TRAC T10108-25 Manuals

2 pdf manual(s) TRAC T10108-25 for free download (Document Types: Installation and operating instructions manual, Manual )

TRAC T10108-25 Installation and operating instructions manual [PDF] (7 pages)

  • Identifier: id-1371053
  • Brand: TRAC
  • Device: T10108-25 Winches
  • Type: PDF
  • Key Aspects: Unpacking and Inspection Guidelines, Environmental Factors and Restrictions, Step-by-Step Assembly Procedures
  • UPD Date: 07.06.2026
  • Source File: 1356702.pdf
  • Pages: 7
  • Description: Operating instructions for the TRAC T10108-25.
Pages Preview:
  • Installation and Operating Instructions Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain this anchor winch. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Unpacking - When unpacking, inspect carefully for any damage that may have occurred du
  • Anchoring hazards. 1. Damage to the winch motor WILL occur if you motor your boat while the anchor is down (dragging the anchor will damage the winch). Tying to a cleat will extend winch life and prevent wear and possible failure. 2. Do not pull a load greater than 90 pounds. 3. If the circuit breaker halts operation of the winch during retrieval or deployment; the winch may have been overloaded, the supplied circuit breaker will auto-reset after a minute
  • 11. Place the anchor winch in position and bolt to the deck. Use fender washers and/or marine plywood under the deck to ensure the greatest strength and to spread the load. WIRING SELECTION & SPECIFICATION Do not use wire sizes smaller than 14 AWG with 105 degree C rated insulation. Using wire that is insufficient could result in overloading and a fire. The use of larger diameter wire (small gauge number) is permitted and can improve the flow of electrical
  • ANCHOR WINCH OPERATION The anchor winch is simple to operate. To lower the anchor, press and hold the button with the arrow which points DOWN. Release the button when you wish to stop letting rope out. To raise the anchor, press and hold the button with the arrow that points UP. Release the button when the anchor is docked or when you wish to stop the retrieval of the anchor. Helpful hints: 1. When the anchor seems to reach the lake or river bottom, rele
  • ANCHOR WINCH PARTS If ordering a part, provide the product model as well as the part number. PARTS LIST DESCRIPTION PART# QTY 1 Winch Cover P10108-1 1 2 Switch Assembly P10108-2 1 3 Relays P10108-3 2 4 Relay bars P10108-4 2 5 Relay Assembly P10108-5 1 6 Rope Spool P10108-6 1 7 Winch frame P10108-7 1 8 Frame support rod w/2 screws and washers P10108-8 1 9 Cover Screw Stand (SHORT) w/hardware P10108-9 2 10 Cover Screw Stand (LONG) w/hardware P10108-10 2 11 A
Document Preview & Text Transcription (Main Page)
Click to expand and read text
INSTALLATION AND OPERATING INSTRUCTIONS ANCHOR WINCHES T10108-25 Fisherman 25™ If you have any questions or difficulty installing this product, we are here to help! First READ THIS MANUAL. If you still need help, call us from 9 am to 4 pm (Central time) Monday – Friday. (615) 462-6224 Note: At this time, we provide Phone Support in English only. Visit www.TRAC-Outdoor.com to view our installation video and check out the rest of the TRAC® product line.

TRAC T10108-25 Manual  [PDF] (18 pages)

  • Identifier: id-2392250
  • Brand: TRAC
  • Device: T10108-25 Winches
  • Type: PDF
  • Key Aspects: Detailed Installation Instructions, Operational Mode Explanations, Routine Functionality Testing
  • UPD Date: 30.06.2026
  • Source File: 2412541.pdf
  • Pages: 18
  • Description: Detailed user guide for the TRAC T10108-25.
Pages Preview:
  • Якорные лебедки Опасно Указывает на возникновение ситуации, которая обязательно повлечет за собой серьезные последствия и угрозу жизни и здоровью Предупреждение Указывает на возникновение ситуации, потенциально способной принести вред здоровью и
  • 5. Проверяйте трос на изношенность или скручивания перед каждым использованием. Своевременно заменяйте изношенный нейлоновый трос, на новый трос, специально предназначенный для данной модели лебедки. Угроза удара электрическим током и возгорания 1.
  • отдачи, перегрузка может привести к повреждениям и ущербу. 1. Не размещайте посторонние предметы на бобине лебедки во время поднятия или спуска якоря. Это может запутать веревку и привести к повреждениям или проблемам в работе лебедки. 2. При работе с л
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Якорные лебедки Для электрических якорных лебедок моделей: T10108-25 Fisherman 25 T10101-25sw Salt Water Series Fisherman 25 (для соленой воды) Внимательно ознакомьтесь с данным руководством перед эксплуатацией лебедки

TRAC T10108-25: Winches Category Related Instructions

3500
Polaris 3500
07.09.2026 15 pages

-1- Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information. P/N 2879461; 2879462 WINCH 3500 AND 4500 KIT Appl Comprehensive guide for the Polaris 3500 Winches. This manual elaborates on product handling, troubleshooting, system parameters, troubleshooting guides.

PWTR Series
Prowinch PWTR Series
22.05.2026 36 pages

1 User´s Manual and Safety Warnings PWTR SERIES Operation instructions for the Prowinch PWTR Series Winches. It describes operating procedures and installation steps, diagnostic information, dimensions and layout, adjustment procedures.

PCH1000
Portable Winch PCH1000
11.08.2026 60 pages

© 2019 Portable Winch Co. - Alle Rechte vorbehalten - Gedruckt in Kanada DE EN FR Betriebs-/Sicherheitshinweise Operating/safety Instructions Consignes de fonctionnement/sécurité www.portablewinch.com PCH1000/2000 PCT1800 USER GUIDE WICHTIG: Vor Gebrauch le Advanced user manual for the Portable Winch PCH1000 Winches. This documentation provides step-by-step guidance on menu navigation, assembly reference, functional overview, warranty information.

ZEON-8
Warn ZEON-8
14.03.2026 14 pages

WARN Industries, Inc. 83479A6 ZEON-8 WINCH Part Number: 88980 Rated Line Pull: 8000 lbs. (3629 kgs) Motor: 12V DC, Series Wound Controls: Remote switch, 12’ (3.7m) Lead Gear train: 3-Stage Planetary Gear Ratio: 162:1 Clutch (Freespool): Rotating Ring Gear Br Comprehensive user handbook for the Warn ZEON-8 Winches. This guide offers instructions on component overview, product maintenance, hardware setup.