Toro Recycler 20958 Manuals

Form No. 3426-922 Rev A 55cm Recycler® Lawn Mower 20958 Recycler® Rasenmäher (55 cm) 20958 Tondeuse Recycler® de 55 cm 20958 55 cm Recycler® gazonmaaier 20958 www.Toro.com. *3426-922* A

Form No. 3387-785 Rev A 55cm Recycler® Lawn Mower Model No. 20958—Serial No. 315000001 and Up Operator's Manual Introduction This rotary-blade, walk-behind lawn mower is intended to be used by residential homeowners. It is designed primarily for cutting grass on well-maintained lawns on residential properties. It is not designed for cutting brush or for agricultural uses. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, or to register your product. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Figure 1 1. Model and serial number plate Write the product model and serial numbers in the space below: Model No. Serial No. This manual identifies potential hazards and has safety messages identified by the safety alert symbol (Figure 2), which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions. Figure 2 1. Safety alert symbol This manual uses 2 words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention. This product complies with all relevant European directives. For details, see the separate product-specific Declaration of Conformity (DOC) sheet. Net Torque: The gross or net torque of this engine was laboratory rated by the engine manufacturer in accordance with the Society of Automotive Engineers (SAE) J1940. As configured to meet safety, emission, and operating requirements, the actual engine torque on this class of mower will be significantly lower. Go to www.Toro.com to view specifications on your mower model. Do not tamper with the engine controls or alter the governor speed; doing so may create an unsafe condition resulting in personal injury. Contents Introduction .................................................................. 1 Safety ........................................................................... 2 General Lawn Mower Safety ..................................... 2 Sound Pressure ...................................................... 3 Sound Power .......................................................... 3 Hand/Arm Vibration .............................................. 4 Safety and Instructional Decals ................................. 4 Setup ............................................................................ 5 1 Installing the Blade-Control Bar.............................. 5 2 Installing the Handle ............................................. 5 3 Installing the Recoil-Starter Rope in the Rope Guide................................................................. 6 4 Filling the Engine with Oil...................................... 6 5 Assembling the Grass Bag...................................... 7 Product Overview .......................................................... 8 Specifications ......................................................... 8 Operation ..................................................................... 9 Filling the Fuel Tank ................................................ 9 Checking the Engine-Oil Level.................................. 9 Adjusting the Cutting Height....................................10 Starting the Engine.................................................10 © 2014—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3387-785* A

Form No. 3381-259 Rev A 55cm Recycler® Lawn Mower Model No. 20958—Serial No. 314000001 and Up Operator's Manual Introduction This rotary-blade, walk-behind lawn mower is intended to be used by residential homeowners. It is designed primarily for cutting grass on well-maintained lawns on residential properties. It is not designed for cutting brush or for agricultural uses. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, or to register your product. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Figure 1 1. Model and serial number plate Write the product model and serial numbers in the space below: Model No. Serial No. This manual identifies potential hazards and has safety messages identified by the safety alert symbol (Figure 2), which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions. Figure 2 1. Safety alert symbol This manual uses 2 words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention. This product complies with all relevant European directives. For details, see the separate product-specific Declaration of Conformity (DOC) sheet. For models with stated engine horsepower, the gross horsepower of the engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of lawn mower will be significantly lower. Do not tamper with the engine controls or alter the governor speed; doing so may create an unsafe condition resulting in personal injury. Contents Introduction .................................................................. 1 General Lawn Mower Safety ..................................... 2 Sound Pressure ...................................................... 3 Sound Power .......................................................... 3 Hand/Arm Vibration .............................................. 3 Safety and Instructional Decals ................................. 4 Setup ............................................................................ 5 1 Installing the Blade Control Bar .............................. 5 2 Installing the Handle ............................................. 5 3 Installing the Recoil-starter Rope in the Rope Guide................................................................. 5 4 Filling the Engine with Oil...................................... 6 Product Overview .......................................................... 7 Specifications ......................................................... 7 Operation ..................................................................... 7 Filling the Fuel Tank ................................................ 7 Checking the Engine Oil Level .................................. 8 Adjusting the Cutting Height .................................... 8 Starting the Engine.................................................. 9 Using the Self-propel Drive....................................... 9 Stopping the Engine ................................................ 9 Engaging the Blade.................................................10 © 2014—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3381-259* A

