Tennant T12 Manuals

8 pdf manual(s) Tennant T12 for free download (Document Types: Instruction bulletin, Operator's manual, Parts manual)

Tennant T12 Instruction bulletin [PDF] (4 pages)

  • Identifier: id-2311754
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Product Performance Metrics, Initial Startup Checklist, Risk Mitigation and Accident Prevention
  • UPD Date: 24.05.2026
  • Source File: 1975870.pdf
  • Pages: 4
  • Description: Manual for installation and usage of the Tennant T12.
Pages Preview:
  • IB 9020661 (01- 2021) 2 3. Jack up the front end of the machine enough to access the drive wheel assembly. Place jack stands under the machine and lower the machine onto the jack stands. See MACHINE JACKING in the MAINTENANCE section of the OPERATOR MANUAL for additional instructions and safety information. FOR SAFETY: When servicing machine, block machine tires before jacking machine up. Use a hoist or jack that will support the weight of the machine. Jac
  • IB 9020661 (01- 2021) 3 13. If necessary, tighten the hex screws (Qty. 4) to the correct torque. 14. Reinstall the main brush(es) and side brush(es) onto the machine. 15. Start and test the machine. Machine should move freely when operated in both forward and reverse, and when cornering. 1 2 3 4 Socket screws (Qty. 6) Flange screws (Qty. 4) FIG. 5
  • IB 9020661 (01- 2021) 4 Bill Of Materials For Wheel And Hub Kit, Red [T16] - 9020660 Ref. Tennant Part No. Description Qty. 1 9020657 ) Vr, Hub, Alm 1 2 9020658 Vr, Screw Kit 1 3 9008544 Vr, Tire Kit, Puller 1 4 9008545 Vr, Wheel, Pyu [300X100 Red] 1 Bill Of Materials For Wheel And Hub Kit, Blue [T16] - 9020681 Ref. Tennant Part No. Description Qty. 1 9020657 ) Vr, Hub, Alm 1 2 9020658 Vr, Screw Kit 1 3 9008544 Vr, Tire Kit, Puller 1 4 9012602 Vr, Wheel, P
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IB 9020661 (01- 2021) 1 INSTRUCTION BULLETIN No. 9020661 Machine: T12/T16 Published: 01- 2021 Rev. 00 NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts List in the appropriate place in the machine manual for future reference. Retaining the Parts List will make it easier to reorder individual parts and will save the cost of ordering an entire kit. NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials. Installation instructions for kit number 9020660, 9020681, 9020685, and 9020686 Kit installation must be performed by TennantTrue service or an authorized service provider. SYNOPSIS: This kit contains the parts needed to replace the drive wheel/drive wheel hub on T12/T16 scrubbers. Please follow step-by-step instructions. SPECIAL TOOLS / CONSIDERATIONS: NONE (Estimated time to complete: 1 hour) PROTECT THE ENVIRONMENT Please dispose of packaging materials, used machine components such as batteries and fluids in an environmentally safe way according to local waste disposal regulations. Always remember to recycle. PREPARATION: FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine, and remove key. 1. If scrub head is not raised, turn key switch ON, completely raise the scrub head, and turn key switch OFF. 2. Turn the steering wheel as far to the left as possible. 3. Remove the main scrub brush(es) and side scrub brush(es) from the machine. Set all scrub brushes aside. INSTALLATION: 1. Place a chock behind both rear tires. 2. Remove the socket screws (Qty. 4) from the front wheel assembly. Discard the socket screws. (Fig. 1) FIG. 1

Tennant T12 Instruction bulletin [PDF] (6 pages)

