TP-Link TL-WR1043ND Manuals

Router Quick Installation Guide 450Mbps Wireless N Gigabit Router Connect the Hardware Turn on the modem, and then wait about 2 minutes for it to restart. Verify that the following LEDs are on and solid before continuing with the configuration. If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router’s Internet port, then follow step 5 and 6 to complete the hardware connection. Modem Power adapter Power adapter Turn of the modem, and remove the backup battery if it has one. 2 4 Power on the router. 5 3 6 Internet 1 Install the antennas and position them vertically. TL-WR1043ND Connect the modem to the Internet port on the router via an Ethernet cable. On Power On Wireless On Internet Note: If the wireless LED is not on, please press and hold the wireless button on the rear panel for about 5 seconds to turn it on. Internet

TP-Link TL-WR1043ND MultiWAN www.sharedband.com TP-Link TL-WR1043ND V3 MultiWAN Quick Install Guide Quick Install Guide