Form No. 3374-867 Rev A 55cm Recycler® Lawn Mower Model No. 20958—Serial No. 310000001 and Up Operator's Manual Replacement parts are available from an Authorized Service Dealer or at www.shoptoro.com. Introduction This rotary-blade, walk-behind lawn mower is intended to be used by residential homeowners. It is designed primarily for cutting grass on well-maintained lawns on residential properties. It is not designed for cutting brush or for agricultural uses. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, or to register your product. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Figure 1 1. Model and serial number plate Write the product model and serial numbers in the space below: Model No. Serial No. This manual identifies potential hazards and has safety messages identified by the safety alert symbol (Figure 2), which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions. Figure 2 1. Safety alert symbol This manual uses 2 words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention. This product complies with all relevant European directives. For details, see the separate product-specific Declaration of Conformity (DOC) sheet. For models with stated engine horsepower, the gross horsepower of the engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of lawn mower will be significantly lower. Do not tamper with the engine controls or alter the governor speed; doing so may create an unsafe condition resulting in personal injury. Contents Introduction .................................................................. 1 General Lawn Mower Safety ..................................... 2 Sound Pressure ...................................................... 3 Sound Power .......................................................... 3 Hand/Arm Vibration .............................................. 3 Safety and Instructional Decals ................................. 4 Setup ............................................................................ 5 1 Installing the Blade Control Bar .............................. 5 2 Installing the Handle ............................................. 5 3 Filling the Engine with Oil...................................... 5 Product Overview .......................................................... 6 Specifications ......................................................... 6 Operation ..................................................................... 7 Filling the Fuel Tank ................................................ 7 Checking the Engine Oil Level .................................. 7 Adjusting the Cutting Height .................................... 8 © 2012—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3374-867* A

Form No. 3400-886 Rev A 55cm Recycler® Lawn Mower 20958 Recycler® Rasenmäher (55cm) 20958 Tondeuse Recycler® 55 cm 20958 55cm Recycler® gazonmaaier 20958 www.Toro.com. *3400-886* A

Form No. 3400-880 Rev A 55cm Recycler® Lawn Mower Model No. 20958—Serial No. 316000001 and Up Operator's Manual Replacement parts are available from an Authorized Service Dealer or at www.shoptoro.com. Introduction This rotary-blade, walk-behind lawn mower is intended to be used by residential homeowners. It is designed primarily for cutting grass on well-maintained lawns on residential properties. It is not designed for cutting brush or for agricultural uses. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, or to register your product. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. g036584 Figure 1 1. Model and serial number plate Write the product model and serial numbers in the space below: Model No. Serial No. This manual identifies potential hazards and has safety messages identified by the safety-alert symbol (Figure 2), which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions. g000502 Figure 2 1. Safety-alert symbol This manual uses 2 words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention. Important: If you are using this machine above 1500 m (5,000 ft) for a continuous period, ensure that the High Altitude Kit has been installed so that the engine meets CARB/EPA emission regulations. The High Altitude Kit increases engine performance while preventing spark-plug fouling, hard starting, and increased emissions. Once you have installed the kit, attach the high-altitude label next to the serial decal on the machine. Contact any Authorized Toro Service Dealer to obtain the proper High Altitude Kit and high-altitude label for your machine. To locate a dealer convenient to you, access our website at www.Toro.com or contact our Toro Customer Care Department at the number(s) listed in your Emission Control Warranty Statement. Remove the kit from the engine and restore the engine to its original factory configuration when running the engine under 1500 m (5,000 ft). Do not operate an engine that has been converted for high-altitude use at lower altitudes; otherwise, you could overheat and damage the engine. If you are unsure whether or not your machine has been converted for high-altitude use, look for the following label (Figure 3). © 2016—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3400-880* A