  • Identifier: id-1658888
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, Additional Modules and Accessories Guide, Information on Regular Maintenance
  • UPD Date: 27.03.2026
  • Source File: 1659841.pdf
  • Pages: 6
  • Description: Step-by-step user manual for the Tennant T12.
Pages Preview:
  • IB 9010945 (07- 2014) 2 INSTALLATION: Scrub head pivot arm (connected to frame of machine) Scrub head actuator (connected to pivot bracket) Scrub head links (connected to frame of machine) Remove and save clevis pin and cotter pin Remove and save M8 hex screw, washer, and sleeve Remove and save M8 hex screw, washer, and sleeve Remove and discard M8 hex screw, washers, and lift pivot Remove and discard M8 hex screw, washers, and lift pivot FIG. 1 1. Disconn
  • IB 9010945 (07- 2014) 3 Hose clamp Solution supply hose Water solenoid valve Connect main wire harness to front brush motor Connect main wire harness to rear brush motor FRONT FIG. 2 7. Position two jack stands at the designated locations under the front of the machine and lower the machine onto the jack stands. FOR SAFETY: When servicing machine, block machine tires before jacking machine up. Use a hoist or jack that will support the weight of the machine
  • IB 9010945 (07- 2014) 4 14. Use the previously removed clevis pin and cotter pin to connect the scrub head actuator to the scrub head. 15. Use one M8 hex screw (1), one flat washer (2), and one flat washer (7) to connect each pivot (3) and both scrub head links to the scrub head. Torque both M8 hex screws to 20 Nm (15 ft. lb.). (Fig. 3) 16. Use saved hardware to connect the scrub head pivot arm to the scrub head. Torque both M8 hex screws to 20 Nm (15 ft.
  • IB 9010945 (07- 2014) 5 17. Raise the machine off the jack stands, remove the jack stands from under the machine, and lower the machine to the floor. 18. Use a clevis pin (4) and cotter pin (5) to install the left scrub head squeegee assembly and right scrub head squeegee assembly onto the scrub head. (Fig. 4) 19. Use a M5 hex screw (6) to secure the cotter pins (5) to the scrub head assembly. (Fig. 4) 20. Adjust the left scrub head squeegee assembly and r
  • IB 9010945 (07- 2014) 6 21. Reconfigure the machine. Refer to the Service Manual for instructions how to reconfigure the machine for the new disk scrub head. 22. Test machine: Start machine. Ensure scrub head moves through entire range of motion and the brushes function properly. Check the brush pattern and adjustment and make adjustments. Refer to the Service Manual for instructions how to check the brush pattern and make adjustments. Bill Of Materials Fo
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IB 9010945 (07- 2014) 1 INSTRUCTION BULLETIN No. 9010945 Machine: T12 Published: 07- 2014 Rev. 00 NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts List in the appropriate place in the machine manual for future reference. Retaining the Parts List will make it easier to reorder individual parts and will save the cost of ordering an entire kit. NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials. Installation instructions for kit number 9009811 SYNOPSIS: This kit contains the parts needed to install a disk scrub head onto a T12 scrubber. Please follow step-by-step instructions. SPECIAL TOOLS / CONSIDERATIONS: NONE (Estimated time to complete: 4 hours) PROTECT THE ENVIRONMENT Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe manner according to local waste disposal regulations. Always remember to recycle. PREPARATION: 1. Park the machine on a clean level surface, completely lower the scrub head, turn off the machine, and remove the key. FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine, and remove key. 2. Disconnect the battery cable from the machine. WARNING: Always disconnect battery cables from machine before working on electrical components.

Tennant T12 Instruction bulletin [PDF] (8 pages)

