Toro Reelmaster 5610-D Manuals

Form No. 3425-668 Rev A Driveplate Kit Reelmaster® 5410/5510/5610-D or Groundsmaster® 4300-D Series Traction Unit with Yanmar Engine Model No. 138-6973 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. Use No parts required – Prepare the machine. No parts required – Remove the hood saddle and drive-line guard. No parts required – Remove the driveshaft and flywheel-adapter plate. Flywheel-adapter plate 1 Backup plate 1 Capscrew (3/8 x 1 inch) 6 Flange locknut (3/8 inch) 6 Replace the flywheel-adapter plate. Flange-head capscrew 8 Backup ring 2 Install the driveshaft and flywheel-adapter plate. No parts required – Install the drive-line guard and hood saddle. No parts required – Finish the kit installation. Preparing the Machine CAUTION If you leave the key in the switch, someone could accidently start the engine and seriously injure you or other bystanders. Remove the key from the switch before you perform any maintenance. 1. Park the machine on a level surface, engage the parking brake, lower the cutting units, shut off the engine, remove the key, and wait for all movement to stop before leaving the operator’s seat. 2. Unlatch and tip the operator’s seat. 3. Unlatch and open the hood. Removing the Hood Saddle and Drive-Line Guard 1. Lift the hood saddle from the saddle brackets, and remove hood saddle from the machine (Figure 1). © 2018—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN) Printed in the USA All Rights Reserved *3425-668* A

Form No. 15216SL Rev C Reelmaster® 5410/5510/5610 Series (Models with InfoCenter Display) © 2019—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 Original Instructions (EN) Contact us at www.Toro.com. All Rights Reserved

Form No. 3428-163 Rev A Reelmaster® 5610-D Traction Unit Model No. 03679—Serial No. 403410001 and Up Register at www.Toro.com. Original Instructions (EN) *3428-163* A

Form No. 3450-425 Rev A Reelmaster® 5610-D Traction Unit Model No. 03679—Serial No. 410400000 and Up Register at www.Toro.com. Original Instructions (EN) *3450-425*