Toro 51467 - Cordless Electric Trimmer Manuals

Form No. 3356-425 Rev A 8-inch Cordless Trimmer Model No. 51467—Serial No. 270000001 and Up Operator's Manual If you have questions or problems, call toll free 1-866-336-5208 (US) or 1-800-544-5364 (Canada) before returning this product. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING—Tor reduce the risk of fire, electric shock, or injury, follow these safety instructions. It is essential that you or any other operator of the appliance read and understand the contents of this manual before operating the appliance. Pay particular attention to the safety alert symbol which means CAUTION, WARNING or DANGER—personal safety instruction. Read and understand the instruction because it has to do with safety. Failure to comply with these instructions may result in personal injury, risk of fire, or electrical shock. Avoid dangerous environments—Do not use or charge the trimmer in damp or wet locations. Do not use or charge the trimmer in the rain. Keep children and bystanders away—All visitors should be kept at a distance from the work area. Dress properly—Do not wear loose clothing or jewelry; they can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. Use safety glasses—Safety glasses are available at most retail stores. Use a face or dust mask if operation is dusty. Use the right appliance—Do not use the trimmer for any job except that for which it was intended. Do not use it as an edger. Avoid unintentional starting—Do not carry the trimmer with your finger on the switch. Keep grass shield in place and in working order. Keep hands and feet away from the cutting area. Do not grasp the exposed blade under the grass shield. Stop the motor whenever you leave the trimmer, before cleaning the housing, and when making any repairs or inspections. Do not force the trimmer—It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed. Do not overreach—Keep proper footing and balance at all times. Stay alert—Watch what you are doing. Use common sense. Do not operate the trimmer when you are tired. Store the trimmer indoors—When not in use, store the trimmer indoors in a dry, high or locked up place, out of reach of children. Maintain the trimmer—Follow instructions for changing accessories. Inspect the trimmer periodically, and if damaged, have it repaired by an Authorized Toro Service Dealer. Keep the handles dry, clean, and free from oil and grease. The trimmer requires no lubrication. Check damaged parts—If any parts of the trimmer are damaged, stop the trimmer and have it repaired before operating the trimmer again. A damaged trimmer should only be repaired by an Authorized Toro Service Dealer. When servicing, use only identical Toro replacement parts. To reduce the risk of electrical shock, replace the charger immediately if the charger case or cord is damaged. SAVE THESE INSTRUCTIONS © 2006—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA. All Rights Reserved

Form No. 3379-657 Rev A 8in Cordless Trimmer Model No. 51467—Serial No. 314000001 and Up Operator's Manual Register at www.Toro.com. If you have questions or problems, contact us at www.Toro.com or call toll free 1-800-237-2654 (US) or 1-800-248-3258 (Canada) before returning this product. General Safety Rules WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. WARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: Read all instructions. The term “power tool” in all of the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. Work area safety A. Keep work area clean and well lit. Cluttered or dark areas invite accidents. B. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety A. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. B. Avoid body contact with earthed or grounded surfaces. There is an increased risk of electric shock if your body is earthed or grounded. C. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. D. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. E. If operating a power tool in a damp location is unavoidable, use a supply protected by a residual current device (RCD) in AUS or a ground fault interrupt (GFI) in the USA. Use of an RCD or GFI reduces the risk of electric shock. 3. Personal safety A. Stay alert; watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. B. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. C. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. D. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. E. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. F. Keep hands and feet away from the cutting area. 4. Power tool use and care A. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. B. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. © 2013—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in China All Rights Reserved *3379-657* A

Form No. 3425-129 Rev D 8in Cordless Trimmer Model No. 51467—Serial No. 319000001 and Up Operator's Manual If you have questions or problems, contact us at www.Toro.com or call toll free 1-800-237-2654 (US) or 1-800-248-3258 (Canada) before returning this product. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, the complete warranty details, or to register your product. WARNING CALIFORNIA Proposition 65 Warning The power cord on this product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. General Safety Rules WARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: Read all instructions. The term “power tool” in all of the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. Work area safety A. Keep work area clean and well lit. Cluttered or dark areas invite accidents. B. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety A. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. B. Avoid body contact with earthed or grounded surfaces. There is an increased risk of electric shock if your body is earthed or grounded. C. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. D. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. E. If operating a power tool in a damp location is unavoidable, use a supply protected by a residual current device (RCD) in AUS or a ground fault interrupt (GFI) in the USA. Use of an RCD or GFI reduces the risk of electric shock. 3. Personal safety A. Stay alert; watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. B. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. C. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. D. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. E. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. F. Keep hands and feet away from the cutting area. 4. Power tool use and care A. Do not force the power tool. Use the correct power tool for your application. The correct power tool will © 2018—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in China All Rights Reserved *3425-129* D