TEUCER WP-4RGBWN Manuals

4 Zone DMX and RF wall panel for RGB and RGBW LED strip www.teucerled.co.uk V002-11-2019 The WP-4RGBWN wall panel enables control of 1 to 4 zones of RGB/RGBW LED strip, featuring a simple to use back lit touch control slider for easy colour adjustment . Product Description Technical Specification Controller Order Code WP-4RGBWN Type RF and DMX wall panel Input Voltage AC85-265V Operation Frequency 2.4GHz Dimension 86x86x36.5mm (WxLxH) • Easy control of RGB/RGBW LED strips for up to 4 zones independently or simultaneously • Touch sensitive glass • 5%-100% smooth dimming • Backlit buttons for night time use • Designed to fit into your existing switch back box • DMX512 signal output for wired control of RGB/ RGBW DMX decoders • Receiver Auto-Transmitting function to achieve greater distances between receivers and the remote • Built-in dynamic play modes with receiver auto- synchronization Features Order code R3C R4C DIM-DMX1CH(N) Channels 3 (RGB) 4 (RGBW) 4 (RGBW) Type RF receiver RF receiver DMX decoder Input Voltage 12-24V DC 12-36V DC 12-24V DC Current 3x4A 4x5A 4x5A Output 3X(48-96W) 4X(60-180W) 4x(60-120)W Note Constant voltage Constant voltage Constant voltage Dimension 33x97x18mm (WxLxH) 45x175x27mm (WxLxH) 50x170x23mm (WxLxH) R3C R4C DIM-DMX1CH(N) Compatible RGB receivers and DMX decoders Technical Specification WP-4RGBWN 4 Zone DMX and RF wall panel for RGB and RGBW LED strip www.teucerled.co.uk V002-11-2019 Controller layout ZONE ZONE ZONE ZONE BRT/SPEED WHITE POWER MODE ON/OFF Brightness / speed Zones Play mode RGB colour slide White BACK FRONT AC INPUT L AC INPUT N WP-4RGBWN DMX OUTPUT D+ DMX OUTPUT D- DMX OUTPUT GND L N GND D+ D- DMX OUTPUT INPUT 85-265VAC 86mm 86mm 45.5mm 59mm 35mm 62mm 11.5mm Compatible Back box types: European style 86 size Back box mounting Wall panel Bracket Back box Bracket removal 4 Zone DMX and RF wall panel for RGB and RGBW LED strip www.teucerled.co.uk V002-11-2019 RGB Receiver wiring diagram RGBW Receiver wiring diagram R3C RGB LED strip Power supply + R4C RGBW LED strip Power supply + R G B W 4 Zone DMX and RF wall panel for RGB and RGBW LED strip www.teucerled.co.uk V002-11-2019 L N Power input AC85-265V Ppwer Supply 5-24VDC L N AC110-230V Uin=12-36VDC Iin=20.5A Uout=4×(12-36)VDC Iout=4×5A Pout=4×(60-180)W Temp Range: -30℃~+55℃ DMX512 & RDM Decoder DMX IN/OUT D+ D- D+ D- Ppwer Supply 5-24VDC L N AC110-230V Uin=12-36VDC Iin=20.5A Uout=4×(12-36)VDC Iout=4×5A Pout=4×(60-180)W Temp Range: -30℃~+55℃ DMX512 & RDM Decoder DMX IN/OUT D+ D- D+ D- DMX Signal DMX Signal L N INPUT 85-265VAC GND D+ D- DMX OUTPUT WP-4RGBWN W W RGBW LED strip RGBW LED strip DIM-DMX1CH(N) DIM-DMX1CH(N) DMX Decoder wiring diagram (RGBW) Synchronising the remote to receiver Match button LED Indicator R3C Match button LED indicator Push-Dim GND R4C 1) Ensure the receiver has power. Press the match button on the receiver. LED Indicator will start flashing slowly.

