Systium Technologies MotherBoard Ready 215 Manuals

SySTIUM® TECHNOLOGIES MotherBoard ReadyTM System • MODEL 215 Copyright © 2013, SySTIUM® Technologies, LLC PN: 90215-00 Rev 00 USER QUICK START GUIDE Product Safety Warnings WARNINGS Ensure that the computer is disconnected from its power source and from all telecommunications links, networks, or modem lines whenever the chassis cover is removed. Do not operate the computer with the cover removed. AVERTISSEMENT Assurez vous que le système soit débranché de son alimentation ainsi que de toutes les liaisons de télécomunication, des réseaux,et des lignes de modem avant d’enlever le capot. Ne pas utiliser le système quand le capot est enlevé. WARNUNG Das System darf weder an eine Stromquelle angeschlossen sein noch eine Verbindung mit einer Telekommunikationseinrichtung, einem Netzwerk oder einer Modem-Leitung haben, wenn die Gehäuseabdeckung entfernt wird. Nehmen Sie das System nicht ohne die Abdeckung in Betrieb. AVVERTENZA Prima di rimuovere il coperchio del telaio, assicurarsi che il sistema sia scollegato dall’alimentazione, da tutti i collegamenti di comunicazione, reti o linee di modem. Non avviare il sistema senza aver prima messo a posto il coperchio. ADVERTENCIAS Asegúrese de que cada vez que se quite la cubierta del chasis, el sistema haya sido desconectado de la red de alimentación y de todos lo enlaces de telecomunicaciones, de red y de líneas de módem. No ponga en funcionamiento el sistema mientras la cubierta esté quitada Connect the Peripheral & Power Cables Connect the peripherals (Keyboard, Mouse, Video, etc.) required for correct operation of the computer system. Refer to Figure 2 on the following page. NOTE All of the external peripheral cables are designed such that the connector can only be inserted in one orientation. Check the orientation of the connector if the cable will not connect easily. Do not use excessive force to connect a cable. Check that the power cord supplied is designed and approved for power connections. If you are unsure of the power cords suitability, check with the safety approval agency in your region of the world. If the power cable supplied is not suitable please review the instructions in the section “Power Cord Replacement”. Warning The power supply voltage standby circuit is active when the computer is turned off. Ensure that the computer is disconnected from its power source and from all telecommunications links, networks, or modem lines whenever the chassis cover is removed. Do not operate the computer with the cover removed. Power Cord Replacement WARNING Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. In some cases, the power cord supplied with this system may not be compatible with the AC wall outlet in your region. If this is true, you must obtain a suitable power cord that meets the following criteria: The cord must be rated for use at the AC voltage available, with a current rating that is at least 125% of the current rating of the product. The AC plug end must be terminated in a grounding-type male plug designed for use in your region. The plug ends must be labeled or marked to indicate they have been certified by an agency acceptable in your region. The connector at the product end must be an IEC 320, sheet C13, female connector (or the equivalent EN 60 320 connector). The cord must be less than 14.8 feet (4.5 meters) long and, for use in Europe, be created with (harmonized) or VDE certified cordage.