Tanita innerScan Dual RD-545 Manuals

EU Representative TANITA Europe B.V. EU Representative TANITA Europe B.V. Mumbai 400 059 India Dual Frequency Body Composition Monitor RD-545 Quick Start Guide ・The product design and specifications may be changed at any time without prior notice. ・The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such mark by Tanita Corporation is under license. ・Android is a trademark of Google Inc. Specifications RD-545 Weight Capacity 200kg/440lb/31st6lb Weight Increments 0-100kg/0.05kg 100kg-200kg/0.1kg 0-200lb/0.1lb　200-440lb/0.2lb 0-15st0lb/0.1lb 15st0lb-31st6lb/0.2lb Personal Data 4 memories Power Supply 4×AA Alkaline batteries(included) Power Consumption 120mA Maximum Measuring Current 50kHz, 6.25kHz, 100µA Front Battery Cover Up / Recall Button Weight-Only / Of Button SET / Communication Button Down / Item Select Button Features and Functions Back Accessories Location Code Quick Start Guide AA-Size Batteries (4) Battery Box Not allowed to mix batteries with consumer wastes! As consumer you are legally bound to return used or discharged batteries. You can deposit your old batteries at the public collecting points in your town, or wherever the corresponding batteries are sold and specifcally marked collecting boxes have been set up. In case of scrapping the apparatus, the batteries should be removed from it and deposited at the collecting points as well. ©2017 TANITA Corporation RD-5457611(0)-1601FA See the instruction manual for details. www.tanita.eu/help-guides Applicable Age Range Body Mass Index 5-99 years old 5-99 years old Total & Segmental Body Fat (%) 18-99 years old Total & Segmental Muscle Mass 18-99 years old Physique Rating 18-99 years old Bone Mass 18-99 years old Vesceral Fat Level 18-99 years old Basal Metabolic Rate 18-99 years old Metabolic Age 18-99 years old Body Water (%) 18-99 years old Total & Segmental Muscle Quality Disposal This is an electronic device. Please dispose of it as an electronic device, not as general household waste. Please follow the regulations in your local region when disposing of this device. Do not attempt to disassemble the monitor. Do not modify this equipment in any way. Do not wash the monitor in water. Do not submerge this monitor in water. Doing so may damage the monitor or cause it to malfunction. Keep away from water. Doing so may damage the monitor or cause it to malfunction. Do not use or store this monitor in the following locations. ·Locations that are exposed to direct sunlight, near to heaters, or exposed directly to air from air conditioning units, etc. ·Locations where there are severe temperature changes or a large amount of vibration. ·Locations with high levels of humidity or moisture Do not use boiling water, benzene, thinner or alcohol, etc. to clean the monitor. If the monitor becomes dirty, soak a soft cloth in water or neutral household detergent, wring it out thoroughly and wipe the monitor clean, then use a dry cloth to wipe the monitor dry. Another person should assist persons with disabilities who may not be able to take a measurement alone. Be sure to insert the batteries with the polarities (+, -) in the correct position. If the batteries are incorrectly inserted, battery fluid may leak and damage the floor. (If you do not intend to use this monitor for a long period of time, it is advisable to remove the batteries before storage.) Do not step on the monitor when your body is wet (immediately after a shower or bath, etc.) Be sure to thoroughly dry your body and feet before using the monitor. Failure to do so may cause you to slip or fall, resulting in injury. Also, the monitor cannot take accurate measurements if your body or feet are wet. Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and accurate measurement. Do not use the monitor near other products such as microwave ovens that emit electromagnetic waves. Doing so may cause the monitor to malfunction, preventing accurate measurements. Avoid excessive impact or vibration to the monitor. Doing so may damage the monitor or cause it to malfunction,or may cause setting to be erased. Always… SET Button Of Button Insert the batteries Set your location code Getting Accurate Readings Preparations before Use To ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not undress, always remove your socks or stockings, and be sure the soles of your feet are clean before stepping on the measuring platform. Be sure that your heels are correctly aligned with the electrodes on the measuring platform. Don’t worry if your feet appear too large for the unit accurate readings can still be obtained if your toes overhang the platform. It is best to take readings at the same time of day. Try to wait about two hours after rising, eating, or hard exercise before taking measurements. While readings taken under other conditions may not have the same absolute values, they are accurate for determining the percentage of change as long as the readings are taken in a consistent manner. To monitor progress, compare weight and body fat percentage taken under the same conditions over a period of time. An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting position. Different locations across the world have different gravitational pulls. These differences affect the accuracy of the weight measurement. You can obtain the most accurate weight readings by selecting the correct gravity setting on the scale according to your geographical location. 1.When the power is turned off, press any of the　 　　　 buttons to start configuring the settings. 2.Refer to the map enclosed, and press the 　　 buttons to select your location code. 3.Press the　 button to enter and save the setting. Please note that the included batteries from factory may have decreased energy levels over time. Note Up Button Down Button Ball-of-foot Electrodes Grip Illumination Control Panel Heel Electrodes Display Screen