  • Identifier: id-1658889
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Documentation and Revision History, Periodic Inspection Checklists, System Connectivity and Wiring Basics
  • UPD Date: 15.06.2026
  • Source File: 1659840.pdf
  • Pages: 8
  • Description: Maintenance instructions for the Tennant T12.
Pages Preview:
  • IB 9010958 (08- 2013) 2 5. Connect the overhead guard light wire harness (9) to the strobe light (1). (Fig. 1 / Fig. 3 / Fig. 4) 6. Route the overhead guard light wire harness (9) down to the main wire harness and connect the harness to the main harness. (Fig. 1 / Fig. 3 / Fig. 4) 7. Insert two tie clips (11) into the overhead guard. (Fig. 1) 8. Use two cable ties (10) to secure the overhead guard light wire harness (9) to tie clips (11) in the overhead gu
  • IB 9010958 (08- 2013) 3 NOTE: Complete Step 10 through Step 14 only if machine is not equipped with optional headlights. Proceed to Step 15 if machine is equipped with optional headlights. 10. Carefully remove the control panel from the machine. Do not break any wire connections. Set the hardware aside. (Fig. 2) 11. Remove the hole plug from the control panel. Discard the hole plug. (Fig. 2) 12. Insert the rocker switch (14) into the control panel where th
  • IB 9010958 (08- 2013) 4 FIG. 3 - Main Wire Harness
  • IB 9010958 (08- 2013) 5 FIG. 4 - Schematic
  • IB 9010958 (08- 2013) 6 15. Remove the access panel from the steering channel. (Fig. 5) FIG. 5 16. Remove the M8 hex screw securing the bottom of the circuit breaker bracket to the machine. (Fig. 6) FIG. 6 17. Loosen the M8 hex screw securing the top of the circuit breaker bracket to the machine. (Fig. 6) 18. Pull circuit breaker bracket out far enough to access the main wire harness connectors located behind the bracket. (Fig. 6) 19. Machines without fron
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IB 9010958 (08- 2013) 1 INSTRUCTION BULLETIN No. 9010958 Machine: T12 Published: 08- 2013 Rev. 00 NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts List in the appropriate place in the machine manual for future reference. Retaining the Parts List will make it easier to reorder individual parts and will save the cost of ordering an entire kit. NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials. Installation instructions for kit number 9010351 SYNOPSIS: This kit contains the parts needed to install a warning light onto T12 scrubbers equipped with an optional overhead guard. Please follow step-by-step instructions. SPECIAL TOOLS / CONSIDERATIONS: NONE (Estimated time to complete: 1.5 hours) PROTECT THE ENVIRONMENT Please dispose of packaging materials, used machine components such as batteries and fluids in an environmentally safe way according to local waste disposal regulations. Always remember to recycle. PREPARATION: 1. Park the machine on a clean level surface, turn off the machine, and remove the key. FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine, and remove key. 2. Disconnect the battery cable from the machine. WARNING: Always disconnect battery cables from machine before working on electrical components. INSTALLATION: 1. Insert the rubber grommet (8) into the hole in the overhead guard. (Fig. 1) 2. Route the strobe light (1) wires down through the rubber grommet (8) in the overhead guard. (Fig. 1) 3. Use two M5 pan screws (2), two flat washers (3), and two M5 hex nuts (4) to install the strobe light (1) onto the overhead guard. (Fig. 1) 4. Use two M6 hex screws (6) and two flat washers (7) to install the light guard (5) onto the overhead guard. (Fig. 1)

Tennant T12 Instruction bulletin [PDF] (4 pages)

