2746937 Connecting to Piksi Multi - USB to Serial Adapter http://support.swiftnav.com/customer/en/portal/articles/2747195 Upgrading Piksi Multi Firmware http://support.swiftnav.com/customer/en/portal/articles/2757403 GNSS Antenna Placement Guidelines http://support.swiftnav.com/customer/en/portal/articles/2770372 ​www.swiftnav.com​ | ​[email protected] ©2017-2018 Swift Navigation, Inc. All rights reserved | Version 1.1