TPS PTR5100-2ZP Manuals

PTR5100-2ZP Thermostat Instructions See overleaf for further setting up information ver 1.1 Menu Settings (Part I) Menu # Switching differential Temperature calibrate Backlight turning-on time Temperature format Clock format 24 (default), 12- hour or 24-hour clock format Program time delay 01 02 03 04 05 06 07 Features description Features Explanation Adjustment 1 °C (default), 2°C........10°C -1°C = decrease 1 °C , 1 °C = increase 1 °C ... 5s , 10s , 15s ,20s (default) , 25s, 30s. 30 seconds(default) , OFF= always off C or F (press up or down button to adjust) This product should be installed by a qualified electrician. Please Note: one of the following error messages will appear if one of these problems occur: The numbers of degree difference before switching. The default is 1°C which means the thermostat will switch the heating on 0.5°C below the set temperature and will turn it off 0.5°C above the set temperature. With a 2°C differential, the heating will switch on 1°C below the set temperature and will switch off 1°C above the set temperature. This is to calibrate air temperature if required. This gives more time for user to set the programmes before reverting back to standard display This is to set the backlight turning-on time. User can also set the backlight always on or off. This alows users to select between °C or °F. 12/24 HOUR clock system selection Buttons and LCD display Buttons / Icon Description Turning on/off thermostat Menu button / Zone selection Auto/Vacation mode selection Increase the set value Decrease the set value Set the time and week days The buttons are locked. Heating is turned on Button / Icon Description Auto mode Vacation mode Temporary temperature override Frost protection activated Programmes number AUTO override Frost protection on= activated, off= deactivated This is to avoid room temperature goes below 5°C Program button Accept the set values M Zone number P AUTO WED E1, meaning the sensor for zone 1 is broken ,short-circuit , not connected or not working properly. E2, meaning the sensor for zone 2 is broken, short-circuit , not connected or not working properly. 01, 02 Temporary Press buttton t o T urn on/o f f the thermostat. When thermostat is turn ed off, the LCD will only display “OFF”. Now press and hold button for 3 seconds to bring up a configuration menu. In this mode, press button to cycle through the menus. M M P P Remarks: The thermostat will return to standby mode after 20 seconds of inactivity. (Using button will also exit the menu setting)