Toro 03200 Reelmaster 3100-D Manuals

Form No. 3363-312 Rev C Reelmaster® 3100-D Traction Unit Model No. 03170—Serial No. 310000001 and Up Model No. 03171—Serial No. 310000001 and Up Model No. 03172 Model No. 03173 To register your product or download an Operator's Manual or Parts Catalog at no charge, go to www.Toro.com. Original Instructions (EN)

����������������������� ������������������������ ���������� ������ � ������������������ ������������� ������������������������������ ������������������������������ ��������������� ��������������� ���������������������������������������������� ����������������������������������������������������� ������������������������������������������������ ������������������������������������������������� ���������������������������������������������������� ���������������������������������������������� ������� ����� ���� ������� ������ ������� ������ �������� �������� ��� ������� �� ��������� ������ ��������������������� ��� ��������������������������� ������������������������������ ���������������������������������������������� ��������������������������������������������������� ������� �������� ������ ����� �������� ��������� ��� ������������������

Operator’s Manual English (EN, GB) Form No. 3350–555 Reelmaster� 3100–D Traction Unit Model No. 03200—240000001 and Up Model No. 03201—240000001 and Up Model No. 03220 Model No. 03221

Form No. 3361-268 Rev B Reelmaster® 3100-D Traction Unit Model No. 03206—Serial No. 290000001 and Up Model No. 03207—Serial No. 290000001 and Up Model No. 03220 Model No. 03221 To register your product or download an Operator's Manual or Parts Catalog at no charge, go to www.Toro.com. Original Instructions (EN)

Form No. 3407-833 Rev C 27in or 32in Rear Roller Brush Kit Reelmaster® 3100-D and 7000-D Edge Series Cutting Unit Model No. 03243 Model No. 03246 Installation Instructions Introduction This product complies with all relevant European directives. For details, please see the Declaration of Incorporation (DOI) at the back of this publication. WARNING CALIFORNIA Proposition 65 Warning Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Use 1 No parts required – Determine the position of the roller brushes and reel motors. Roller-brush housing 1 Hex-socket bolt (3/8 x 1 inch) 2 Roller-brush assembly 1 Shoulder bolt 1 Belt cover/plate assembly (left) 1 Bolt (5/16 x 1/2 inch) 2 Spacer 1 Drive pulley 1 Flange-head bolt (3/8 x 2 inches) 1 Belt 1 Shim washer (as required for belt alignment) 1 Driveshaft (right) 1 Driveshaft (left) 1 2 Grease fitting (90°) 1 Install the roller brush. 3 High height-of-cut brush (optional) — Install the high height-of-cut brush—for HOC greater than 2.5 cm (1 inch). © 2019—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3407-833* C

Form No. 3442-794 Rev A Reelmaster® 3100-D Traction Unit Model No. 03170—Serial No. 403430001 and Up Model No. 03171—Serial No. 403430001 and Up Register at www.Toro.com. Original Instructions (EN) *3442-794*

Form No. 3445-520 Rev B Reelmaster® 3100-D Traction Unit Model No. 03170—Serial No. 409210000 and Up Model No. 03171—Serial No. 409210000 and Up Register at www.Toro.com. Original Instructions (EN) *3445-520*

OPERATOR S MANUAL FORM NO. 3322-575 Rev A MODEL NO. 03200 - 90001 & UP MODEL NO. 03201 - 90151 & UP MODEL NO. 03220 MODEL NO. 03221 REELMASTER® 3100-D ® To understand this product, and for safety and optimum performance, read this manual before starting the engine. Pay special attention to SAFETY INSTRUCTIONS highlighted by this symbol. It means CAUTION, WARNING or DANGER— personal safety instruction. Failure to comply with the instruction may result in personal injury. ©The TORO COMPANY—1998

Form No. 3402-441 Rev B 5, 8, and 11-Blade 27-inch and 8-Blade 32-inch DPA Cutting Unit Reelmaster® 3100-D Series Traction Unit Model No. 03180—Serial No. 316000001 and Up Model No. 03181—Serial No. 316000001 and Up Model No. 03182—Serial No. 316000001 and Up Model No. 03183—Serial No. 316000001 and Up Register at www.Toro.com. Original Instructions (EN) *3402-441* B

Form No. 3407-799 Rev A 27-inch Verticutter Reelmaster® 3100-D Series DPA Cutting Unit Model No. 03203—Serial No. 400000000 and Up Register at www.Toro.com. Original Instructions (EN) *3407-799* A