TP-Link AD7200 Manuals

Quick Installation Guide AD7200 Multi-band Wi-Fi Router Connecting the Hardware Turn on the modem, and then wait about 2 minutes for it to restart. Connect the modem to the Internet port on your router with an Ethernet cable. If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router’s Internet port, then follow steps 5 and 6 to complete the hardware connection. Router Modem Power adapter 7106506096 REV1.0.1 Turn off the modem, and remove the backup battery if it has one. 2 Place the router horizontally and extend the antennas to the maximum angle. 1 Note: For best performance, horizontal installation is recommended. Antenna direction and position can affect performance in vertical installation situations. 4 3 Turn on the router. 5 Verify that the following LEDs are on and stable before continuing with the configuration. 6 Internet On Internet 5GHz On 60GHz On Power On 2.4GHz On AD7200 Note: 1. If all the LEDs are off, press the LED On/Off button for 1 second, then check the LEDs again. 2. If the 2.4GHz, 5GHz, and 60GHz LEDs are off, press the Wi-Fi On/Off button for 2 seconds, then check the LEDs again in a few seconds. Power adapter

REV1.0.0 1910011594 AD7200 User Guide AD7200 Multi-Band Wi-Fi Router

REV2.0.0 1910012084 User Guide AD7200 Multi-Band Wi-Fi Router AD7200

REV4.0.0 1910012048 User Guide AC1900 Wireless Dual Band Gigabit Router Archer C9