Terex Genie Z-60/37DC Manuals

Operator's Manual Serial Number Range Z-60/37DC from Z6016N-101 CE Z-60/37FE with Maintenance Information Original Instructions First Edition Second Printing Part No. 1270491 Operator's Manual First Edition • Second Printing Z-60/37DC • Z-60/37FE Part No. 1270491 Front Matter Contents Introduction ........................................................... 1 Symbol and Hazard Pictorials Definitions ............. 5 General Safety ...................................................... 7 Personal Safety ................................................... 11 Work Area Safety ................................................ 12 Legend ................................................................ 21 Controls ............................................................... 22 Inspections .......................................................... 29 Operating Instructions ......................................... 44 Transport and Lifting Instructions ....................... 55 Maintenance ....................................................... 58 Specifications ...................................................... 62 Copyright © 2016 Terex Corporation First Edition: Second Printing, December 2016 Genie and "Z" are registered trademarks of Terex South Dakota, Inc. in the U.S.A. and many other countries. Complies with EC Directive 2006/42/EC See EC Declaration of Conformity First Edition • Second Printing Operator's Manual Introduction Part No. 1270491 Z-60/37DC • Z-60/37FE 1 Introduction About this manual Genie appreciates your choice of our machine for your application. Our number one priority is user safety, which is best achieved by our joint efforts. This book is an operation and daily maintenance manual for the user or operator of a Genie machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, contact Genie. Product Identification The machine serial number is located on the serial label. Serial number stamped on chassis Serial label (located under cover) Intended Use This machine is intended to be used only to lift personnel, along with their tools and materials to an aerial work site. Bulletin Distribution and Compliance Safety of product users is of paramount importance to Genie. Various bulletins are used by Genie to communicate important safety and product information to dealers and machine owners. The information contained in the bulletins is tied to specific machines using the machine model and serial number. Distribution of bulletins is based on the most current owner on record along with their associated dealer, so it is important to register your machine and keep your contact information up to date. To ensure safety of personnel and the reliable continued operation of your machine, be sure to comply with the action indicated in a respective bulletin. Operator's Manual First Edition • Second Printing Introduction 2 Z-60/37DC • Z-60/37FE Part No. 1270491 Contacting the Manufacturer At times it may be necessary to contact Genie. When you do, be ready to supply the model number and serial number of your machine, along with your name and contact information. At minimum, Genie should be contacted for: Accident reporting Questions regarding product applications and safety Standards and regulatory compliance information Current owner updates, such as changes in machine ownership or changes in your contact information. See Transfer of Ownership, below. Transfer of Machine Ownership Taking a few minutes to update owner information will ensure that you receive important safety, maintenance and operating information that applies to your machine. Please register your machine by visiting us on the web at www.genielift.com or by calling us toll free at 1-800-536-1800.