Transition Networks SBFTF1010-130 Manuals

User’s Guide SBFTF1010-130 10/100 Fault-Tolerant Redundant Link Protector • 10/100 Base-T(x) to 10/100 Base-T(x) • Ethernet/Fast Ethernet The SBFTF1010-130 is a fault-tolerant redundant link protector provides redundant paths for fast Ethernet devices. It has three ports: main, primary, and backup. Typically, the main port connects to a critical 10/100 fast Ethernet device. The primary port and the backup port connect to two different switch ports or two different ports on separate switches. When the unit powers up, it checks the primary port for a link signal; if the signal is present, the main and primary ports connect and the signal from the backup port is then disabled. Any device connected to the backup port will not detect a signal at this time. However, if the device does not detect a signal on the primary port, then the main port and backup port connect. Product features . . . . . . . . . . . . . . . .2 Installation . . . . . . . . . . . . . . . . . . . .4 Operation . . . . . . . . . . . . . . . . . . . . .7 Cable Specifications . . . . . . . . . . . . .7 Troubleshooting . . . . . . . . . . . . . . . .8 Technical Specifications . . . . . . . . .10 Contact Us . . . . . . . . . . . . . . . . . . .11 Compliance Information . . . . . . . . .12 *Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of th network. Part Number Port One - Copper 10/100Base-T(x) Port Two Copper 10/100Base-T(x) Port Three - Copper 10/100Base-T(x) SBFTF1010-130 RJ-45 100 M (328 ft*) RJ-45 100 M (328 ft*) RJ-45 100 M (328 ft*)