Toro EVOLUTION Series Manuals

6 pdf manual(s) Toro EVOLUTION Series for free download (Document Types: Installation manual, Manual , Quick start manual)

Toro EVOLUTION Series Installation manual [PDF] (3 pages)

  • Identifier: id-1654431
  • Brand: Toro
  • Device: EVOLUTION Series Controller
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, Basic Configuration Guidelines, Device Specifications Overview
  • UPD Date: 16.03.2026
  • Source File: 1664298.pdf
  • Pages: 3
  • Description: Technical operation manual for the Toro EVOLUTION Series.
Pages Preview:
  • Upgrade from Version 2.0 and Earlier: A video demonstrating the firmware upgrade procedure is available at: www.toro.com/evolution (US & Canada) www.toroevolution.com (int’l). Open the EVOLUTION controller. If backup battery is present, remove it. Insert USB drive into controller USB slot. Remove power from the controller. • Unplug AC (preferred) OR • Remove ribbon cable Controller will automatically recognize USB drive and upgrade the controller.
  • Upgrade to Version 2.13 and Later: Technical Support: 1-877-345-8676 (USA & Canada) evolution@toro.com (international) ©2015 The Toro Company, Irrigation Division • www.toro.com Form Number 373-0854 Rev. A Congratulations! Your EVOLUTION controller is now ready to work with Smart Connect. Open the EVOLUTION controller. Confirm USB drive is in the controller USB slot. Enter the ADVANCED menu. Navigate to FIRMWARE. Press SELECT. Navigate to UPDATE.
Document Preview & Text Transcription (Main Page)
Click to expand and read text
EVOLUTION® Firmware Update Installation Guide EVOLUTION® Firmware Update Installation Guide Prepare the USB drive Recommended: • formatted FAT32 • 1-8 GB • USB 2.0 compliant • no other files Insert USB drive into computer USB slot. In the USB drive root folder, create new folder called EVOLUTION. Within that folder, create new folder called FIRMWARE. Download the firmware files Browse to Toro’s EVOLUTION page: USA and Canada: www.toro.com/evolution Int’l: www.toroevolution.com Click on the Downloads link. Click the “Download EVOLUTION Controller Updates 2.13” link. Download the file to your computer’s desktop. Extract and copy the files to the USB drive On the desktop, double-click the ZIP file. You will see four files. Sweep and COPY those files. Navigate to the FIRMWARE folder on the USB drive. PASTE the files into that folder. EJECT and remove the USB thumb drive. 1 1 1 2 2 2 3 3 3 4 B C At the Computer NSN Computer MENU POWER AUTO + - A The EVOLUTION controller can be updated by downloading the latest controller firmware from Toro’s website, loading the firmware onto a USB drive, and inserting it into the controller’s USB port. There are two different methods to load the firm- ware depending on the version currently running on your EVOLUTION controller. Page 2 details 2.0 and earlier. Page 3 is for 2.13 and later. To find your current version, at the controller navigate to and select FIRMWARE in the ADVANCED menu.

Toro EVOLUTION Series Manual  [PDF] (96 pages)