The WP-4RGBW wall panel enables control of 1 to 4 zones of RGBW LED strip. Featuring a simple to use back lit touch control slider for easy colour adjustment . Product Image Product Description Technical Specification Brighter for longer CONTROLLER AND RECEIVER www.teucerled.co.uk Controller Order Code WP-4RGBWN Type RF and DMX wall panel Input Voltage AC85-265V Operation Frequency 2.4GHz Dimension 86x86x36.5mm (WxLxH) • Enables control via DMX (DMX decoder required for DMX) or wirelessly via RF • Supports single zone independent control or multiple zone synchronous control. • Ultra-sensitive backlit high strength glass touch panel. • Smooth and accurate colour adjustment via a touch colour slider. • Independent brightness adjustment of each RGBW channel to achievea vast pallet of colours. • Built in 30 optional change modes with adjustable speed and brightness. Features RF technology allows for greater flexibility when it comes to controlling simple or complex lighting installations without the need of additional cabling. There are some limitations where installations have the receivers enclosed in electrical boxes or hidden away in a ceiling , reducing the RF signal strength and therefore the communication range. In order to overcome these RF Signal restrictions we sug- gest the following when synchronising our RF controllers and receivers: • Keep the distance within 10 meters from the control- ler to the receiver. The remote can operate up to 30 meters if signal is uninterrupted by obstacles. • When expanding your lighting, always try and use a signal repeater (PR-RGB), where possible. • If your installation requires several RF receivers, ensure the “master” receiver is positioned in the middle. Recommendation Receiver Order Code R4C Type RF receiver Input Voltage 12-36VDC Current 4x5A Output 4x(60-180)W Note Constant voltage Dimension 45x175x27mm (WxLxH) WP-4RGBWN and R4C 4 zones RF controller with R4C receiver for RGBW LED strip Receiver wiring diagram Controller layout Brighter for longer CONTROLLER AND RECEIVER www.teucerled.co.uk ON/OFF Brightness / speed Zones / Scenes Play mode RGB colour slide White R4C RGBW LED strip Power supply + R G B W WP-4RGBWN and R4C 4 zones RF controller with R4C receiver for RGBW LED strip Dip switch settings 1 2 3 ON OFF ON RGBW Dipswitch setting for 4 Scenes Dipswitch no 1: UP (ON) Dipswitch no 2: DOWN (OFF) Dipswitch no 3: RF - UP (ON) Caution: before power ON, you must confirm the dip switch selection. RGBW Dipswitch setting for 4 Zones Dipswitch no 1: UP (ON) Dipswitch no 2: UP (ON) Dipswitch no 3: RF - UP(ON) 1 2 3 ON ON ON Synchronising the remote to receiver Brighter for longer CONTROLLER AND RECEIVER www.teucerled.co.uk Press the zone you wish to allocate Troubleshoot Problem Cause Corrective No light • No power. • Wrong connection or unsecure connec- tion. • Check the power. • Check the connection. Wrong Colour • Wrong connection of RGB/W wires. • Retrace and reconnect RG- B/W wires. Uneven intensity be- tween front and rear of the strip, with voltage drop • Output cable is too long. • Cable diameter is too small. • Overload beyond driver capability. • Overload beyond receiver capability. • Reduce cable or loop sup- ply. • Change to a thicker cable. • Replace with a suitable higher power driver. • Add a power repeater. No response from the remote • The wall panel has no power. • Beyond controllable distance. • The controller isn’t synchronised with the remote. • Check the incoming supply to the wall panel • Reduce remote to receiver distance. • Re-sync the remote. 1) Ensure the receiver has power. Press the match button on the receiver. Indicator will start flashing. 4) To restore to factory default settings and delete the allocated controller, press and hold the match button longer than 5 seconds. 2) Choose the zone on the remote to allocate the receiver within 5 seconds after pressing the match button. The indicator will stop flashing, and the controller will be synchronised. Match bu�on R4C 3) Repeat the process with allocating zones for all receivers. WP-4RGBWN and R4C 4 zones RF controller with R4C receiver for RGBW LED strip

The WP-4RGBWN wall panel enables control of 1 to 4 zones of RGB/W LED strip. Featuring a simple to use back lit touch control slider for easy colour adjustment . Product Image Product Description Technical Specification Brighter for longer CONTROLLER AND DMX DECODER www.teucerled.co.uk Controller Order Code WP-4RGBWN Type RF and DMX wall panel Input Voltage AC85-265V Operation Frequency 2.4GHz Dimension 86x86x36.5mm (WxLxH) Receiver Order Code DIM-DMX1CH(N) Type DMX decoder Input Voltage 12-24VDC Current 4x5A Output 4x(60-120)W Note Constant voltage Dimension 50x170x23mm (WxLxH) • Enables control via DMX (when used with DIM-DMX- 1CH(N) ) or wirelessly via RF with a Teucer RF receiver. • Supports single zone independent control or multiple zone synchronous control. • Ultra-sensitive backlit high strength glass touch panel. • Smooth and accurate colour adjustment via a touch col- our slider. • Independent brightness adjustment of each RGB chan- nel to achieve vast pallet of colours. • Built in 30 optional change modes with adjustable speed and brightness. Features Recommendation WP-4RGBWN and DIM-DMX1CH(N) 4 zones RF controller with DMX decoder for RGB/W LED strip DMX is a standard protocol for digital communication which allows control of DMX devices / lighting from a compatible DMX controller. We recommend using the WP-4RGBWN controller when controlling all lighting