  • Identifier: id-1658903
  • Brand: Tennant
  • Device: T12 Cleaning Equipment
  • Type: PDF
  • Key Aspects: Unpacking and Inspection Guidelines, Package Contents and Accessories List, Step-by-Step Assembly Procedures
  • UPD Date: 30.04.2026
  • Source File: 1659826.pdf
  • Pages: 4
  • Description: User reference guide for the Tennant T12.
Pages Preview:
  • IB 9010947 (05- 2013) 2 INSTALLATION: 1. Disconnect the vacuum hose from the rear squeegee assembly. (Fig. 1) FIG. 1 2. Loosen both squeegee mounting handles. (Fig. 2 / Fig. 3) FIG. 2 FIG. 3 3. Pull the rear squeegee assembly from the machine. Discard the removed squeegee assembly. (Fig. 4) FIG. 4 4. Install the new rear squeegee assembly onto the machine. 5. Connect the vacuum hose to the rear squeegee assembly. 6. Level the rear squeegee assembly and set
  • IB 9010947 (05- 2013) 3 1 2 3 4 5 6 7 8 8 4 5 6 7 8 8 9 10 11 12 13 9 10 11 12 13 14 15 14 15 16 17 Note: Rear squeegee assembly is shown disassembled to better show locations of parts. The rear squeegee assembly is ready for installation and Does Not need to be disassembled before being installed onto machine. FIG. 5
  • IB 9010947 (05- 2013) 4 Bill Of Materials For Squeegee Kit, Rear, CI [T12] - 9009817 Ref. Tennant Part No. Description Qty. o 9009817 Squeegee Kit, Rear, CI [T12] 1 Y 1 1200219 Frame, Sqge, Outer 1 Y 2 1200218 Frame, Sqge, Inner 1 Y 3 1200466 Clamp Wldt, Retainer, Sqge 1 Y 4 363162 Wheel, 04.0d 0.89w 0.64b 2 Y 5 363301 Sleeve, P/M, 0.34b 0.63d 1.2l, Bnz 2 Y 6 49694 Screw, Hex, M8 X 1.25 X 50, SS 2 Y 7 08713 Nut, Hex, Lock, M8 X 1.25, Nl, SS 2 Y 8 1017218 W
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IB 9010947 (05- 2013) 1 INSTRUCTION BULLETIN No. 9010947 Machine: T12 Published: 05- 2013 Rev. 00 NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts List in the appropriate place in the machine manual for future reference. Retaining the Parts List will make it easier to reorder individual parts and will save the cost of ordering an entire kit. NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials. Installation instructions for kit number 9009817 SYNOPSIS: This kit contains the parts needed to replace the rear squeegee assembly on T12 scrubbers. Please follow step-by-step instructions. SPECIAL TOOLS / CONSIDERATIONS: NONE (Estimated time to complete: 15 - 30 minutes) PROTECT THE ENVIRONMENT Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe manner according to local waste disposal regulations. Always remember to recycle. PREPARATION: 1. Park the machine on a clean level surface, turn off the machine, and remove the key. FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine, and remove key.

Tennant T12 Operator's manual [PDF] (86 pages)

  • Identifier: id-53851
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Performance Optimization Tips, Common Issue Diagnostic Flows, Detailed Installation Instructions
  • UPD Date: 28.07.2026
  • Source File: 230243.pdf
  • Pages: 86
  • Description: User instruction booklet for the Tennant T12.
Pages Preview:
  • INTRODUCTION This manual is furnished with each new model. It provides necessary operation and maintenance instructions. Read this manual completely and understand the machine before operating or servicing it. This machine will provide excellent service. However, the best results will be obtained at minimum costs if: S The machine is operated with reasonable care. S The machine is maintained regularly - per the machine maintenance instructions provided. S
  • CONTENTS 1 T12 9009910 (1--2013) CONTENTS Page Safety Precautions 4 . . . . . . . . . . . . . . . . . . . . . . . Operation 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine Components 7 . . . . . . . . . . . . . . . . . . Controls And Instruments (T12) 8 . . . . . . . . . Touch Panel (T12) 9 . . . . . . . . . . . . . . . . . . . . . Controls And Instruments (T12XP) 10 . . . . . . . Touch Panel (T12XP) 11 . . . . . . . . . . . . . . .
  • CONTENTS T12 9009910 (1--2013) 2 Page Storage Information 71 . . . . . . . . . . . . . . . . . . . . Freeze Protection 71 . . . . . . . . . . . . . . . . . . . Preparing The Machine For Operation After Storage 73 . . . . . . . . . . . . . . . . . . . . Priming The ec--H2O System 75 . . . . . . . . Specifications 77 . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Machine Dimensions/Capacities 77 . General Machine Performance 78 . . . . . . .
Document Preview & Text Transcription (Main Page)
Click to expand and read text
T12 *9009910* Rider Scrubber Operator Manual 9009910 Rev. 00 (1-2013) (Battery) North America / International To view, print or download the latest manual, visit: www.tennantco.com/manuals The Safe Scrubbing AlternativeR TennantTrueR Parts IRISt a Tennant Technology

Tennant T12 Operator's manual [PDF] (76 pages)