  • Identifier: id-1654432
  • Brand: Toro
  • Device: EVOLUTION Series Kitchen Appliances
  • Type: PDF
  • Key Aspects: Technical Data and Parameters, Additional Modules and Accessories Guide, System Connectivity and Wiring Basics
  • UPD Date: 28.03.2026
  • Source File: 1664297.pdf
  • Pages: 96
  • Description: Professional manual for the Toro EVOLUTION Series.
Pages Preview:
  • 2 Specifications 1 Weather Sensor Overview 3 Installation 4 Smart Connect® 4 The SD Card Explained 4 Adding the Sensor to the Controller 4 Adjusting the Rain Sensor Threshold 7 Weather Sensor 7 Basic Operation 9 Menu Navigation 9 Getting to the Sensors Menu 9 Weather Sensor Menu 10 Current Adjust 10 Temperature 10 Rain Status 10 Freeze Off 10 Dryout Days 10 Water Adjust 10 Update Time 11 Average
  • 3 1. Rain Sensor Test Pin Pressing the test pin simulates operation of the Rain Sensor by transmitting a signal to the Smart Pod. 2. Rain Sensor Adjustment Cap The Rain Sensor sensitivity is adjustable to suspend watering at 1/8”, 1/4”,, 1/2” and 3/4” (3 mm, 6 mm, 12 mm and 19 mm) of accumulated rainfall. 3. Solar Collector Solar radiation and temperature are used by the Smart Pod to calculate and adjust watering to suit current weather conditio
  • 4 EVOLUTION® Smart Connect® SD Card Explained The supplied SD card contains forty years of weather data for all latitudes, longitudes, and zip codes in North America. When the weather sensor's location is entered in the controller (page 6), historical weather data is loaded into the controller. In the event your controller loses connectivity to the weather sensor, the controller will use the the historical weather data to determine the irrigation run tim
  • 5 3. to WEATHER. to ADD. to confirm. 4. The EVOLUTION® controller waits for the identification signal from the weather sensor. 5. Activate the sensor. ! The EVO-WS Weather Sensor is shipped with the battery circuit deactivated. It is necessary to activate the sensor prior to installation. To activate the sensor: For new sensors, press and hold the Test Pin for 10-15 seconds. A red LED, viewable from the lower vent area, will illuminate twice after 1
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 Specifications Introduction EVOLUTION® Series Add-On: EVO-WS Weather Sensor EVOLUTION® Series Add-On: EVO-WS Weather Sensor Congratulations on purchasing Toro’s new EVOLUTION Series Controller with the EVO-WS Weather Sensor Add-On. With the Weather Sensor Add-On, you will quickly realize savings in both time and money while keeping your garden healthy and beautiful. The EVO-WS Wireless Weather Sensor system is designed exclusively for your Toro EVOLUTION Series Controller to continuously monitor and adjust automatic watering to suit current watering needs. The Wireless Sensor system consists of a remote Weather Sensor. The sensor detects current sunlight level, temperature and rainfall, then transmits this information wirelessly to the Smart Connect™ (offered seperately) device plugged into the EVOLUTION Series Controller. The controller then adjusts the running time to provide the optimum amount of water required for the next watering day. To familiarize yourself with EVO-WS Weather Sensor system, please take a few moments to read through this guide in its entirety. • Dimensions: 2.75” (7 cm) W x 7” (17,8 cm) H (over 2” [5 cm] anten­ na) x 6.25” (15,9 cm) D (over 4” [10,2 cm] mounting bracket) • 9V Alkaline battery (included) • RF reception range: 1000’ (305 m) LOS (line of sight) • Operating temperature range: 14° – 140° F ( -10°– 60°C) LISTED FCC-ID: OF7WS9 IC: 3575A-WS9

Toro EVOLUTION Series Manual  [PDF] (16 pages)

