TKB Home E91.713 Manuals

E91.713 E91.723 E91.716 3A 3A 16A 6PRG:Set day off mode Press + or - to choose day off 5/2 day mode,6/1day mode,7 day mode Re-press manu key to enter to next step. Modify Modify Temp. Temp. 1 2 3 4 5 6 1 2 20℃ 15℃ 15℃ 15℃ 22℃ 15℃ 22℃ 15℃ 06：00 08：00 11：30 12：30 17：00 22：00 08：00 23：00 DS/MRD-06-091124 Weekly circulation digital programming thermostat with LCD touch screen,which has 6-event everyday. Manual mode and programme mode could be selec- ted.The thermostat is recommended for control of electric heating devices or on/off valve actuator used in hydronic floor heating. E91...Touch Screen Programming Thermostat Selection Table: Model Current Application Built-in&floor sensor,floor limit sensor weekly programme Built-in&floor sensor,floor limit sensor weekly programme Built-in&floor sensor,floor limit sensor weekly programme,a potential-free output Parameter: Voltage:220V/230V Power comsuption:2W Setting range:5～90℃(can adjust to 35-90?) Ambient temperature:-5～50℃ Protective houseing:IP20 Housing material: anti-flammable PC Limitation setting:5...60? (Factory setting:35?) User operation: Function: Manual mode Manual mode Clock-controlled programme mode Clock-controlled programme mode Heating on Heating on Wake-up,event 1 Wake-up,event 1 Leave(am),event 2 Leave(am),event 2 Return(am),event 3 Return(am),event 3 Leave(pm),event 4 Leave(pm),event 4 Return(pm),event 5 Return(pm),event 5 Sleep,event 6 Sleep,event 6 Programming: Press Manu key for 5 seconds to start programming Press Manu key for 5 seconds to start programming Key Event Symbol Time Event Time 1-5 6-7 Note: 1) The pre-programmed setpoint(15℃) for event 3&4 is the same as event 2,please reset it according to your individual requirement. 2)Symbol“OFF”will be displayed if the setpoint reaches the minimum set value and the thermostat is switch off in this event. Usually finished at mounting thermostat. Press key simultaneously press power on key when in power off. 1ADJ:Temperature calibration Press� or �key to adjust present checked value,adjustable scale:9.9℃. Re-press manu key to enter to next step. 2SEN:Sensor mode Press�or�key to choose senor working mode IN:built-in,OUT:floor sensor, ALL:both sensors,floor sensor is the limit sensor Re-press manu key to enter to next step. 3LIT: Modify limition value Press�or�key to modify the temp. Limit valuelimition range:5~60� Re-press manu key to enter to next step. 4DIF:Switch differential setting Press�or�key to change switch defferential Setting range:0.5~10�. Re-press manu key to enter to next step. 5LTP:Start anti-frozen function in power off Press�or�key to change the present anti- frozen function Re-press manu key to enter to next step. 7RLE:Potential-free output and main power output in same/different way. Press�or�key to change the present linkage state. 00:in same way,01:in defferent way? Re-press manu key to enter to next step. 8DLY:Delay time of potential-free output Press�or�key to change linkage delay time Range:0-5min. Re-press manu key to enter to next step. 9HIT:Max. Temperature setting Press�or� key to change the Max.value Range:35-90? Re-press manu key to enter to next step. AFAC:Reset to factory setting Press�key for 5seconds till showing --- Reset to factory setting Swithch off for saving setting INSTRUCTIONS Switch differential:0.5-10? adjustable factory setting1? Day Day Advanced setting(qualified person preferred): 1） 2）At clock-controlled programme mode,press“ ”or“ ” enter to temporary control. 3）UP“ ”,DOWN“ ”to adjust the temperature value. 4）press clock “ ”key for 5 seconds,then enter to clock set, choose modified item by pressing clock“ ”,press UP/DOWN“ ”to modify the date and clock,then switch off to quit. 5）press manu“ ”to choose manual mode or programme mode. 6）set temperature and clock display alternately,room tem- perature can be read out directly. 7）press both “ ”“ ”for five seconds to engage/dise-ngage key-lock function key-lock on shows“ ” (“ ”this symbol dispeared that shows key-lock off） on/off.“ ”