Terex Genie GS84D-401 Manuals

Service and Repair Manual Serial Number Range GS™-3384 from GS84F-46000 from GS84D-401 This manual includes: Repair procedures Fault Codes Electrical and Hydraulic Schematics GS™-3390 from GS90F-56000 from GS90D-3201 GS™-4390 GS™-5390 For detailed maintenance procedures, refer to the appropriate Maintenance Manual for your machine. Part No. 1306587GT Rev A1 June 2021 Service and Repair Manual June 2021 Introduction ii GS™-84 • GS™-90 Part No. 1306587GT Introduction Introduction Important Read, understand and obey the safety rules and operating instructions in the appropriate Operator's Manual on your machine before attempting any procedure. This manual provides troubleshooting and repair procedures for qualified service professionals. Basic mechanical, hydraulic and electrical skills are required to perform most procedures. However, several procedures require specialized skills, tools, lifting equipment and a suitable workshop. In these instances, we strongly recommend that maintenance and repair be performed at an authorized Genie dealer service center. Compliance Machine Classification Group A/Type 2, 3 as defined by ISO 16368 Machine Design Life Unrestricted with proper operation, inspection and scheduled maintenance. Technical Publications Genie has endeavored to deliver the highest degree of accuracy possible. However, continuous improvement of our products is a Genie policy. Therefore, product specifications are subject to change without notice. Readers are encouraged to notify Genie of errors and send in suggestions for improvement. All communications will be carefully considered for future printings of this and all other manuals. Contact Us: Internet: www.genielift.com E-mail: [email protected] Find a Manual for this Model Go to http://www.genielift.com Use the links to locate Service Manuals, Maintenance Manuals, Service and Repair Manuals, Parts Manuals and Operator's Manuals. Copyright © 2016 by Terex Corporation 1306587GT Rev A, April 2021 Second Edition, First Printing Genie is a registered trademark of Terex South Dakota, Inc. in the U.S.A. and many other countries. “GS” is a trademark of Terex South Dakota, Inc. June 2021 Service and Repair Manual Introduction Part No. 1306587GT GS™-84 • GS™-90 iii Revision History Revision Date Section Procedure / Page / Description A 4/2021 Initial Release A1 6/2021 Repair 9-1 Reference Examples: Electronic Version Click on any content or procedure in the Table of Contents to view the update. Section – Repair Procedure, 4-2 Section – Fault Codes, All charts Section – Schematics, Legends and schematics