  • Identifier: id-1426963
  • Brand: Toro
  • Device: EVOLUTION Series Kitchen Appliances
  • Type: PDF
  • Key Aspects: Critical Operational Precautions, Manufacturer Contact and Support Data, FAQ Section for Common Queries
  • UPD Date: 10.06.2026
  • Source File: 1571481.pdf
  • Pages: 16
  • Description: Full technical guide for the Toro EVOLUTION Series.
Pages Preview:
  • 2 Specifications 1 Weather Sensor Overview 3 Installation 4 Smart Connect® 4 The SD Card Explained 4 Adding the Sensor to the Controller 4 Adjusting the Rain Sensor Threshold 7 Weather Sensor 7 Basic Operation 9 Menu Navigation 9 Getting to the Sensors Menu 9 Weather Sensor Menu 10 Current Adjust 10 Temperature 10 Rain Status 10 Freeze Off 10 Dryout Days 10 Water Adjust 10 Update Time 11 Average
  • 3 1. Rain Sensor Test Pin Pressing the test pin simulates operation of the Rain Sensor by transmitting a signal to the Smart Connect. 2. Rain Sensor Adjustment Cap The Rain Sensor sensitivity is adjustable to suspend watering after 1/8”, 1/4”, 1/2” or 3/4” (3 mm, 6 mm, 12 mm and 19 mm) of accumulated rainfall. 3. Solar Collector Solar radiation and temperature are used by the Weather Sensor to calculate and adjust watering to suit current weather c
  • 4 EVOLUTION® Smart Connect® SD Card Explained The supplied SD card contains forty years of weather data for all latitudes, longitudes, and zip codes in North America. When the weather sensor's location is entered in the controller (page 6), historical weather data is loaded into the controller. In the event your controller loses connectivity to the weather sensor, the controller will use the the historical weather data to determine the irrigation run tim
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 Specifications Introduction EVOLUTION® Series Add-On: Wireless ET Weather Sensor (EVO-WS) Thank you for purchasing Toro's Wireless ET Weather Sensor for your EVOLUTION® Series Controller. With the Weather Sensor, you will quickly realize savings in both time and money while keeping your landscape healthy and beautiful. The Weather Sensor system is designed exclusively for your Toro EVOLUTION Series Controller to continuously monitor on-site weather and make automatic adjustments to the watering schedule based on current conditions. The sensor detects current sunlight level, temperature and rainfall and transmits this information wirelessly to the required Smart Connect (EVO-SC, sold separately) device plugged into the EVOLUTION Series Controller. The controller then adjusts the schedule runtimes to provide the optimum amount of water required for the next watering day. To familiarize yourself with Wireless ET Weather Sensor system, please take a few moments to read through this guide in its entirety. • Dimensions: 2.75” (7 cm) W x 7” (17,8 cm) H (over 2” [5 cm] anten- na) x 6.25” (15,9 cm) D (over 4” [10,2 cm] mounting bracket) • 9V Alkaline battery (included) • RF reception range: 1000’ (305 m) LOS (line of sight) • Operating temperature range: 14° – 140° F ( -10°– 60°C) LISTED FCC-ID: OF7WS9 IC: 3575A-WS9

Toro EVOLUTION Series Manual  [PDF] (48 pages)

  • Identifier: id-2404327
  • Brand: Toro
  • Device: EVOLUTION Series Remote Control
  • Type: PDF
  • Key Aspects: Hardware Verification Checklists, Component Overview and Descriptions, Warranty and Service Information
  • UPD Date: 04.04.2026
  • Source File: 2400464.pdf
  • Pages: 48
  • Description: Instruction booklet for the Toro EVOLUTION Series.
Pages Preview:
  • 2 Specifications 1 Overview 3 Installation 3 EVOLUTION® Smart Connect® 3 Installing the Remote Batteries 3 At the Controller 4 Menu Navigation 4 Adding the Device 4 At the Remote 5 Set the PIN 5 Powering the Remote 5 Set the Number of Stations 5 Start Program “A”, “B”, or “C” 5 Run an All Stations Cycle 6 Turn on a Station or Zone Manually 6 Stop All Watering 6 Change From One Running Station to Another 6 Remote Auxiliary Operation 6 Switch t
  • 3 Enter Setup PWR (Hold) Mode Cancel Setup button Left arrow USB Cover (future use) Cancel button Up arrow Power button Right arrow Enter button LCD Screen Installation EVOLUTION® Smart Connect® Please see the install sheet that came with the Smart Connect device. Installing the Remote Batteries The remote receives power from a 9-volt battery (not included). To install the battery: 1. Remove the three (3) screws from the battery cover on the back of the
  • 4 Menu Navigation • Use or to navigate the menu commands. • To change a value, press or to move to the desired field, then press and to adjust the value. • Press SELECT to input the desired value. Adding the Device For the EVOLUTION® Series controller and remote to successfully communicate, identical PINs must be set in both the controller and remote. At the controller: 1. Press ADVANCED then . 2. Press to ADD/REMOVE DEVICE. Press . 3. Pre
  • 5 Set the PIN 1. Press Mode PWR(Hold) to turn on the remote transmitter. 2. Press Setup twice. “SET PIN” appears on the screen. 3. Press or to set the first digit of the PIN number. Press to move to the next digit. 4. Repeat step 3 to set the other numbers in the 4-digit PIN. 5. Press Enter to save the PIN. Powering the Remote • Press Mode PWR(Hold) to turn on the remote. • Press and hold Mode PWR(Hold) about two seconds to turn off. Turni
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 EVOLUTION® Series Add-On: EVO-HH Handheld Remote EVOLUTION® Series Add-On: EVO-HH Handheld Remote Introduction Congratulations on purchasing Toro’s new EVOLUTION Series Controller with the EVO-HH Handheld Remote Add-On. With the Handheld Remote Add-On, you will quickly realize savings in both time and money while keeping your landscape healthy and beautiful. The EVO-HH system is designed exclusively for your Toro EVOLUTION Series Controller to allow the user to remotely control watering and auxiliary zones. The user can walk the site, testing, troubleshooting, and/or providing supplemental watering without walking back to the controller every time. To familiarize yourself with EVO-HH handheld system, please take a few moments to read through this guide in its entirety. Specifications Handheld Remote • Dimensions: 2.75” (7 cm) W x 7” (17,8 cm) H (over 2” antenna) x 1.25” (3,2 cm) D (including mounting clip) • 9V Alkaline battery (not included) • RF reception range: 1000’ (152 m) LOS (line of sight) • Operating temperature range: 14° – 140° F ( -10°– 60°C) Enter Setup PWR (Hold) Mode Cancel LISTED FCC-ID: OF7CLR1 IC: 3575A-CLR1

