Transition Networks SM8TAT2SA-DC Manuals

Transition Networks SM8TAT2SA-DC Install Guide 33814 Rev. A https://www.transition.com Page 1 of 43 SM8TAT2SA-DC Smart Managed Switch, 8-Port Gigabit PoE+, 2-Port 100/1000 SFP; DC powered Install Guide 33814 Rev. A Transition Networks SM8TAT2SA-DC Install Guide 33814 Rev. A https://www.transition.com Page 2 of 43 Safety Warnings and Cautions These products are not intended for use in life support products where failure of a product could reasonably be expected to result in death or personal injury. Anyone using this product in such an application without express written consent of an officer of Transition Networks does so at their own risk and agrees to fully indemnify Transition Networks for any damages that may result from such use or sale. Attention: this product, like all electronic products, uses semiconductors that can be damaged by ESD (electrostatic discharge). Always observe appropriate precautions when handling. NOTE: Emphasizes important information or calls your attention to related features or instructions. WARNING: Alerts you to a potential hazard that could cause personal injury. CAUTION: Alerts you to a potential hazard that could cause loss of data or damage the system or equipment. SM8TAT2SA-DC Install Guide, 33814 Rev. A Record of Revisions Rev Date Description of Changes A 5/12/20 Initial SM8TAT2SA-DC release at HW v1.01, FW v1.02.1463, and PoE FW v 208-211. Trademark notice: All trademarks and registered trademarks are the property of their respective owners. All other products or service names used in this publication are for identification purposes only and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders. Copyright restrictions: Copyright© 2020 Transition Networks, Inc. All rights reserved. No part of this work may be reproduced or used in any form or by any means (graphic, electronic, or mechanical) without written permission from Transition Networks. Address comments on this product or manual to Transition Networks Inc. | 10900 Red Circle Drive, Minnetonka, MN 55343 | tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322 | [email protected] | [email protected] | [email protected] | web: https://www.transition.com Transition Networks SM8TAT2SA-DC Install Guide 33814 Rev. A https://www.transition.com Page 3 of 43 Contents Safety Warnings and Cautions ....................................................................................................................................2 Overview .....................................................................................................................................................................5 Key Features ...............................................................................................................................................................5 Benefits .......................................................................................................................................................................5 Ordering Information .................................................................................................................................................6 Specifications ..............................................................................................................................................................6 Software Features ..................................................................................................................................................7 About This Manual .................................................................................................................................................. 11 Related Manuals ...................................................................................................................................................... 11 For More Information .............................................................................................................................................. 11 Application Example ................................................................................................................................................ 12 Front and Back Panels ............................................................................................................................................. 13 Front Panel .......................................................................................................................................................... 13 Back Panel............................................................................................................................................................ 13 LED Descriptions .................................................................................................................................................. 14 System LED ...................................................................................................................................................... 14 Mode LEDs ....................................................................................................................................................... 14 Port Status LEDs ............................................................................................................................................... 14 Mode/Reset Button ......................................................................................................................................... 16 Installation ............................................................................................................................................................... 17 Package Checklist ................................................................................................................................................ 17 Rack Mount Safety Instructions .......................................................................................................................... 17 Rack Mount Dimensions ...................................................................................................................................... 