  • Identifier: id-1161434
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Performance Optimization Tips, Product Performance Metrics, Pre-Installation Safety Requirements
  • UPD Date: 31.05.2026
  • Source File: 996926.pdf
  • Pages: 76
  • Description: Complete installation manual for the Tennant T12.
Pages Preview:
  • INTRODUCTION This manual is furnished with each new model. It provides necessary operation and maintenance instructions. Read this manual completely and understand the machine before operating or servicing it. This machine will provide excellent service. However, the best results will be obtained at minimum costs if: � The machine is operated with reasonable care. � The machine is maintained regularly - per the machine maintenance instructions provided
  • CONTENTS 1 T12 9009918 (1−2016) CONTENTS Page IMPORTANT SAFETY INSTRUCTIONS − SAVE THESE INSTRUCTIONS 4 . . . . . . . . . OPERATION 7 . MACHINE COMPONENTS 7 . . . . . . . . . . . . . CONTROLS AND INSTRUMENTS (T12) 8 . TOUCH PANEL (T12) 9 . . . . . . . . . . . . . . . . . . CONTROLS AND INSTRUMENTS (T12XP) 10 TOUCH PANEL (T12XP) 11 . . . . . . . . . . . . . . . SYMBOL DEFINITIONS 12 . . . . . . . . . . . . . . . . INSTALLING BATTERIES 13 . . . . . . . .
  • CONTENTS T12 9009918 (1−2016) 2 Page SPECIFICATIONS 72 . . . . . . . . . . . . . . . . . . . . . . . GENERAL MACHINE DIMENSIONS/CAPACITIES 72 . . . . . . . . . GENERAL MACHINE PERFORMANCE 73 . . POWER TYPE 73 . . . . . . . . . . . . . . . . . . . . . . . . TIRES 73 . STANDARD SOLUTION FLOW RATE 73 . . . SIDE BRUSH SOLUTION FLOW RATE (OPTION) 73 . . . . . . . . . . . . . . . . . . . . . . . . . ec−H2O SYSTEM (OPTION) 74 . . . . . . . . . . . MACHINE DIM
  • SAFETY PRECAUTIONS 3 T12 9009918 (3−2013)
Document Preview & Text Transcription (Main Page)
Click to expand and read text
T12 *9009918* 9009918 Rev. 05 (6-2016) (Battery) The Safe Scrubbing Alternative� TennantTrue� Parts IRIS� a Tennant Technology Insta−Fit� Adapter Rider Scrubber English EN Operator Manual � For the latest parts manuals and other language Operator manuals, visit: www.tennantco.com/manuals

Tennant T12 Parts manual [PDF] (136 pages)

  • Identifier: id-53850
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, End-of-Life Handling and Disposal, Device Specifications Overview
  • UPD Date: 22.08.2026
  • Source File: 230241.pdf
  • Pages: 136
  • Description: User documentation for the Tennant T12.
Pages Preview:
  • Ref Part No. Serial Number Description Qty. 1 82681 (000000- ) Bracket Wldt, Lpg Mount 1  2 63810 (000000- ) Latch Assy, Lpg Tank Mtg, W/Nut 4  3 51839 (000000- ) Nut Adjustable, Lpg Tank Mtg 2 4 49263 (000000- ) Tie, Cable 3 5 82556 (000000-001039 ) Bracket, Vaporizer 1 6 54930 (000000- ) Vaporizer, LPG 1 C D A B HOW TO ORDER PARTS − See diagram above Only use TENNANT Company supplied or equivalent parts. Parts and supplies may be ordered online, by p
  • CN   CÓMO SOLICITAR PIEZAS − Consulte el diagrama anterior. Utilice sólo las piezas suministradas por TENNANT Company o piezas equivalentes. Puede solicitar las piezas a través de internet, por teléfono, por fax o por correo. Siga los siguientes pasos para que la entrega sea rápida. 1. (A) Indique el modelo de máquina. 2. (B) Indique el número de serie de la etiqueta de datos. 3. (C) Asegúrese de que indica el número de serie correcto de la li
  • GENERAL RECOMMENDED MAINTENANCE 1‐1 T12 9009916 (1−2013) General Recommended Maintenance Items Ref. Part No. Serial Number Description Qty. 1200430 (000000− ) Blade, Sqge, Side, 22.50l, Linatex 2 1202159 (000000− ) Blade, Sqge, Side, 22.50l, Ure 2 1202160 (000000− ) Blade, Sqge, Side, 22.50l, Gum 2 1200383 (000000− ) Blade, Sqge, Front, 42.59l [Linard] 1 1200384 (000000− ) Blade, Sqge, Rear, Linatex 1 1201825 (000000− ) Blade, Sqge, Front,
  • GENERAL RECOMMENDED MAINTENANCE T12 9009916(1−2013) 1‐2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
T12 *9009916* Rider Scrubber Parts Manual 9009916 Rev. 00 (1-2013) (Battery) North America / International To view, print or download the latest manual, visit: www.tennantco.com/manuals The Safe Scrubbing Alternative TennantTrue Parts IRIS a Tennant Technology