Toro EVOLUTION Series Quick start manual [PDF] (8 pages)

  • Identifier: id-1654430
  • Brand: Toro
  • Device: EVOLUTION Series Irrigation System
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, Troubleshooting Information, Step-by-Step Assembly Procedures
  • UPD Date: 18.03.2026
  • Source File: 1664299.pdf
  • Pages: 8
  • Description: Instruction reference guide for the Toro EVOLUTION Series.
Pages Preview:
  • 2 Specifications 1 Overview 3 Installation 3 EVOLUTION® Smart Connect® 3 Installing the Remote Batteries 3 At the Controller 4 Menu Navigation 4 Adding the Device 4 At the Remote 5 Set the PIN 5 Powering the Remote 5 Set the Number of Stations 5 Start Program “A”, “B”, or “C” 5 Run an All Stations Cycle 6 Turn on a Station or Zone Manually 6 Stop All Watering 6 Change From One Running Station to Another 6 Remote Auxiliary Operation 6 Switch t
  • 3 Enter Setup PWR (Hold) Mode Cancel Setup button Left arrow USB Cover (future use) Cancel button Up arrow Power button Right arrow Enter button LCD Screen Installation EVOLUTION® Smart Connect® Please see the install sheet that came with the Smart Connect device. Installing the Remote Batteries The remote receives power from a 9-volt battery (not included). To install the battery: 1. Remove the three (3) screws from the battery cover on the back of the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 EVOLUTION® Series Add-On: EVO-HH Handheld Remote EVOLUTION® Series Add-On: EVO-HH Handheld Remote Introduction Congratulations on purchasing Toro’s new EVOLUTION Series Controller with the EVO-HH Handheld Remote Add-On. With the Handheld Remote Add-On, you will quickly realize savings in both time and money while keeping your landscape healthy and beautiful. The EVO-HH system is designed exclusively for your Toro EVOLUTION Series Controller to allow the user to remotely control watering and auxiliary zones. The user can walk the site, testing, troubleshooting, and/or providing supplemental watering without walking back to the controller every time. To familiarize yourself with EVO-HH handheld system, please take a few moments to read through this guide in its entirety. Specifications Handheld Remote • Dimensions: 2.75” (7 cm) W x 7” (17,8 cm) H (over 2” antenna) x 1.25” (3,2 cm) D (including mounting clip) • 9V Alkaline battery (not included) • RF reception range: 1000’ (152 m) LOS (line of sight) • Operating temperature range: 14° – 140° F ( -10°– 60°C) Enter Setup PWR (Hold) Mode Cancel LISTED FCC-ID: OF7CLR1 IC: 3575A-CLR1

