Terex Genie GS-2669DC Manuals

Operator's Manual Serial Number Range GS™-2669DC from GS6912-1300 AUS Australia GS™-3369DC GS™-4069DC with Maintenance Information First Edition Fifth Printing Part No. 215595GT Operator's Manual First Edition • Fifth Printing GS™-2669DC • GS™-3369DC • GS™-4069DC Part No. 215595GT Front Matter Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, contact us. Contact Us: Internet: www.genielift.com E-mail: [email protected] Contents Introduction ............................................................1 Symbol and Hazard Pictorials Definitions ..............3 General Safety .......................................................5 Personal Safety ......................................................8 Work Area Safety ...................................................9 Legend ................................................................ 16 Controls ............................................................... 17 Inspections .......................................................... 21 Operating Instructions ......................................... 36 Transport and Lifting Instructions ....................... 46 Maintenance ....................................................... 49 Specifications ...................................................... 51 Copyright © 2011 by Terex Corporation First Edition: Fifth Printing, March 2018 Genie is registered trademarks of Terex South Dakota, Inc. in the U.S.A. and many other countries. “GS” is a trademark of Terex South Dakota, Inc. These machines comply with AS 1418.10 First Edition • Fifth Printing Operator's Manual Introduction Part No. 215595GT GS™-2669DC • GS™-3369DC • GS™-4069DC 1 Intr oducti on Owners, Users and Operators: Thank you for choosing our machine for your application. Our number one priority is user safety, which is best achieved by our joint efforts. We feel that you make a major contribution to safety if you, as the equipment users and operators: 1 Comply with employer, job site and governmental rules. 2 Read, understand and follow the instructions in this and other manuals supplied with this machine. 3 Use good safe work practices in a commonsense way. 4 Only have trained/certified operators, directed by informed and knowledgeable supervision, running the machine. Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless:  You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations. Know and understand the safety rules before going on to the next section. 2 Always perform a pre-operation inspection. 3 Always perform function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended.  You read, understand and obey the manufacturer’s instructions and safety rules—safety and operator’s manuals and machine decals.  You read, understand and obey employer’s safety rules and worksite regulations.  You read, understand and obey all applicable governmental regulations.  You are properly trained to safely operate the machine. Operator's Manual First Edition • Fifth Printing Introduction 2 GS™-2669DC • GS™-3369DC • GS™-4069DC Part No. 215595GT Hazard Classification Decals on this machine use symbols, color coding, and signal words to identify the following: Safety alert symbol—used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Indicates a property damage message. Intended Use This machine is intended to be used only to lift personnel, along with their tools, and materials to an aerial work site. Safety Sign Maintenance Replace any missing or damaged safety signs. Keep operator safety in mind at all times. Use mild soap and water to clean safety signs. Do not use solvent-based cleaners because they may damage the safety sign material.

Operator's Manual Serial Number Range GS™-2669DC from GS69F-18000 CE GS™-3369DC GS™-4069DC with Maintenance Information Original Instructions Third Edition First Printing Part No. 1305655GT www.duma-rent.com Operator's Manual Third Edition • First Printing GS™-2669DC • GS™-3369DC • GS™-4069DC Part No. 1305655GT Front Matter Manufacturer: Terex South Dakota, Inc. 500 Oakwood Road Watertown, SD 57201, USA Authorized representative: Genie Industries B. V. Boekerman 5 4751 XK OUD GASTEL The Netherlands Contents Introduction ........................................................... 1 Symbol and Hazard Pictorials Definitions ............. 5 General Safety ...................................................... 8 Personal Safety ................................................... 11 Work Area Safety ................................................ 12 Legend ................................................................ 19 Controls ............................................................... 20 Inspections .......................................................... 24 Operating Instructions ......................................... 36 Transport and Lifting Instructions ....................... 45 Maintenance ....................................................... 48 Specifications ...................................................... 50 Copyright © 2011 by Trex Corporation Third Edition: First Printing, August 2020 Genie is a registered trademark of Terex South Dakota, Inc. in the U.S.A. and many other countries. “GS” is a trademark of Terex South Dakota, Inc. Complies with EC Directive 2006/42/EC See EC Declaration of Conformity www.duma-rent.com Third Edition • First Printing Operator's Manual Introduction Part No. 1305655GT GS™-2669DC • GS™-3369DC • GS™-4069DC 1 Introduction About this manual Genie appreciates your choice of our machine for your application. Our number one priority is user safety, which is best achieved by our joint efforts. This book is an operation and daily maintenance manual for the user or operator of a Genie machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, contact Genie. Product Identification The machine serial number is located on the serial label. Serial number stamped on chassis Serial label (located under cover) Intended Use and Familiarization Guide The intended use of this machine is to lift personnel, including tools, and materials to an aerial work site. Before operating the machine, it’s the operator’s responsibility to read and understand this familiarization guide.  Each person must be trained to operate a Mobile Elevating Work Platform (MEWP).  Familiarization with the MEWP must be given to each person who is authorized, competent and trained.  Only trained and authorized personnel should be permitted to operate the machine.  The operator is responsible to read, understand, and obey the manufacturer’s instructions and safety rules provided in the Operator’s Manual.  The Operator’s Manual is located in the manual storage container, at the platform.  For specific product applications, see Contacting The Manufacturer. www.duma-rent.com