18 SM8TAT2SA-DC with Rack Mount Brackets .................................................................................................... 18 Rack Mount Brackets ....................................................................................................................................... 18 Rack Mounting ..................................................................................................................................................... 19 Wall Mounting ..................................................................................................................................................... 19 Mounting the Switch on Desk or Shelf ................................................................................................................ 20 Grounding ............................................................................................................................................................ 20 SAFETY: Equipment Using -48V DC Power Supplies ........................................................................................ 22 Ethernet Interface Connecting (RJ45 Ethernet) .................................................................................................. 23 PoE Deployment Environments A and B ............................................................................................................. 24 Ethernet Interface Connecting (Fiber, SFP) ......................................................................................................... 25 Console Connection ............................................................................................................................................. 26 Power Supply Warnings & Cautions !! .................................................................................................................... 27 Optional Power Supplies ......................................................................................................................................... 27 Power Supply Specifications ................................................................................................................................ 27 25105 Industrial DIN Rail Mounted Power Supply .............................................................................................. 28 25104 Industrial DIN Rail Mounted Power Supply .............................................................................................. 29 Power Supply Mounting Instructions .................................................................................................................. 30 Power Supply Installation .................................................................................................................................... 31 Connecting Power ............................................................................................................................................... 32 Connect Terminals to DC Power Source .......................................................................................................... 32 Transition Networks SM8TAT2SA-DC Install Guide 33814 Rev. A https://www.transition.com Page 4 of 43 Initial Switch Configuration ..................................................................................................................................... 34 Initial Switch Configuration via Web Browser ..................................................................................................... 34 Connect the Switch to Your Windows 10 PC ....................................................................................................... 36 Initial Switch Configuration via CLI ...................................................................................................................... 36 Troubleshooting ...................................................................................................................................................... 37 Troubleshooting PoE Problems ........................................................................................................................... 38 Box Label and Device Label ................................................................................................................................. 39 Record Device and System Information .............................................................................................................. 39 Contact Us ........................................................................................................................................................... 40 Compliance Information .......................................................................................................................................... 40 RoHS, WEEE, and Environmental Programs ........................................................................................................ 40 User Information ................................................................................................................................................. 40 Declaration of Conformity ................................................................................................................................... 41 Warranty .................................................................................................................................................................. 41 Limited Lifetime Warranty .................................................................................................................................. 42

