TorcUP TXU-2 Manuals

2 pdf manual(s) TorcUP TXU-2 for free download (Document Types: Manual , Operation and maintenance manual)

TorcUP TXU-2 Manual  [PDF] (32 pages)

  • Identifier: id-1164986
  • Brand: TorcUP
  • Device: TXU-2 Power Tool
  • Type: PDF
  • Key Aspects: Operational Mode Explanations, Risk Mitigation and Accident Prevention, Component Overview and Descriptions
  • UPD Date: 06.05.2026
  • Source File: 993374.pdf
  • Pages: 32
  • Description: Device setup manual for the TorcUP TXU-2.
Pages Preview:
  • 1 WARNING Operational and Maintenance Manual for TorcUP TXU-2, TXU-4, TXU-8, and TXU-16 Uniswivel Low Profile Hydraulic Torque Wrenches Version 2: 2016 September IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING TOOL. IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS MANUAL INTO THE HANDS OF THE OPERATOR. FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. Series TXU-2, TXU-4, TXU-8, and TXU-16
  • 2 Always wear eye protection when operating or performing maintenance on this tool. Always wear ear protection when operating this tool. Do not carry the tool by the hose. Keep body stance balanced and firm. Do not overreach when operating this tool. USING THE TOOL • Keep hands, loose clothing and long hair away from the reaction arm and working area during operation. • This tool will exert a strong reaction force. Use proper mechanical support and co
  • 3 PLACING THE TOOL IN SERVICE CONNECTING THE TOOL 1. Attach the twin line hose to the swivel inlets of the low profile drive cylinder using the spring–loaded quick connect ends. 2. Connect the opposite ends of the hose to the pump in the same manner. 3. Push the link retaining pin out of the low profile drive cylinder. 4. Mate the selected ratchet link to the cylinder by inserting the end of the cylinder opposite the swivel inlets between the side plates
  • 4 PLACING THE TOOL IN SERVICE 3. After having turned the pump on and presetting the pressure for the correct torque, depress the remote control button to advance the piston assembly. If the notch in the piston rod did not engage the retract pin in the ratchet link when the link was joined to the housing, it will engage the pin automatically during the first advance stroke. 4. When the link is connected to the cylinder and the wrench is started, the reacti
Document Preview & Text Transcription (Main Page)
Click to expand and read text
OPERATION AND MAINTENANCE MODELS TXU-2, TXU-4, TXU-8 and TXU-16 MANUAL TXU Series Uniswivel Low Profile Hydraulic Torque Wrenches TXU Series Phone: +1 610-250-5800 Fax: +1 610-250-2700 Toll Free: 1-888-TORCUP-1 Email: [email protected] Website: www.torcup.com 1025 Conroy Place, Easton, PA. 18040 U.S.A.

TorcUP TXU-2 Operation and maintenance manual [PDF] (37 pages)

  • Identifier: id-2404816
  • Brand: TorcUP
  • Device: TXU-2 Power Tool
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, End-of-Life Handling and Disposal, System Limitations and Considerations
  • UPD Date: 11.07.2026
  • Source File: 2399975.pdf
  • Pages: 37
  • Description: Product usage manual for the TorcUP TXU-2.
Pages Preview:
  • 1 WARNING Operational and Maintenance Manual for TorcUP TXU-2, TXU-4, TXU-8, TXU-16 & TXU-32 Uniswivel Low Profile Hydraulic Torque Wrenches Version 2: 2016 September IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING TOOL. IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE INFORMATION IN THIS MANUAL INTO THE HANDS OF THE OPERATOR. FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY. Series TXU-2, TXU-4, TXU-8, TXU-16
  • 2 Always wear eye protection when operating or performing maintenance on this tool. Always wear ear protection when operating this tool. Do not carry the tool by the hose. Keep body stance balanced and firm. Do not overreach when operating this tool. USING THE TOOL • Keep hands, loose clothing and long hair away from the reaction arm and working area during operation. • This tool will exert a strong reaction force. Use proper mechanical support and co
  • 3 PLACING THE TOOL IN SERVICE CONNECTING THE TOOL 1. Attach the twin line hose to the swivel inlets of the low profile drive cylinder using the spring–loaded quick connect ends. 2. Connect the opposite ends of the hose to the pump in the same manner. 3. Push the link retaining pin out of the low profile drive cylinder. 4. Mate the selected ratchet link to the cylinder by inserting the end of the cylinder opposite the swivel inlets between the side plates
  • 4 PLACING THE TOOL IN SERVICE 3. After having turned the pump on and presetting the pressure for the correct torque, depress the remote control button to advance the piston assembly. If the notch in the piston rod did not engage the retract pin in the ratchet link when the link was joined to the housing, it will engage the pin automatically during the first advance stroke. 4. When the link is connected to the cylinder and the wrench is started, the reacti
  • 5 TXU Series Uni-Swivel Wrench Technical & Dimensional Data Model Number TXU-2 TXU-4 TXU-8 TXU-16 Min. Torque (ft/lbs) 192 395 830 1560 Max. Torque (ft/lbs) 1928 3950 8630 16600 Min. Torque (nm) 260 535 1125 2115 Max. Torque (nm) 2614 5355 11699 22503 Output Accuracy +/-3% +/-3% +/-3% +/-3% Repeatability 100% 100% 100% 100% Duty Cycle 100% 100% 100% 100% Cylinder Weight (lbs/kg) 4.0/1.8 6.9/3.1 12.5/5.7 17.1/7.8 Link Weight (lbs) 2.4-3.5 5.4-7.6 11.9-14.5
Document Preview & Text Transcription (Main Page)
Click to expand and read text
OPERATION AND MAINTENANCE MODELS TXU-2, TXU-4, TXU-8, TXU-16, and TXU-32 MANUAL TXU Series Uniswivel Low Profile Hydraulic Torque Wrenches TXU Series Phone: +1 610-250-5800 Fax: +1 610-250-2700 Toll Free: 1-888-TORCUP-1 Email: [email protected] Website: www.torcup.com 1025 Conroy Place, Easton, PA. 18040 U.S.A.

