Theben TR 610 top3 Manuals

1 TR 610 top3 6100130 TR 612 top3 6120130 307253 Time switch EN 1. Basic safety information Danger of death through electric shock or fire! ¾ ¾ Installation should only be carried out by a qualified electrician! WARNING •The device is designed for installation on DIN top hat rails (in accordance with EN 60715) •The device corresponds to type 1 STU in accordance with IEC/EN 60730-2-7 •Power reserve (10 years) is reduced if memory card is inserted (using battery power) 2. Proper use •The time switch is used for lighting, ventilation and flushing applications etc. •Only for use in closed, dry rooms ! Do not use on safety devices, e.g. escape route doors, fire safety equipment etc. Disposal ¾ � Dispose of device in environmentally sound manner 3. Installation and connection Mounting the time switch Danger of death through electric shock or fire! ¾ ¾ Installation should only be carried out by a qualified electrician! WARNING clic Test tap 45° cable Plug-in screwless terminal NC contact Bluetooth OBELISK top3 (9070130) DuoFix plug-in terminal ! Check the depth of the control cabinet when OBELISK top3 is connected. The depth must be > 94 mm. ¾ � Mount on DIN top hat rails (as defined in EN 60715) ¾ � Switched voltage-free ¾ � Ensure device cannot be switched on ¾ � Check absence of voltage ¾ � Earth and bypass ¾ � Cover or shield any adjacent live components Connecting the cable Wiring diagrams 6100130 / 6120130 C1 1 2 3 L N N L L C2 C1 1 2 3 4 5 6 L N L L N ¾ � Strip cable to 8 mm (max. 9) ¾ � Insert cable in the open DuoFix plug-in terminal at 45° L2 cables per terminal position possible ¾ � To open the DuoFix plug-in terminal, press screwdriver downwards Disconnecting the cable ¾ � Use the screwdriver to push the load line connection opener downwards 2 4. Device description Display & buttons   0 6 12 18 24 MENU OK � � OK MENU Programmed switching times Date display Channel status C1, C2 On Off Time display Days of the week from 1 to 7 Display of the active buttons with the relevant function – Activate display – Open menu – Cancel menu – ESC (leave menu) – Save selection – Confirm selection ¾ � � Options are displayed Operating instructions YES Confirmation Press OK NO Modify/ Change Press t u 1. Read text line text/symbol represents query 2. Make a decision Overview of navigation menu PROGRAM TIME/DATE MANUAL OPTIONS END TIME SET DATE SU--WI WEEK DAY FORM DATE FORM TIME END CHANNEL C1 CHANNEL C1 OPERATING HOUR LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTINGS INFO END MENU PERM ON PERM OFF OVERR ON HOLIDAY END u u u u u NEW CHECK MODIFY DELETE END Initial operation FORM DATE DEUTSCH ENGLISH ESPANOL FRANCAIS YEAR MONTH DAY FORM TIME HOUR MINUTE SU-WI EUROPE  ... u 28 02 16 C1 off C2 off 9:4046 ¾ � Set language, date, time as well as summer/winter time (SU-WI) ¾ � Press any button and display follows on screen (see fi gure) 3 5. Settings and functions Set switching time CHANNEL C1 same switching time for several days = block Switching time for one day   PROGRAM MENU NEW CHECK MODIFY DELETE END MEM FREE 56 ON HOUR MINUTE MONDAY SAVE COPY ADD TUESDAY u u SAVE u u LA switching time always consists of a start time and an end time LThere are 56 memory cells available Example: Switch on sports hall lighting from Mon–Fri, 7:30 to 12:00 hrs ¾ � Press MENU ¾ � Select PROGRAM and press OK to confirm ¾ � Select CHANNEL C1 or C2, confirm with OK ¾ � Select NEW and press OK to confirm ¾ � Select ON (for turn-on time) or OFF (for turn-off time), confirm with OK ¾ � Set required turn-on time (Mo–Fr, 7:30), confirm with OK ¾ � Select COPY, confirm with OK ¾ � ADD TUESDAY is displayed, confirm by pressing OK and also confirm the days We, Th, Fr