TP-Link NC450 Manuals

Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. www.tp-link.com › English › Български › Čeština › Қазақша › Lietuvių › Magyar › Polski › Русский язык › Română › Slovenčina › Srpski jezik › Українська мова Cloud Camera Quick Installation Guide MADE IN CHINA NOTE: The product model shown in this QIG for Cloud Camera is “NC450”. TP-LINK TECHNOLOGIES CO., LTD. 7106506586 REV1.0.0

Connect the NC450 and your smartphone to the same router, then connect the power cord and internet cord to the NC450. If the cord is long enough, please use Method A below. If not, use a Passive PoE Injector to connect, as shown in Method B. Place the camera where you want it. You can place it on a flat surface, or mount it as shown on the back of this guide. Download the tpCamera app. Once installed, open it and follow the instructions to add the camera to your TP-Link ID. View live video using the tpCamera app or TP-Link Cloud website. Via tpCamera: On the "My Cam" screen, tap your camera to view video. Change the camera angle using the pan and tilt controls. Via TP-Link Cloud website: Log in at https://www.tplinkcloud.com and select your camera to view live video. Quick Installation Guide Flashing red: System starting Solid red: Network not connected Solid green: Network connected System LED OR Short Press to trigger WPS; Press and hold for 5 seconds to trigger Reset. More functions with tpCamera Get notifications when motion is detected, and view alerts history. Stay in touch with 2-way audio. View all of your cameras on one screen by downloading the TP-Link Camera Control utility. See the Camera Control User Guide for more details. Or visit us online at www.tp-link.com for Camera Control utility, Firmware, and other support. Connect Register Relocate View and Enjoy WPS (Wi-Fi Protected Setup): If your Wi-Fi router supports WPS, you can connect the camera to your Wi-Fi network using WPS. For details, see the camera’s User Guide. The WPS/Reset Button Mounting Kit Wall Mounting Place the paper drill guide where you want the camera. Check the alignment using a level. Using a 0.24 inch (6mm) drill bit, drill holes through the two circles on the guide. Remove the paper. Insert the two anchors into the holes and place the camera mount over the anchor. Attach the camera and use the screws to secure it. Mount Base Secure Camera 1 2 3 1 2 3 Drill Holes Mount Base Secure Camera 1 2 3 1 2 3 4 1 2 3 Drill Holes Camera Ceiling mount kit Base Wall mount kit Ceiling Mounting Place the paper drill guide where you want the camera*. Using a 0.24 inch (6mm) drill bit, drill holes through the two circles on the guide. Remove the paper. * Camera placement can affect viewing angle. For best results, place the camera near a wall or corner. Attach the camera mount using the screws, washers and wingnuts. Attach the camera and use the screws to secure it. Camera Passive POE Injector Outlet Wireless Router Smartphone LAN WAN Internet Camera Outlet A B WPS/ RESET For technical support and other information, please visit http://www.tp-link.com/support. Support ©2017 TP-Link

User Guide HD Pan/Tilt Wi-Fi Camera NC450 1910012287 REV2.2.0

NC450 HD Pan/Tilt Wi-Fi Camera with Night Vision 1910011601 REV1.0.0