Transition Networks E-100BTX-FX-05 Manuals

User’s Guide E-100BTX-FX-05 Stand-Alone Media Converter • Fast Ethernet • Copper to Fiber • 100Base-TX to 100Base-FX • Extended Temperature Transition Networks E-100BTX-FX-05 Fast Ethernet media converter connects 100Base- TX shielded or unshielded twisted-pair copper cable to 100Base-FX fiber-optic cable. The E- 100BTX-FX-05 series of media converters include both standard temperature models (listed below) and extended temperature model. Standard Temperature Models: 0°C to 50°C (32°F to 122°F) * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation. Installation . . . . . . . . . . . . . . . . . . . . .3 Operation . . . . . . . . . . . . . . . . . . . . .6 Cable Specifications . . . . . . . . . . . . . .8 Technical Specifications . . . . . . . . . .11 Troubleshooting . . . . . . . . . . . . . . .12 Contact Us . . . . . . . . . . . . . . . . . . .14 Compliance Information . . . . . . . . .15 Part Number Port One - Copper 100Base-TX Port Two - Duplex Fiber- 100Base-FX E-100BTX-FX-05 RJ-45 100 m (328 ft)* ST, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(SC) RJ-45 100 m (328 ft)* SC, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(LC) RJ-45 100 m (328 ft)* LC, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(MT) RJ-45 100 m (328 ft)* MT-RJ, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(SM) RJ-45 100 m (328 ft)* SC, 1310 nm single mode 20 km (12.4 miles)* E-100BTX-FX-05(SMLC) RJ-45 100 m (328 ft)* LC, 1310 nm single mode 20 km (12.4 miles)* E-100BTX-FX-05(LH) RJ-45 100 m (328 ft)* SC, 1310 nm single mode 40 km (24.9 miles)* E-100BTX-FX-05(XL) RJ-45 100 m (328 ft)* SC, 1310 nm single mode 60 km (37.3 miles)* E-100BTX-FX-05(LW) RJ-45 100 m (328 ft)* SC, 1550 nm single mode 80 km (49.7 miles)* E-100BTX-FX-05(XLW) RJ-45 100 m (328 ft)* SC, 1550 nm single mode 120 km (74.56 miles)*

USER’S GUIDE E-100BTX-FX-05 Stand-Alone Media Converter • Fast Ethernet™ • Copper to Fiber • 100Base-TX to 100Base-FX • Extended Temperature Transition Networks E-100BTX-FX-05 Fast Ethernet™ Media Converter connects 100Base-TX shielded or unshielded twisted-pair copper cable to 100Base-FX fiber-optic cable. The E-100BTX-FX-05 series of Media Converters include both standard temperature and extended temperature models. (Part numbers for the extended temperature models are listed on page 2.) Standard Temperature Models: * Typical maximum cable distance. (Actual distance is dependent upon the physical characteristics of the network installation.) Installation . . . . . . . . . . . . . . . . . .3 Operation . . . . . . . . . . . . . . . . . . .5 Cable Specifications . . . . . . . . . . .7 Technical Specifications . . . . . . . .9 Fault Isolation and Correction . .10 Contact Us . . . . . . . . . . . . . . . . .11 Compliance Information . . . . . . .12 Part Number Port One - Copper 100Base-TX Port Two - Duplex Fiber-Optic 100Base-FX E-100BTX-FX-05 RJ-45 100 m (328 ft)* ST, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(SC) RJ-45 100 m (328 ft)* SC, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(MT) RJ-45 100 m (328 ft)* MT-RJ, 1300 nm multimode 2 km (1.2 miles)* E-100BTX-FX-05(SM) RJ-45 100 m (328 ft)* SC, 1310 nm singlemode 20 km (12.4 miles)* E-100BTX-FX-05(SMLC) RJ-45 100 m (328 ft)* LC, 1310 nm singlemode 20 km (12.4 miles)* E-100BTX-FX-05(LH) RJ-45 100 m (328 ft)* SC, 1310 nm singlemode 40 km (24.9 miles)* E-100BTX-FX-05(XL) RJ-45 100 m (328 ft)* SC, 1310 nm singlemode 60 km (37.3 miles)* E-100BTX-FX-05(LW) RJ-45 100 m (328 ft)* SC, 1550 nm singlemode 80 km (49.7 miles)*