TXU-2: Related Instructions

TXU Series
TorcUP TXU Series
19.07.2026 37 pages

OPERATION AND MAINTENANCE MODELS TXU-2, TXU-4, TXU-8, TXU-16, and TXU-32 MANUAL TXU Series Uniswivel Low Profile Hydraulic Torque Wrenches TXU Series Phone: +1 Complete service manual for the TorcUP TXU Series Power Tool. The document offers guidance on performance details, specifications, security instructions, system checks.

EP1000
TorcUP EP1000
31.03.2026 30 pages

User setup guide for the TorcUP EP1000 Water Pump. The manual provides information on operational procedures, hardware setup, safety guidelines.

SR Series
TorcUP SR Series
10.05.2026 45 pages

1 OPERATION AND MAINTENANCE MODELS SR-500, SR-1000, SR-2000, SR-3000 AND SR-6000 MANUAL SR SERIES Electric Torque Wrenches SR Series Phone: +1 610-250-5800 Fax: Device operation guide for the TorcUP SR Series Power Tool. This documentation details repair references, technical overview, technical guidelines.

SQ Series
TorcUP SQ Series
06.06.2026 28 pages

OPERATION AND MAINTENANCE MODELS SQ-1, SQ-3, SQ-5 & SQ-10 MANUAL SQ Series Uni-Swivel Square Drive Hydraulic Torque Wrenches SQ Series Phone: +1 610-250-5800 Fa Device operation guide for the TorcUP SQ Series Power Tool. The document provides guidance on safety and operational procedures, system parameters, technical assistance.

TX LINK Series
TorcUP TX LINK Series
18.06.2026 30 pages

Device user manual for the TorcUP TX LINK Series Power Tool. It covers topics such as hardware components, supported accessories, operational procedures, device calibration.

VT-500
TorcUP VT-500
18.06.2026 22 pages

1 OPERATION AND MAINTENANCE MODELS VT-500, VT-1000, VT-2000 AND VT-3000 MANUAL VT SERIES Battery-Powered Torque Wrenches VT Series Phone: +1 610-250-5800 Fax: + Reference manual for the TorcUP VT-500 Tools. The document contains software configuration, hardware setup, support details.

Similar Manuals in the Power Tool Category

AG 125-A22
Hilti AG 125-A22
19.06.2026 21 pages

*2027858* 2027858 AG 125-A22 Bedienungsanleitung de Operating instructions en Mode d’emploi fr Istruzioni d’uso it Manual de instrucciones es Manual de inst Comprehensive guide for the Hilti AG 125-A22 Grinder. It describes operating procedures and security instructions, backup procedures, operational procedures, hardware setup.

CP8848-2
Chicago Pneumatic CP8848-2
25.07.2026 36 pages

Operator’s Manual CP8848 Series 20V 1/2“ Impact Wrench WARNING 6159920340 Rev 04 - 04/2016 To reduce risk of injury, everyone using, installing, repairing, Instruction and reference manual for the Chicago Pneumatic CP8848-2 Power Tool. The document presents usage examples, component replacement, setup validation, connectivity options.

CJ 18DA
HIKOKI CJ 18DA
08.06.2026 228 pages

Handling instructions Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing Instrucciones de manejo Instruções de uso Bruksanvisning B Technical instruction manual for the HIKOKI CJ 18DA Power Tool. The document includes network setup, component replacement, technical guidelines.

VC-19D
Olympic VC-19D
17.03.2026 20 pages

1 VC-19D VER. ASM-01217 OPERATOR'S MANUAL VC-19D Operator’s manual OLYMPIC Technical operation manual for the Olympic VC-19D Power Tool. It describes step-by-step shutdown procedures, user instructions, system parameters.