Trail Tech ENDURANCE II Manuals

BUTTON 1 BUTTON 2 BUTTON 3 Button Overview: Button 1: Increment (Up) Button 2: Decrement (Down) Button 3: Next Setting Setting Menu: To enter Endurance II set up menu, press and hold buttons 1,2, & 3 for three seconds. Make sure to press and hold all 3 buttons at the same time! Set Time Of Day: Set your clock to desired time of day using button 1 or 2. Set Distance: Select desired unit setting using button 1 or 2. (KM/H or MH) Set Tire Size: Choose your tire size using button 1 or 2. Note: To determine proper tire size see: “Taking Wheel Measurment” section on back page. Set Clock Format: Select desired clock format using button 1 or 2. (12HR or 24HR) Select Maintenance Set your maintenance value to desired time or mileage duration. Note: This value will represent either accumulated hours until maintenance or accumulated mileage until maintenance, based off previous menu selection (ART or ODO.) Reminder Interval: Select Maintenance Select desired maintenance method using button 1 or 2. ODO = Odometer, based off mileage. ART = Accumulated Ride Time, based off hours. Reminder Method: Quick Resets: • Press and hold buttons 1 & 2 for three seconds to reset DST. • Press and hold button 3 to enter DST adjustment. Use buttons 1 & 2 to increment and decrement your DST. Press button 3 to return to main screen. Screen 1: DST Screen 3: ODO • Press and hold buttons 1 & 2 to reset Max Speed. • To view time remaining until service maintenance interval icon is activated press and hold Button 3 for three seconds. • When the maintenance icon is illuminated, press and hold button 3 for three seconds to enter maintenance interval screen and then to reset maintenance interval press and hold button 1 & 2 for three seconds. Notes: 1. Wakes on external power from bike. 2. Wakes on wheel movement. 3. Wakes on button press. 4. On external power backlight shuts off after 90 seconds of inactivity. 5. After 180 seconds of inactivity only clock will be displayed. Screen 2: DST2 • Press and hold buttons 1 & 2 for three seconds to reset DST2, Ride Time, & AVG Speed. • Press and hold button 3 to enter DST2 adjustment. Use buttons 1 & 2 to increment and decrement your DST2. Press button 3 to return to main screen.

3. VEHICLE SENSORS: Refer to the sensor installation sections. You should install both the wheel sensor and vehicle power connection. Installing the power wire enables a continuous and brighter backlight. Installing the wheel sensor enables speed and distance readouts. 010-ELV-197 Tech Support: (844) 378-8143 [email protected] QUICK-START 1. POWER OVERVIEW 2. MOUNT ENDURANCE II: 5. SLEEP MODE: 4. MAINTENANCE REMINDER: Endurance II can run on the internal 3.0V watch type battery (#CR2032). Install the power wire to enable the continuous backlight. Endurance II is polarity independent and has safeguards to avoid draining the vehicle battery. See the POWER CONNECTION section for more info. Endurance II is made to be bolted to the vehicle. Use the included handlebar mounts, or refer to the manual or www.trailtech.net for other options like the CNC aluminum protector. Endurance II goes to sleep if no vehicle activity is detected. During sleep mode Endurance II uses the internal battery and will not draw down vehicle power. a. Wakes on external power b. Wakes on wheel movement c. Wakes on button press d. Backlight shuts off after 90 seconds of inactivity e. LCD shuts off and clock is displayed after 180 seconds of inactivity. Endurance II’s maintenance icon appears after the countdown gets to 0. Increase the countdown in DATA SETTING MODE. The countdown can be based on either DISTANCE or TIME, select your preference in DATA SETTING MODE. Aluminum Protector Mount (optional) Power Wire Wheel Speed Sensor (varies) Included Handlebar Mount

2000-MANUAL Tech Support: (844) 378-8143 [email protected] BUTTON 3 Next Setting BUTTON 1 Increment Up BUTTON 2 Increment Down 1. BUTTONS OVERVIEW: 2. SETTINGS MENU: 3. QUICK RESETS: To enter Endurance II set up menu, press and hold buttons 1, 2, and 3 for three seconds. Make sure to press and hold all 3 buttons at the same time! Screen 1: DST • Press and hold buttons 1 & 2 for three seconds to reset DST. • Press and hold button 3 to enter DST adjustment. Use buttons 1 & 2 to increment and decrement your DST. Press button 3 to return to main screen. Screen 2: DST2 • Press and hold buttons 1 & 2 for three seconds to reset DST2, Ride Time, & AVG Speed. • Press and hold button 3 to enter DST2 adjustment. Use buttons 1 & 2 to increment and decrement your DST2. Press button 3 to return to main screen. Screen 3: ODO • Press and hold buttons 1 & 2 to reset Max Speed. • To view time remaining until service maintenance interval icon is activated press and hold Button 3 for three seconds. • When the maintenance icon is displayed, hold button 3 for three seconds to enter maintenance interval screen (to reset, hold button 1 & 2 for three seconds.) ENDURANCE II QUICK-START GUIDE Set Distance: Select unit setting using button 1 or 2. (KM/H or M/H) Set Clock Format: Select desired clock format using button 1 or 2. (12HR or 24HR) Reminder Method: Select maintenance method. ODO = Mileage Odometer ART = Accumulated Ride Time Reminder Interval: Set interval time or mileage duration. Note: Represents either accumulated hours or mileage until maintenance, based on previous menu selection (ART or ODO.) Select Maintenance Select Maintenance Set Time Of Day: Set your clock to desired time of day using button 1 or 2. Set Tire Size: Choose your tire size using button 1 or 2. Note: To determine proper tire size see: “Wheel Sensor” installation instructions sheet.