Thule Atmos X5 Manuals

9 Snap bottom hinges on until you hear an audible “click”. 8 Slide thumbs down faceplate, purging air from inside case and establishing flush contact between protective film and phone screen. 6 Snap bottom corner of the faceplate onto the main case body until you hear an audible “click”. Repeat on other corner. INSTRUCTIONS 2 Inspect underside of faceplate and remove any debris. 1 Thoroughly clean your phone screen with microfiber cloth, removing all dust and fingerprints. INSTALLATION 3 Slide phone into case bottom end first, maintaining alignment of foam pad. 4 Use thumbs to snap opposite side of phone into case. Thule.com/ThuleAtmosX5installation OPTIONAL 5 Find 3 notches along underside of faceplate. Align notches along top edge of case. Press down to engage notches with case. 10 Ensure all edges are flush. Thread the lanyard through holes on botton right corner. Loop back through and pull tight. 7 Snap side hinge on until you hear an audible “click”. Repeat on other side. 1 2 3 1