33210 Rev. R http://www.transition.com/ Page 1 of 17 E-100BTX-FX-05 User Guide Stand-Alone Media Converter • Fast Ethernet • Copper to Fiber • 100Base-TX to 100Base-FX • Extended Temperature Contents Introduction.................................................................................................................................................... 1 Standard Temperature Models ................................................................................................................. 2 Extended Temperature Models ................................................................................................................ 3 Installation ..................................................................................................................................................... 4 4-Position DIP Switch ............................................................................................................................... 4 AutoCross Jumpers .................................................................................................................................. 5 Installing the Fiber Cable .......................................................................................................................... 6 Installing the Copper Cable ...................................................................................................................... 6 Powering the media converter .................................................................................................................. 7 Operation....................................................................................................................................................... 8 Status LEDs .............................................................................................................................................. 8 Auto-Negotiation ....................................................................................................................................... 8 Pause Control ........................................................................................................................................... 8 Link Pass-Through .................................................................................................................................... 8 Far-End Fault ............................................................................................................................................ 9 Optic and Cable Specifications ............................................................................................................... 10 Cable Specifications ............................................................................................................................... 10 Contact Us................................................................................................................................................... 15 Compliance Information .............................................................................................................................. 16 Declaration of Conformity ....................................................................................................................... 16 Record of Revisions .................................................................................................................................... 17 Introduction Transition Networks E-100BTX-FX-05 Fast Ethernet media converters connect 100Base-TX shielded or unshielded twisted-pair copper cable to 100Base-FX fiber-optic cable. The E-100BTX-FX-05 series media converters include both Standard temperature models and Extended temperature models. Standard Temperature Models: media converters that can be used in a standard temperature environment from 0°C to 50°C (32°F to 122°F) Extended Temperature Models: media converters with the “HT” extension in the part number can be used in an extended temperature environment from -25°C to 65°C (-13°F to 149°F).

USER’S GUIDE E-100BTX-FX-05(10x) Stand-Alone Media Converter • Fast Ethernet • Copper to Single Fiber • 100Base-TX to 100Base-FX Transition Networks E-100BTX-FX-05(10x) Fast Ethernet Media Converter connects 100Base-TX shielded or unshielded twisted-pair copper cable to single connector 100Base-FX fiber-optic cable. Installation . . . . . . . . . . . . . . . . . .2 Operation . . . . . . . . . . . . . . . . . . .4 Cable Specifications . . . . . . . . . . .7 Technical Specifications . . . . . . . .9 Fault Isolation and Correction . .10 Contact Us . . . . . . . . . . . . . . . . .11 Compliance Information . . . . . . .12 * Typical maximum cable distance. (Actual distance is dependent upon the physical characteristics of the network.) (TX) = transmit (RX) = receive ** E-100BTX-FX-05(100) and (101) are intended to be installed in the same network where one is the local converter and the other is the remote converter. *** E-100BTX-FX-05(102) and (103) are intended to be installed in the same network where one is the local converter and the other is the remote converter. Part Number Port One - Copper Port Two - Simplex Fiber-Optic E-100BTX-FX-05(100) ** RJ-45 100 m (328 ft)* SC, 1310 nm (TX)/1550 nm (RX) singlemode, 20 km (12.4 miles)* E-100BTX-FX-05(101) ** RJ-45 100 m (328 ft)* SC, 1550 nm (TX)/1310 nm (RX) singlemode, 20 km (12.4 miles)* E-100BTX-FX-05(102) *** RJ-45 100 m (328 ft)* SC, 1310 nm (TX)/1550 nm (RX) singlemode, 40 km (24.8 miles)* E-100BTX-FX-05(103) *** RJ-45 100 m (328 ft)* SC, 1550 nm (TX)/1310 nm (RX) singlemode, 40 km (24.8 miles)*