Toro EVOLUTION Series Operation & user’s manual [PDF] (30 pages)

  • Identifier: id-1426964
  • Brand: Toro
  • Device: EVOLUTION Series Controller
  • Type: PDF
  • Key Aspects: Regulatory Compliance and Standards, Safety Recommendations and Warnings, Storage and Care Recommendations
  • UPD Date: 25.05.2026
  • Source File: 1571480.pdf
  • Pages: 30
  • Description: Professional manual for the Toro EVOLUTION Series.
Pages Preview:
  • ii
  • iii Table of Contents Controller Introduction Timing Mechanism- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 Internal Components - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Home Screen Messages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Setup Screen - - - - - - - - - -
  • iv Schedule Details - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Maximum Schedule- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Status - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Type - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  • 1 Thank you for purchasing Toro’s new EVOLUTION TM Series Controller delivering unprecedented control and ease-of-use of your irrigation system. The EVOLUTION TM controller is easily expandable from 4-zones to 8- and even 12-, giving the controller the ability to handle even the largest of residential irrigation systems. EVOLUTION TM allows a rain sensor or soil sensor to be attached further automating your irrigation needs. Using the bundled EVOLUT
  • 2 Εσωτερικά χαρακτηριστικά 1 4 5 6 7 8 79 2 3 Figure 2 1 – Πλακέτα ζώνης και αισθητήρα VALVE TEST – Χρησιμοποιέιστε για να ελέγξετε τις ηλεκτροβάνες. 24VAC – 24 VAC πηγή ενέργειας GND – Γείωση SENSOR – Πλακέτα αισθητήρων MV PUMP – Master ηλεκτροβάνα COM – Κοινό καλώδιο Ζώνη (στά
Document Preview & Text Transcription (Main Page)
Click to expand and read text
i EVOLUTION TM Series Controller User’s Guide

Toro EVOLUTION Series: Controller, Irrigation System, Kitchen Appliances, Remote Control Category Related Instructions

RTU32S Series
Brodersen RTU32S Series
19.05.2026 22 pages

RTU32S RTU32S Series – Small Compact Utility RTU Installation and Wiring Guide Version 1.03 / Nov. 2016 / DOC 40350 Maintenance instructions for the Brodersen RTU32S Series Controller. It details operating modes and backup procedures, system checks, operating guidelines, device instructions.

Power commander v
Dynojet Power commander v
10.04.2026 5 pages

19-013 www.powercommander.com 08-10 Polaris RZR PCV - 1 PARTS LIST 1 Power Commander 1 USB Cable 1 CD-ROM 1 Installation Guide 2 Power Commander Decals 2 Dynojet Decals 2 Velcro 1 Alcohol swab 2 Zip ties YOU CAN ALSO DOWNLOAD THE POWER COMMANDER SOFTWARE AND Official installation manual for the Dynojet Power commander v Offroad Vehicle. It provides information on installation and configuration options, support details, internal layout.

EMS-96
MICROENER EMS-96
20.07.2026 51 pages

EMS-96 Electrical Measurement Supervisor User Manual FDE 13JMC3520859 rev A2 Full operation manual for the MICROENER EMS-96 Controller. The document contains repair references, product handling, performance guidelines.

EL Series
Balboa Instruments EL Series
28.06.2026 10 pages

53857_02-97_A EL8000 Mach 3 Hot Sheet 53857_02-97_A.pdf 11/27/2006 Template used: 40575-v28_A.pdf 11/22/2006 ������������������ ������������������ System Model # EL8-EL8000M3-YCAH Softwa Manual for installation and usage of the Balboa Instruments EL Series Controller. It describes maintenance tasks and maintenance schedule, wiring diagrams, technical assistance, hardware instructions.