Teknim TFS-3193 Series Manuals

Issue Date: 11/12/2017 Rev:01 Important Warnings General ✓ Before using the device read this manual carefully. Keep it just in case of necessity. ✓ Abide all the rules and precautions stated in the manual. Follow all the instructions one by one. ✓ Keep the devices away from water and moisture Service Do not try to fix the device on your own. Removal of cover may end up with electricity shock. In case of any defect or malfunction, contact with your dealer or with authorized service. All the technical interventions have to be done by technicians of company. Malfunctions that require technical service In case of any malfunction or below conditions contact with your authorized service, ✓ When Mains cable or the plug is harmed, ✓ Contact of device with a fluid, ✓ Exposure of rain and water, ✓ Fell down of device or harmed outer cover, ✓ Serious performance fall on the device, ✓ Depending on the instructions stated in manual, if your device not working properly Contact with your authorized service in such terms. Maintenance on your own Do not try to fix the device on your own. Removal of cover may end up with electricity shock. In case of any defect or malfunction, contact with your dealer or with authorized service. All the technical interventions have to be done by technicians of company. Device must be cleaned up with a dry fabric. No-chemicals are allowed for cleaning Transportation Device must be carefully transported avoiding all physical bump, stroke and possible fluid entry. Malfunctions that caused by improper transportation is not under warranty. Human and Environmental Health This device contains no chemical or biological elements that could harm human condition. Sub Models TFS-3193R Conventional Fire Alarm Strobe, Red TFS-3193W Conventional Fire Alarm Strobe, White Technical Features TFS-3193R TFS-3193W Power Input 24VDC – 28VDC 24VDC – 28VDC Alarm Current Consumption ~6 mA ( @24VDC ) 145mW ~6 mA ( @24VDC ) 145mW Leds Wide Angle 7 bright LEDs (RED) Wide Angle 7 bright LEDs (WHITE) IP Class IP21C IP21C Operating Temperature Range -10C ~ 55C -10C ~ 55C Humidity @ +40°C between %0 to %95 Max @ +40°C between %0 to %95 Max Dimensions (mm) Ø:110mm, h:55mm Ø:110mm, h:55mm Housing Material Red, UL94 fireproof ABS White, UL94 fireproof ABS Kullanılan Kablo Kesiti 0.28mm ² ~ 1.5mm ² 0.28mm ² ~ 1.5mm ² Ağırlık (taban dahil / taban hariç) coverage zone W-2,4-4 Usage Area Internal indoor use Terminals Number 1 To next siren Negative (-)power out Number 2 Negative (-)power input Number 3 To next siren Positive (+)power out Number 4 Positive (+) power input EN 54-23 Visual Alarm Devices Mounting and Connection 1. Remove the head of the siren from the base. 2. Mount the base part on the wall, using 2 of the 4 markings marked on the base. Warning: Do not attempt to remove the electronic board from its plastic case. The electronic board is closed for your safety. Users should avoid from interference. TFS-3193 Convensional Fire Alarm Strobe Installation & Operating Guide