Tennant T12 Instruction bulletin [PDF] (4 pages)

  • Identifier: id-2107223
  • Brand: Tennant
  • Device: T12 Scrubber
  • Type: PDF
  • Key Aspects: Advanced Configuration Methods, Warranty and Service Information, Unpacking and Inspection Guidelines
  • UPD Date: 18.08.2026
  • Source File: 2180449.pdf
  • Pages: 4
  • Description: Official product manual for the Tennant T12.
Pages Preview:
  • IB 9020661 (07- 2021) 2 3. Jack up the front end of the machine enough to access the drive wheel assembly. Place jack stands under the machine and lower the machine onto the jack stands. See MACHINE JACKING in the MAINTENANCE section of the OPERATOR MANUAL for additional instructions and safety information. FOR SAFETY: When servicing machine, block machine tires before jacking machine up. Use a hoist or jack that will support the weight of the machine. Jac
  • IB 9020661 (07- 2021) 3 13. If necessary, tighten the hex screws (Qty. 4) to the correct torque. 14. Reinstall the main brush(es) and side brush(es) onto the machine. 15. Start and test the machine. Machine should move freely when operated in both forward and reverse, and when cornering. 1 2 3 4 Socket screws (Qty. 6) Flange screws (Qty. 4) FIG. 5
  • IB 9020661 (07- 2021) 4 Bill Of Materials For Wheel And Hub Kit, Red [T16] - 9020660 Ref. Tennant Part No. Description Qty. 1 9020657 ) Vr, Hub, Alm 1 2 9020658 Vr, Screw Kit 1 3 9008544 Vr, Tire Kit, Puller 1 4 9008545 Vr, Wheel, Pyu [300X100 Red] 1 Bill Of Materials For Wheel And Hub Kit, Blue [T16] - 9020681 Ref. Tennant Part No. Description Qty. 1 9020657 ) Vr, Hub, Alm 1 2 9020658 Vr, Screw Kit 1 3 9008544 Vr, Tire Kit, Puller 1 4 9012602 Vr, Wheel, P
Document Preview & Text Transcription (Main Page)
Click to expand and read text
IB 9020661 (07- 2021) 1 INSTRUCTION BULLETIN No. 9020661 Machine: T12/T16/ T16AMR Published: 07- 2021 Rev. 01 NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts List in the appropriate place in the machine manual for future reference. Retaining the Parts List will make it easier to reorder individual parts and will save the cost of ordering an entire kit. NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials. Installation instructions for kit number 9020660, 9020681, 9020685, 9020686, and 9021543 Kit installation must be performed by TennantTrueservice or an authorized service provider. SYNOPSIS: This kit contains the parts needed to replace the drive wheel/drive wheel hub on T12/T16/T16AMR scrubbers. Please follow step-by-step instructions. SPECIAL TOOLS / CONSIDERATIONS: NONE (Estimated time to complete: 1 hour) PROTECT THE ENVIRONMENT Please dispose of packaging materials, used machine components such as batteries and fluids in an environmentally safe way according to local waste disposal regulations. Always remember to recycle. PREPARATION: 1. If scrub head is not raised, turn key switch ON, completely raise the scrub head, and turn key switch OFF. FOR SAFETY: Before leaving or servicing machine, stop on level surface, turn off machine, and remove key. 2. Turn the steering wheel as far to the left as possible. 3. Remove the main scrub brush(es) and side scrub brush(es) from the machine. Set all scrub brushes aside. INSTALLATION: 1. Place a chock behind both rear tires. 2. Remove the socket screws (Qty. 4) from the front wheel assembly. Discard the socket screws. (Fig. 1) FIG. 1