SM8TAT2SA-DC Quick Start Guide 33813 Rev. B https://www.transition.com Page 1 of 2 SM8TAT2SA-DC Smart Managed 8-Port Gb PoE+, 2-Port 100/1000 SFP DC powered Ethernet Switch Quick Start Guide Caution: See the full Install Guide for important Safety Warnings & Cautions, Features, Specifications, Front & Back Panels, Mode/Reset button, Installation, Mounting, Connection, Grounding, Optional Power Supply, Power Connection, Initial Switch Configuration, Troubleshooting, and Warranty information. Overview: The SM8TAT2SA-DC managed GbE PoE+ switch offers powerful L2 features with better functionality and usability. It delivers 8 (10M/100M/1G) RJ45 with 8 PoE+ (supports 802.3 at/af and total up to 130W) ports and 2 GbE SFP ports. This DC-powered switch provides a cost-effective solution for power and data connectivity in a Service provider environment with 48-54 VDC input. System LED: Indicates if the switch is powered up correctly or if a system alarm is triggered. Mode LEDs: Indicate the mode of all switch ports. Press the Mode/Reset button sequentially to switch between Link/Activity/Speed mode and PoE mode. Port Status LEDs: Indicate the current status of each port in different modes after changing the mode by pressing Mode/Reset button. Press the Mode/Reset button for less than 2 seconds to change LED modes (Link/Act/Speed Mode or PoE Mode). Mode/Reset button: Change LED Mode: press for 0 ~ 2 seconds; the SYS LED is lit green; Port LED status changes based on the mode selected. Reset Switch: press for 2 ~ 7 seconds; the SYS LED blinks green; Port LEDs are all Off. Restore to Defaults: press for 7 ~ 12 seconds; the SYS LED blinks green; Port LEDs are all On. Once the LED behaviors are correctly displayed, release the button. Press the Mode/Reset button until all port LEDs light, then release the Mode/Reset button. This sets the switch back to its factory default IP address; log back in to display the First Time Wizard. Package Contents: Verify that the box contains one Switch, two Rack Mount brackets, four rubber feet, one this manual, and one documentation postcard. 19’’Rack Mounting: 1. Attach the mounting brackets to both sides of the chassis. Insert screws and tighten then with a screwdriver to secure the brackets. 2. Place the switch in the rack. Align the oval holes in the brackets with the mounting holes in the rack posts. 3. Attach the brackets to the posts. Insert screws and tighten them. Wall Mounting: 1. Install user-supplied screws on the appropriate location on the wall and note the dimensional limitation of the screws. 2. Make sure that the switch is attached securely to wall. Desk or Shelf Mounting: 1. Verify the workbench is sturdy and reliably grounded. 2. Attach the four adhesive- backed rubber feet to the bottom of the switch. Grounding: After the switch is mounted and connected, the back panel grounding screw can be used for grounding. Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface before connecting devices. ATTENTION: This SM8TAT2SA-DC case must be earth grounded for correct operation of internal transient protection circuitry. See the Install Guide for important Cautions and Warnings regarding Switch and Power Supply grounding. Transition Networks SM8TAT2SA-DC Quick Start Guide 33813 Rev. B https://www.transition.com Page 2 of 2 Neither DC input polarity may be earth grounded. If DC power distribution bus has one side tied to earth ground, then use of an isolated DC-DC power Supply between the DC power distribution bus and SM8TAT2SA-DC is required to ensure that the PoE ports are isolated from earth ground as required by IEEE802.3af/at/bt specification. If it is not possible to use an isolated DC-DC power supply then all interconnected devices must be bonded to a common earth ground with all connection points within the same building. See the Install Guide. Ethernet Interface Connection (RJ45 Ethernet): The switch has RJ45 and optical (mini-GBIC) electrical interfaces. To connect the switch to a PC use a straight-thru or a crossover Ethernet cable. Connect the switch to an Ethernet device with UTP or STP Ethernet cables. Ethernet Interface Connection (Fiber, SFP): For a 100 Mbps fiber port, prepare the LC connectors or SC connectors (using an optional SC-to-LC adapter). For the 1000 Mbps fiber ports, use mini-GBIC SFPs. These accept plug in fiber transceivers that typically have an LC style connector, with MM, SM, long-haul or special-application transceivers. Warning: Do not view optical connectors. Console Connection: is for local management by using a terminal emulator or a computer with terminal emulation software. Setup: DB9 connector connect to computer COM port. Baud rate: 115200bps. 8 Data bits, 1 Stop bit. Priority: None. Flow control: None. To connect the host PC to the console port, use a male RJ45 connector-to-RS232 DB9 (female) connector cable. Connect the RJ45 connector of the cable to the Console port of the switch. Connect the DB9 connector of the cable to the PC COM port. Power Connection Warning: Connect the power supply to the switch first while powered off, and then connect the power supply to power. Power Supplies: Various power supply models are available from Transition Networks. Warning: Use an isolated power supply in order for Transition Networks to honor the switch warranty. Available Transition Networks power supplies: PS 25105 and PS 25104. See the Install Guide. Connecting Power: Switch input is 48 - 54VDC or negative 48 - 54VDC. To get full PoE output and meet the IEEE 802.3at standard, the input range must be 52-54VDC or negative 52-54VDC. Insert the positive and negative wires into + and - contacts on the terminal block and tighten the wireclamp screws. See the Install Guide. Initial Switch Config via Web Browser: Initially reconfigure your PC IP address / subnet mask for the PC to communicate with the switch. After changing PCs IP address, access the Web UI of the switch using the switch default IP address. The factory default Username and Password are both admin. On first switch power up, a First Time Wizard displays. See the Web User Guide. Initial Switch Config via CLI: Access the Command Line Interface via telnet or SSH. See the CLI Reference. For Transition Networks Drivers, Firmware, etc. go to the Product Support webpage (logon required). For Manuals, Data Sheets, etc. go to the Support Library (no logon required). Contact Us: US and Canada: 1‐800‐260‐1312 | toll free: 1.800.526.9267 | fax: 952.941.2322 | [email protected] | [email protected] | [email protected] | Transition Networks | 10900 Red Circle Drive | Minnetonka, MN 55343, U.S.A.