Terex Genie GTH4016 SR Manuals

Operator’s Manual Original Instructions Second Edition First Printing Part No. 57.0009.0607 Serial number range GTH-5021 R From serial n.: GTH5021R14B-101 Stage 3A Stage 3B GTH-4018 R From serial n.: GTH4018R15M-101 GTH-4016 R From serial n.: GTH4016R15M-101 Stage 3A Stage 3B Stage 3A Stage 3B Copyright © 2015 by Terex Corporation Second Edition: First Printing, May 2015 Genie is a registered trademark of Terex South Dakota, Inc. in the U.S.A. and many other countries. “GTH” is a trademark of Terex South Dakota, Inc. May 2015 GTH-4016 R - 4018 R - 5021 R Part No. 57.0009.0607 Second Edition - First Printing TEREX Global GmbH Bleicheplatz 2 8200 Schaffhausen Switzerland Technical Assistance Service Telephone: +39 075 9418129 +39 075 9418175 e-mail: [email protected] Contents Introduction .......................................................... 1 Symbol and Hazard Pictorials Definitions............ 5 General Safety..................................................... 7 Work Area Safety ............................................... 15 Safety Precautions ............................................ 23 Legend............................................................... 26 Controls ............................................................. 28 Inspections ........................................................ 36 Operating Instructions ....................................... 54 Parking and Storage .......................................... 74 Transport and Lifting Instructions ...................... 76 Maintenance ...................................................... 81 Attachments....................................................... 91 Specifications .................................................. 100 Load Charts .....................................................103 Test..................................................................148 EC Declaration of Conformity .......................... 149 May 2015 Second Edition - First Printing Part No. 57.0009.0607 GTH-4016 R - 4018 R - 5021 R 1 Introduction About This Manual Genie appreciates your choice of our machine for your application. Our number one priority is user safety, which is best achieved by our joint efforts. This book is an operation and daily maintenance manual for the user or operator of a Genie machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, contact Genie. For Options Manuals (if equipped): • Key Pad Unlocking Device (Option part number 58.2513.1089) • Radio Remote Control (Option part number 58.2513.1038) • Radio Mp3 (Option part number 58.2513.1093) PLS visit our webpage at www.genielift.com/en/service-support/manuals Product Identification The machine serial number is located on the serial label. Intended Use A slewing variable reach rough terrain forklift truck is defined as a wheeled type truck with a slewing upper structure which can rotate more than 5° left/ right, a pivoting boom, which may be equipped with various attachments for picking, transporting and placing loads with the established load range charts. In standard configuration the machine rotates 200° left and 200° right; the 360° continuous rotation is optional. Use of this product in any other way is prohibited and contrary to its intended use. Serial number stamp Serial label Homologation label (if required) GTH 4016 R - GTH 4018 R Serial number stamp Serial label Homologation label (if required) GTH 5021 R

Operator's Manual Radio Remote Control GTH4016 SR GTH4018 SR GTH5021 R Serial number range Original Instructions First Edition Second Printing Part. No. 57.0303.5116 With Maintenance Information From serial n.: 17857 From serial n.: 17888 From serial n.: GTH 5021R14B-101 Operator's Manual 2 RADIO REMOTE CONTROL Cod. 57.0303.5116 First Edition - Second Printing Contents Introduction ...........................................Pag. 3 Symbols Used On The Remote Control Pag. 5 Safety Precaution .................................Pag. 7 Radio Remote Control Description .......Pag. 15 Inspections ...........................................Pag. 17 Operating Instructions ..........................Pag. 21 Maintenance .........................................Pag. 27 Copyright © 2014 by Terex Corporation First Edition: Second Printing, December 2014 Genie is a registered trademark of Terex South Dakota, Inc. in the U.S.A. and many other countries. “GTH” is a trademark of Terex South Dakota, Inc. TEREX Global GmbH Bleicheplatz 2 8200 Schaffhausen Switzerland Technical Assistance Service Telephone: +39 075 9418129 +39 075 9418175 e-mail: [email protected] First Edition - Second Printing Operator's Manual Cod. 57.0303.5116 RADIO REMOTE CONTROL 3 Introduction Symbols Safety alert symbol: used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death DANGER Red: indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNINGOrange: indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Yellow : indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE Blue: indicates a hazardous situation which, if not avoided, could result in property damage. PROTECT THE ENVIRONMENTGreen: used to draw the attention to important information on environment protection. INTRODUCTION This document is a quick guide for using the radio remote control in conjunction with the TEREX GLOBAL GmbH telehandlers. The operators must read all the manuals supplied since these instructions are an integral part of the original manual provided by the radio remote control manufacturer. RADIO FREQUENCIES The radio frequencies programmed in the radio remote control are among those admitted by the European regulations in force when the control is put on the market. NOTICE It should be remembered that in some countries the use and possession of a radio remote control is regulated by specific rules. There may also be some national limitations for the use of the frequencies. Before using the radio remote control, verify if its operating frequency band is permitted by the national radiocommunication laws. The radio remote control dealt with in this manual uses frequencies of 434 MHz. Operator's Manual 4 RADIO REMOTE CONTROL Cod. 57.0303.5116 First Edition - Second Printing Intentionally blank page