-
Portable Station Connect
1
-
TABLE OF CONTENTS
2
-
This manual covers the BTR-300 Base Station
3
-
The system operates on selected frequencies
4
-
BTR-300 BASE STATION TRANSCEIVER
5
-
The RadioCom Model BTR-300 is a Base
6
-
CONTROLS and CONNECTIONS
7
-
External Intercom Switch, Level Control,
8
-
TR-300 BELT-PACK TRANSCEIVER
11
-
2 separate antennas, one for transmit, the
12
-
External Controls, TR-300
13
-
Internal controls, TR-300
14
-
Unpack your BTR-300 and TR-300 System. If
15
-
Pin Wiring for Rear Panel Jacks
16
-
To rack mount the BTR-300 base transceiver
17
-
The BTR-300 is supplied with two (2) anten-
18
-
Remoting Antennas: It will be necessary to
19
-
The Telex Wireless Intercom System is “Ver-
20
-
Attempting to operate the wireless intercom
21
-
LOCAL HEADSET CONNECTION
22
-
INTERCONNECTION to a HARD-WIRED
23
-
Connecting Two BTR-300’s
24
-
Inset the headset/microphone into the connec-
25
-
Following the instructions fully to this point,
26
-
If you have followed the instructions until this
27
-
You should now be ready to turn the TR-300
28
-
Select the TR-300 portables that will be used
29
-
SETTING SYSTEM GAIN LEVELS
30
-
If the audio volume at the intercom input is
31
-
Reread the sections of this manual to make
32
-
Improper battery selection, use, installation,
33
-
BC-300NM2 BATTERY CHARGER
34
-
AB-300 Microphone Stand/Surface Mount
35
-
CUSTOMER SERVICE INFORMATION
36
-
Made in U.S.A
38