as a single zone. Please note that with the DIMDMX1CH(N) one can use the manual button to switch ON the connected LED strips and check the operation by cycling through the various modes. • When expanding your lighting always try and use a sig- nal repeater (PR-RGB) where possible. • If using DMX over 55mtrs it is recommended to use a DIM-DMXAMP (amplifier) for longer distances. • Can be used with DMX control systems Decoder wiring diagram Controller layout L N Power input AC85-265V WP-RGBWN W Ppwer Supply 5-24VDC L N AC110-230V Uin=12-36VDC Iin=20.5A Uout=4×(12-36)VDC Iout=4×5A Pout=4×(60-180)W Temp Range: -30℃~+55℃ DMX512 & RDM Decoder DMX IN/OUT D+ D- D+ D- DIM-DMX1CH(N) Ppwer Supply 5-24VDC L N AC110-230V W Uin=12-36VDC Iin=20.5A Uout=4×(12-36)VDC Iout=4×5A Pout=4×(60-180)W Temp Range: -30℃~+55℃ DMX512 & RDM Decoder DMX IN/OUT D+ D- D+ D- DIM-DMX1CH(N) DMX Signal DMX Signal ON/OFF Brightness / speed Zones / Scenes Play mode RGB colour slide White Brighter for longer CONTROLLER AND DMX DECODER www.teucerled.co.uk WP-4RGBWN and DIM-DMX1CH(N) 4 zones RF controller with DMX decoder for RGB/W LED strip When wiring the decoders, it is important to make sure the total wattage of the LED strips does not exceed the maximum rated wattage per channel of the decoder. Each chanel is rated at 5A, so the maximum wattage per channel is 24x5A=120w. The power supply has to match the rated voltage and be superior to the total LED strip wattage by a remcommended 10%. Brighter for longer CONTROLLER AND DMX DECODER www.teucerled.co.uk Troubleshoot Problem Cause Corrective No light • No power. • Wrong connection or unsecure connection. • Check the power. • Check the connection. Wrong Colour • Wrong connection of RGB/W wires. • Retrace and reconnect RG- B/W wires. Uneven intensity between front and rear of the strip, with voltage drop • Output cable is too long. • Cable diameter is too small. • Overload beyond driver capability. • Overload beyond receiver capability. • Reduce cable or loop supply. • Change to a thicker cable. • Replace with a suitable higher power driver. • Add a power repeater. WP-4RGBWN and DIM-DMX1CH(N) 4 zones RF controller with DMX decoder for RGB/W LED strip Example Address Setting Addresses for the RGB / RGBW mode when using a single decoder: MODE Starting Address/ 1st Channel 2nd Channel 3rd Channel 4th Channel RGB/RGBW Zone 1 001 002 003 004 RGB/RGBW Zone 2 005 006 007 008 RGB/RGBW Zone 3 009 010 011 012 RGB/RGBW Zone 4 013 014 015 016 Each RGB/RGBW Zone will use 4 channels. R G B W DECODER NUMBER 001 002 003 004 DECODER 1 005 006 007 008 DECODER 2 009 010 011 012 DECODER 3 013 014 015 016 DECODER 4 Addresses for the RGB / RGBW mode when using multiple decoders Teucer (UK) Ltd Head office Bedford House, Fulham Green, Fulham High Street, London, SW6 3JW, UK Tel: +44 (0)20 7350 4429 Fax: +44(0)20 7228 4647 www.teucerled.co.uk [email protected] Logistics Centre Trident Court, 1 Oakcroft Road, Chessington, Surrey, KT9 1BD, London, UK Tel: +44(0)20 7350 4429, extension: 401 [email protected] Controlling your LED strip Warranty • Products must be installed and serviced by qualified electrician. • Please ensure the receiver is mounted in a water proof enclosure if installed in an outdoor environment, avoiding metallic enclosures. • Always ensure products are mounted in areas with adequate ventilation to avoid overheating. • Please ensure outputs of any power suppliers used in conjuction with this product comply with its working voltage. • Never install product whilst connected to power and double check connections before switching on to avoid short circuits. Safety Should this product fail during the 3 year warranty period it will be replaced free of charge, subject to the correct installation of the original product in accordance with applicable and appropriate electrical codes and instructions provided by Teucer, as well as subsequent return of the faulty unit. Teucer does not accept responsibility for any installation costs associated with the replacement of this product and Teucer reserves the right to alter specifications without prior notice. Teucer can offer 5 year warranty upon request. For further information, please see our Terms and Conditions. www.teucerled.co.uk/terms-and-conditions/ • To adjust the colour, touch the RGB colour slider. • To change the brightness, press the brightness button. • On/Off: For single zone: Turn ON/OFF strips. • For 4 Zone: Short press turn ON/OFF current zone light, long press 2s turn OFF all zones strips. • Mode: Short press to run next mode, long press 2s runs mode-cycle. • W: Short press to turn ON/OFF W channel, • Long press 1-5s for continuous 256 levels adjust- ment of the white channel brightness. • Zone: Choose the zone you wish to control. • Zone / Scene: When used as 4 scene: Short press- to run the scene, long press 2s to save. ON/OFF Brightness / speed Zones / Scenes Play mode RGB colour slide White • There are 30 dynamic modes, press the play mode button to browse thorugh modes. To choose the mode, press and hold play mode for 2seconds. • There are 10 speeds for the play modes. Press the speed button to browse through the speed levels. • Press and hold the speed button to go to the highest speed level. • To save your favourite setup, press and hold scene buttons. • To recall saved setup, press scene button. • You can save up to 4 scenes. Brighter for longer CONTROLLER AND DMX DECODER www.teucerled.co.uk WP-4RGBWN and DIM-DMX1CH(N) 4 zones RF controller with DMX decoder for RGB/W LED strip