by pressing OK. ¾ � Continue with u until SAVE is displayed. ¾ � Confirm by pressing OK. Repeat all steps for the turn-off time, however instead of selecting ON with u select OFF and enter 12:00 for hour and minute. Change switching times MENU PROGRAM CHANNEL C1 u MONDAY MODIFY HOUR MODIFY MINUTE MODIFY SINGLE DAY MODIFY BLOCK NEW CHECK MODIFY DELETE u u LYou can either change or delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time Change individual switching times ¾ � Press MENU ¾ � Select PROGRAM and press OK to confirm ¾ � Select CHANNEL C1 or C2, confirm with OK ¾ � Select MODIFY, confirm by pressing OK ¾ � Select day, confirm with OK ¾ � MODIFY HOUR, use the + or – buttons to change hour and minute and confirm with OK. ¾ � To change several switching times, select MODIFY BLOCK, confirm with OK Delete switching program DELETE ALL SINGLE MENU PROGRAM u u CHANNEL C1 MONDAY DELETE SINGLE DAY DELETE BLOCK NEW CHECK MODIFY DELETE u u LYou can either delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time ¾ � Press MENU ¾ � Select PROGRAM and confirm with OK ¾ � Select CHANNEL C1 or C2, confirm with OK ¾ � Select DELETE, confirm with OK ¾ � INDIVIDUAL is displayed (with u DELETE ALL), confirm with OK ¾ � MONDAY is displayed, confirm with OK ¾ � Select DELETE BLOCK, confirm with OK ¾ � With u DELETE MONDAY etc. individual days can also be cleared. 4 Setting holiday function MANUAL CHANNEL C1 MENU PERM ON PERM OFF OVERR ON HOLIDAY END ON BEGIN HOLIDAY END HOLIDAY u  ...  ... ¾ � Press MENU ¾ � Select MANUAL and press OK to confirm ¾ � Select CHANNEL C1 or C2, confirm with OK ¾ � Select HOLIDAY and press OK to confirm ¾ � Select ON and press OK to confirm ¾ � Select START HOLIDAY and press OK to confirm ¾ � Enter YEAR, MONTH, DAY, HOUR and press OK to confirm ¾ � Select END HOLIDAY and press OK to confirm ¾ � Enter YEAR, MONTH, DAY, HOUR and press OK to confirm Activating PIN code The PIN code is set in OPTIONS via the menu. LIf you have forgotten your PIN, call the Theben Hotline. LHave the serial number ready. OPTIONS NO PIN WITH PIN CURRENT PIN NEW PIN 00 00 OPERATING HOURS LCD ILLU- MINATION LANGUAGE PIN FACTORY SETTINGS INFO END u u MENU Setting manual or permanent switching Manual or permanent switching can be set via the menu in MANUAL or (in the automatic screen) by button combination (see picture). •Manual control: Reversing the channel status to the next automatic or programmed switching. •Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times are ineffective ok Channel C1 Channel C2 Activating manual control ¾ � Briefly press both buttons simultaneously Activating permanent switching ¾ � Press both buttons simultaneously for 2 seconds Cancelling manual/permanent switching ¾ � Press both buttons simultaneously Hour counter The operating hours of the channel (relay) are displayed and deleted in the OPTIONS menu. If the number of operating hours exceeds the value set in the Service menu, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h. ¾ � Delete operating hours or set a higher value in Service (e.g. to 10,000 h) Using Bluetooth OBELISK top3 All functions can also be transferred to the time switch using the Bluetooth OBELISK top3 memory card (9070130). Copying OBELISK → TIME SWITCH This copies the switching program and optionally all time switch settings (e.g. external input, time format etc.) from the memory card in the time switch. Copying TIME SWITCH → OBELISK This copies all switch programmes and settings from the time switch to the memory card. Starting OBELISK program Takes on the switching times that are programmed on the memory card. As soon as the memory card is removed, the switching times of the time switch are re-activated.