T&D RTR-500NW Manuals

Making Initial Settings via "RTR-500W for Windows" Basic Settings 11 By opening "RTR-500W Settings Utility", the settings window will automatically open. 21 Enter the following information in the [Base Unit Settings] window, and click [Apply]. Base Unit Name Assign a unique name for each Base Unit. LAN Password Enter the password here for connecting to a Base Unit via a network. 31 Click [Clock Settings] in the settings window. 41 Set the desired setting in the Current Time column. Check the contents of your selections and click [Apply]. Network Settings 11 Click [Network Settings] in the settings window. 21 Make settings for DHCP. Normally, there is no need to change the network settings. If you wish to use a static IP address, for example in a corporate network, set [DHCP] to "OFF" and enter the IP address and other necessary information for each device. 31 If you are using an RTR-500AW, make sure to enter the following settings in conjunction with the wireless LAN access point being used. * The MAC address of the RTR-500AW can be found under [Settings Table] > [Base Unit Settings] > [MAC address]. 41 Click [Apply]. Initial Settings of RTR-500NW/500AW Base Unit Name RTR-500NW_ or RTR-500AW_ LAN Password password Network Settings DHCP: ON Communication Port Number 62500 Registering a Remote Unit via "RTR-500W for Windows" 11 Click [Remote Unit Settings] in the settings window. With both the target Remote Unit and Battery Charge Dock nearby, click [Register]. 21 When the [Connect a Remote Unit] dialog box appears, unplug the USB cable from the Base Unit (1) and plug it into the Battery Charge Dock* (2). USB Connection RTR-6BD 1 2 * The Battery Charge Dock (RTR-6BD) needs to be purchased separately. If the screen does not change after connecting the Remote Unit: The USB driver installation may not have been installed correctly. Please see [Help for Unit Recognition Failure] in RTR-500W for Windows, and check the USB driver. 31 The [Remote Unit Registration] window will appear. Enter the desired Remote Unit Name and click [Register]. 41 After registering your Remote Unit, reconnect the USB cable to the Base Unit. 51 If you wish to register other Remote Units, repeat procedures 1 to 4. Making Remote Unit Settings via "RTR-500W for Windows (for RTR-601)" Remote Unit Clock and Operational Settings 11 From the Start Screen or Start Menu, open "RTR-500W for Windows (for RTR-601)" > "RTR-500W Settings Utility for RTR-601". 21 In the main window, right click the target Base Unit in the device list, and select [Base Unit Settings] in the pop-up menu. 31 To make or change clock settings, select the target Remote Unit, click [Clock Settings] and make settings. 41 To make or change operational settings, select the target Remote Unit, click [Properties], make settings and click [Apply]. By setting [Enable Download] to ON here, the Base Unit will automatically download recorded data from the Remote Unit and send via FTP or E-mail to a designated address at the set interval. 51 Make settings for other Remote Units by repeating procedures 3 and 4. After completing the above, Remote Units are ready to start recording. Remote Unit Settings can also be changed or added later via LAN. Installing a Base Unit If the target Base Unit is connected to a PC, disconnect the USB cable. 11 (For RTR-500NW Only) Connect a LAN cable to the Base Unit. 21 Connect the supplied AC adaptor. BLINKING ON ON in about 30 sec... OFF If the DIAG LED remains on or continues blinking, some settings have not been completed or are invalid. For details, please see [ LED Lamp Display] printed on the back side of this paper. 31 Deploy Remote Unit(s), checking their signal strength. The wireless communication range, if unobstructed and direct, is about 50 meters. • To check the signal strength, see [ How to Check the Wireless Signal Strength]. • By using a Repeater, it is possible to extend the wireless communication range. For details, see [ Extending Wireless Communication Range with Repeater(s)]. RTR-500NW/500AW Introductory Manual for Use with RTR-601 Series What can the RTR-500NW/500AW do? RTR-500NW and RTR-500AW are Base Units equipped with a LAN interface. They can be set up to periodically download recorded data from Remote Units (RTR-601 Series) and automatically send data to an FTP server. Recorded data stored in the server can be viewed anytime and anywhere on a PC. Terms to be Used Base Unit RTR-500NW, RTR-500AW Remote Unit RTR-601 Series (RTR-601-110 / 601-130 / 601-E10 / 601-E30) RTR-601 Series is also referred to as simply "RTR-601" in this document. Repeater RTR-500 Recorded Data Measurements stored in the Remote Unit Installing "RTR-500W for Windows" 11 Start Windows and login using a User Account with Administrator (Computer Administration) rights. 21 Insert the attached CD-ROM in the CD/DVD drive. 31 The [Install Program] window will appear. If the [Auto Play] window appears: Click [Run start.exe]. If the [Install Program] window does not appear automatically: Double click [start.exe] in the CD/DVD drive. 41 Select “Install RTR-500W for Windows” and click [Execute] to start the installation. 51 Follow the directions as they appear to complete the installation. If a window appears such as the one below during installation, click [Install]. 61 After installation is completed, "RTR-500W for Windows" will appear in the Windows Start Screen or Start Menu. Installing "RTR-500W for Windows (for RTR-601)" 11 Download and install "RTR-500W for Windows (for RTR-601)" from T&D Website. • HOME > Support > Downloads > Software • After installation is completed, you will see "RTR-500W for Windows" and "RTR-500W for Windows (for RTR-601)" in the Windows Start Screen or Start Menu. Connecting the Base Unit to a PC 11 Open "RTR-500W for Windows" from the Start Screen or Start Menu. 21 In the displayed launcher window, click and open the "RTR-500W Settings Utility". Launcher Window 31 Connect the Base Unit with the supplied USB cable to your computer. The USB driver installation will start automatically. • It is not necessary to connect the LAN cable or AC adaptor at this point. 41 After the USB driver installation is completed, the Base Unit settings window will open automatically. If the above settings window does not appear automatically: The USB driver installation may not have been installed correctly. Please see [Help for Unit Recognition Failure] and check the USB driver. Getting Ready Before Using Do not connect the Base Unit to your computer until the software has been installed1 T&D CORPORATION © Copyright T&D Corporation. All rights reserved. 2016. 09 16504390029 4th Edition http://www1tandd1com Remote Unit RTR-601 Series Base Unit RTR-500NW / RTR-500AW Change Settings FTP Server Save View Auto-Download and Sending of Data Repeater RTR-500 (if necessary)

Network Base Station RTR-500NW RTR-500AW © Copyright T&D Corporation. All rights reserved. 2010.XX 165XXXXxxxx (1st Edition) Introductory Manual Thank you for purchasing our product. This manual explains in brief how to get an RTR-500NW/500AW unit ready for use and how to install the software. Details about how to use the software "RTR-500W for Windows" and its functions can be found in the software "Operation Guide (Help)".

Details about how to use the software "RTR- 500W for Windows" and its functions can be found in the software "Operation Guide (Help)". Network Base Station RTR-500NW RTR-500AW © Copyright T&D Corporation. All rights reserved. 2016.12 16507060062 (8th Edition) Introductory Manual Thank you for purchasing our product. This manual explains in brief how to get an RTR-500NW/500AW unit ready for use and how to install the software.