T.J.M. T15 Manuals

FITTING INSTRUCTIONS Product: T15 Signature Frontal Protection System Vehicle: Toyota HiLux (MY2020) Part No. 070AP15N87J For product warranty please refer to our website www.tjm.com.au F-31649 Page 1 of 18 15/03/2021 Australian Standards Relating to Installing Vehicle Frontal Protection Systems (VFPS): AS 4876.1-2002 a) Do not attach V.F.P.S. to vehicle using anchorages not intended for this purpose (e.g. engine mounting bolts), other than those specified by the V.F.P.S. manufacturer in this instruction. b) Do not use this product for any vehicle make or model other than those specified by the V.F.P.S. manufacturer (as above). c) Do not remove any plaques or labels from the V.F.P.S. d) Do not modify the structure of the V.F.P.S. in any way. • Read instructions fully before commencing fitment. • Left hand & Right hand components are determined as seated in the vehicle. • Check for (and remove) any build up in all captive nuts fitted to the FPS. • Be aware that a number of government / fleet departments require that the tow points be painted red. • Ensure that the “Rated Recovery Point Label” is affixed alongside the compliance label, in the driver’s side doorjamb. Bolt tensions Dia. (mm) Nm ft.lbs Dia. (inch) Nm ft.lbs All bolt tensions are as follows unless otherwise specified. 5 5 4 1/4” 9 7 6 9 7 5/16” 22 15 8 22 16 3/8” 33 27 10 44 32 7/16” 55 43 12 77 57 1/2” 86 66

FITTING INSTRUCTIONS Product: T15 Fleet & Deluxe Frontal Protection System Vehicle: Mazda BT50 Part No. 070SB15F46E 070AP15N46E 070AB15N46E For product warranty please refer to our website www.tjm.com.au File: F-1833.docx Page 1 of 19 28/10/2021 Australian Standards Relating to Installing Vehicle Frontal Protection Systems (VFPS): AS 4876.1-2002 a) Do not attach V.F.P.S. to vehicle using anchorages not intended for this purpose (e.g. engine mounting bolts), other than those specified by the V.F.P.S. manufacturer in this instruction. b) Do not use this product for any vehicle make or model other than those specified by the V.F.P.S. manufacturer (as above). c) Do not remove any plaques or labels from the V.F.P.S. d) Do not modify the structure of the V.F.P.S. in any way. • Read instructions fully before commencing fitment. • Left hand and Right hand components are determined as seated in the vehicle. • Check for (and remove) any build up in all captive nuts fitted to the FPS. • Be aware that a number of government / fleet departments require that the tow points be painted red. • Ensure that the “Rated Recovery Label” is affixed alongside the compliance label, in the driver’s side doorjam. Bolt tensions Dia. (mm) Nm ft.lbs Dia. (inch) Nm ft.lbs All bolt tensions are as follows unless otherwise specified. 5 5 4 1/4” 9 7 6 9 7 5/16” 22 15 8 22 16 3/8” 33 27 10 44 32 7/16” 55 43 12 77 57 1/2” 86 66