Teknion Interpret Manuals

Sliding Worksurface Kit (WWSSL), Sliding Worksurface (WWWRS) Part and Product Identification Section: Description: Page No: Date: Rev. No: 4 SLIDING WORKSURFACE KIT, SLIDING WORKSURFACE AND FRAME - DOUBLE SIDED FRAMES, SUPPORTS AND WORKSURFACES Sept 2017 1 of 10 INT_005a interpret Installation Guides A - Double Sided Frame - type and quantities as per order B1 - Sliding Worksurface Track (A16-4964) x 1 B2 - Sliding Bushing (B02-0377) x4 B3 - Disengagement Washer (B02-0378) x4 B4 - 1/4 - 20 X 1.25 Pan Head, Quadrex, Screw (E01-0182) x4 B5 - 5/16-18X2 Long, Socket Head, Cap Screw (E01-0764) x3 or x5 B6 - 5/16-18X1/2 Hex Nut, AF, .265 Nut (E01-0755) x3 B7 - Sliding Worksurface Standoff (B02-0383) x3 C1 - Sliding Worksurface Lock Assembly (N02-2105) x1 C2 - 1/4-20X30mm Murakoshi Bolt (E03-0444) x2 WWSSLD WWWRS E - Sliding Worksurface (WWWRS) x2 per Frame Angled Leg Frame shown A E B2 B5 B1 B7 A C2 C1 A NOTE: The Cantilevers included in the Double Sided Frame Assembly (A16-4882\12) are not required for this application. N02-2054 x2 N02-2105 x2

Part and Product Identification Section: Description: Page No: Date: Rev. No: 6 HEIGHT ADJUSTABLE CANTILEVER, PUCKS AND BOLT KIT - DOUBLE SIDED FRAMES, SUPPORTS AND WORKSURFACES Jun 2017 1 of 11 INT_007a interpret Installation Guides Height Adjustable Stacker Pucks (WWSPK), Bolt Kit (WWSBK) and Height Adjustable Cantilever (WWSCT) B1 - Height Adjustable Threaded Rod (E01-0795) x 1 For Customer Support please contact [email protected] A B2 - 1/4 - 20 UNC. Nut Hex Keps Zinc (E03-0059) x 1 B3 - 5/16 -18 Socket Head Cap Screw (E01-0781) x 4 for 1" increment or (E01-0778) x 4 for 2" increment or (E01-0780) x 4 for 3" increment C1 - Center Rail Height Adjustable Bracket (A15-9865) 48" - 60" Length x4 66" - 96" Length x8 C2 - Center Rail Height Adjustable Clamp (A16-4966) 48" - 60" Length x2 66" - 96" Length x4 C3 - Worksurface Spacer Block (A25-0547) 48" - 60" Length x2 66" - 96" Length x4 A - Height Adjustable Stacker Puck (WWSPK) 2 per each inch increment B4 - 5/16 - 18 Hex Nut, 1/2 A/F .265 Thick (E03-0755) x 4 C4 - 1/4-20x5/8" Machine Screw, Black Quad, Truss (E01-0113) 48" - 60" Length x8 66" - 96" Length x16 C5 - #10 x 0.875" Long Screw Quad Pan Washer (E07-0077) 48" - 60" Length x8 66" - 96" Length x16 C6 - 5/16 - 18 x 3.5 Length Hex Cap (E01-0758) 48" - 60" Length x4 66" - 96" Length x8 C7 - 5/16 - 18 Hex Nut, 1/2 A/F .265 Thick (E01-0755) 48" - 60" Length x4 66" - 96" Length x8 C1 C3 C2 Worksurface (WWWRW) B - WWSBK x2 NOTE: Double Sided Complete Frame shown as example. Please refer to Installation Guide INT_001 & INT_002 for Frame assembly instructions.

Double Access Door (WWEDD) & Audio Visual Table Tray (WWEAV) Part and Product Identification For Customer Support please contact [email protected] Section: Description: Page No: Date: Rev. No: 1 Feb. 2017 1 of 8 INT_410 interpret A1 - Double Access Door (WWEDD) x 1 A2 - Access Door Bracket (A16-1336) x 2 A3 - 8-32 x 5/16 Machine Screw (E01-0837) x 4 A4 - 10-32 x 1/2" Machine Screw (E01-0770) x 4 WWTWK Shown as Example B1 - Clubtalk Grommet Enclosure Subassembly (N09-6286) x 1 B4 - Power Bar Shroud, Clubtalk (A16-1970) x 1 B2 - Slim Power Bar (YEPDCH) x 1 Please Refer to CLUBtalk Installation Guide No. 602b for CLUB CONNECT TechnologyInformation. A - WWEDD x 1 B - WWEAV x 1 A B2 B1 B5 - #10 x 0.875" LG. Screw, Quad. Pan Washer (E07-0077) x 4 B3 - Compact Power Bar (YEPS) x 1 B3 B4

Section: Description: Page No: Date: Rev. No: 8 Feb 2017 1 of 17 INT_002a interpret Double- Sided Beginning Frame (WWSDB), Power Cut-Out Worksurface (WWWRP) Part and Product Identification AA - Angled Leg Assembly (N02-3687) x1 For Customer Support please contact [email protected] AA AE2 AF Power Cut Out Worksurface (WWWRP) x as per order Angled Leg 78" Frame Assembly shown Power Access Doors (WWEDR) For installation see Electrics section, IG# INT_404 AG AE1 NOTE: Quantities of Front Standoff (AG), Spacer (AN) and Hardware (AI), (AL) & (AM) change with the length of the Frame. OR AB - Straight Leg Assembly (N02-3686) x1 AC - Mid Gable Assembly (N02-2053) x1 AD1 -Transverse Beam Assembly (N02-3688) x3 AD2 -5/16-18x2.5 Socket Head Cap Screw (E01-0756) x24 AD3 -5/16-18 Hex Nut 1/2 A/F .265 Th. (E01-0755) x24 AE1 - Central Rail Cap (A23-4058) x1 AE2 - Central Rail Assembly (A21-0888) x1 AG - Front Standoff (B02-0658) 48"-72" x2 78"-96" x4 AF - Central Rail Cap Assembly (N02-2149) x1 AH - Cantilever Brkt (A16-4882\12) x2 AI - #10x0.875" LG Quad, Pan Wash. (E07-0077) 48"-72" x4 78"-96" x8 AJ - 1/4-20x3-1/2 Fl Mach. Quadrex (E01-0771) x4 AK1 - Worksurface Spacer Block (A25-0547) x4 AK2 - 5/16-18x3.75 Hex Cap Screw (E01-0799) x10 AK3 - 5/16-18 Hex Nut1/2 A/F.265 (E01-0755) x10 Pre assembled X02-0116 x1 Leveler Cover is located inside Leg, assembled and secured in place with tape. N02-2090 x1 AM - 5/16-18 Hex Nut, 1/2 A/F.265 (E01-0755) 78"-96" x4 AL - 5/16-18 x 2 1/2 LG, Hex, Zinc (E01-1136) 78"-96" x4 AN - Spacer Bracket (A25-0548) 78"-96" x4 AC AD1 AK1 AH AN