T12: Related Instructions

1510
Tennant 1510
25.05.2026 28 pages

Carpet Extractor 1510 Model No.: 614001 Operator and Parts Manual 613907 Rev. 00 (12-02) CUSTOMER SERVICE: 1–800-982–7658 1–616–786–2330 FAX: 1–800� Product setup manual for the Tennant 1510 Floor Machine. This manual elaborates on usage procedures, service procedures, component replacement.

5680
Tennant 5680
09.08.2026 76 pages

5680 *330450* www.tennantco.com Walk--Behind Scrubber Operator Manual 330450 Rev. 08 (09-2006) North America / International The Safe Scrubbing AlternativeR (El User instruction manual for the Tennant 5680 Scrubber. The manual provides information on setup validation, safety, technical troubleshooting.

5700XP
Tennant 5700XP
12.03.2026 92 pages

5700XP *MM4001* www.tennantco.com Walk--Behind Scrubber Operator Manual MM401 Rev. 20 (09-2006) North America / International ES Extended Scrub System R The Saf Device maintenance guide for the Tennant 5700XP Floor Machine. It describes maintenance tasks and replacement parts, system setup, power requirements.

3640G/LP
Tennant 3640G/LP
13.04.2026 190 pages

330585 Rev. 01 (12--01) Service Manual 3640G/LP Manual for safe operation of the Tennant 3640G/LP Blower. The documentation guides users through setup and product maintenance, operational safety, system checks.

Nobles UltraGlide
Tennant Nobles UltraGlide
02.05.2026 2 pages

Use & Care Guide UltraGlide Upright Vacuum Tennant Company www.Nobles.com Français - verso 1025507 Rev 01 (06--06) FOR SAFETY: Do not operate vacuum unless ope Essential instructions for the Tennant Nobles UltraGlide Vacuum Cleaner. This guide explains the features and cleaning instructions, service instructions, software installation, performance optimization.

3640
Tennant 3640
25.03.2026 56 pages

3640 *330580* www.tennantco.com Sweeper Operator Manual 330580 Rev. 06 (02-2008) North America / International (Gas/LPG) Instruction guide for the Tennant 3640 Floor Machine. This documentation details procedures for component overview, error handling, wiring setup, regulatory notices.

Similar Manuals in the Cleaning Equipment, Scrubber Category

Ninja Warrior 500 PSI NWCU2250H
Prochem Ninja Warrior 500 PSI NWCU2250H
12.03.2026 52 pages

86398990-A 02/06/15 Ninja Warrior 500 PSI Extractor Operating Instructions (ENG) MODELS: NWCU2250H 10070680 NWCU2350N 10070690 From Serial Number (Re Service manual for the Prochem Ninja Warrior 500 PSI NWCU2250H Scrubber. It offers guidance on backup procedures, user settings, power requirements.

E28
Minuteman E28
12.06.2026 42 pages

User Manual E28/E30/E33 (7062.12/.15/.18) Technical setup manual for the Minuteman E28 Floor Machine. It provides technical information on performance details, wiring setup, application scenarios, replacement parts.

Tripla 65
COMAC Tripla 65
21.05.2026 3 pages

Tripla 65 On Completion of Work Having finished the job and before any type of maintenance is done, proceed as follows: 1. Close the cock (1) 2. Push the brushe Product operation manual for the COMAC Tripla 65 Scrubber. The guide offers support information and menu navigation, compatibility information, maintenance schedule.

KILO
RCm KILO
24.04.2026 47 pages

RCM S.p.A. via Tiraboschi, 4 - 41043 Casinalbo - Modena - Italy Tel. +39 059 515 311 - Fax +39 059 510 783 www.rcm.it - [email protected] 5/2015 Rev.00 INSTRUCTION Service and user manual for the RCm KILO Scrubber. It covers startup procedures, regulatory notices, menu navigation.