Treasure Garden AKZ13 Manuals

AKZ13 13’OC Cantilever Assembly and Operation Guide Thank you for your purchase of Treasure Garden’s AKZ13 Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your AKZ13, read and follow this assembly and operation guide We recommend a two-person team for assembly and disassembly. Save information for future reference. 1 G F B I J Base frame Base cover Base Parts Boxed Separately Add-on weights (4) A D E H M K C L Loop Lock Spring Loaded Rib End Cap (8) A - Base Cover, Frame and Add-on Weights H - Tilt Degree Scale B - 360° Rotating Hub I - Canopy Support Beam C - Base Pedal J - Canopy - Double Wind Vent D - Crank Lift Handle K - Valance (optional) E - Main Frame Stand L - Vega™ Light Adapter (light sold F - Main Frame Grip separtely) G - Tilt Lever M - Spring Loaded Rib End Cap AKZ13 CHECKLIST 2 REQUIRED FOR ASSEMBLY: • 400 lbs. playground sand (not included). IMPORTANT:Prior to assembly it is important to decide on the location of the AKZ13 umbrella. The umbrella measures approximately 10 ft. in height and 13 ft. in width. • Allow ample height to avoid damage to your umbrella during assembly and usage. • Choose a location that is level and sturdy. • Avoid any sloping or soft ground. • Consider a location that will maximize the umbrella’s rotating swivel function. Placing the AKZ13 between two entertaining areas is ideal. NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any packaging or box until assembly is complete. 1 Base Cover 1 2 Steel Base Frame 1 3 Add-On Weight Containers 4 4 Feet 4 5 Screws 4 6 Wrench 1 7 Bolts 5 8 Washers 5 9 Medium Hexagon Wrench 1 10 Playground Sand (not included) 400 lbs. 11 AKZ13 Main Frame 1 12 Large Hexagon Wrench 1 13 Crank Lift Handle 1 14 Small Hexagon Wrench 1 AKZ13 PART LIST Part Description Qty. 3 CAUTION: Fully assembled, the AKZ13 umbrella weighs over 500 lbs. Moving the umbrella fully assembled will increase the risk of damage to your umbrella and/or can cause serious injury. We recommend a two-person team for assembly and disassembly. Lg. Hexagon Wrench Med. Hex. Wrench Rotating Hub Main Frame (Fig. 1) (Fig. 3) (Fig. 4) (Fig. 5) (Fig. 6) S T E P 1 Base Assembly Select area to set base frame and place in desired location. NOTE: Moving the umbrella will be difficult once fully assembled. Remove rotating hub from the main frame by removing the (2) bolts and (2) washers (Fig. 1), set aside bolts and washers for later use in step 2. Screw (4) feet onto bottom of base frame with supplied (4) screws (Fig. 2). Now, place rotating hub onto base frame and secure with supplied (5) bolts & (5) washers (Fig. 3). Remove caps from each add-on weight container and fill with dry playground sand (Fig. 4). The AKZ13 base containers hold up to 400 lbs. of sand. IMPORTANT: When filling the containers, it is necessary to wet down the sand after partial filling. After wet down, fill each add-on weight with remaining sand. Place each add-on weight container into base frame sections (Fig. 5). Carefully place base cover onto base frame (Fig. 6). LEVELING: If needed, adjust frame corners using supplied wrench until frame is level (Fig. 7). (Fig. 7) (Fig. 2)

AKZ13/AKZRT 13’OC/10’x13’RT Cantilever Assembly and Operation Guide 8 Thank you for purchasing Treasure Garden’s AKZ Cantilever Umbrella. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella, read and follow this assembly and operation guide. We recommend a two-person team for assembly and disassembly. Save information for future reference. 1 E F H I C D G L K J Loop Lock Spring Loaded Rib End Cap (8) A B A - 360° Rotating Hub G - Tilt Degree Scale B - Foot Pedal H - Canopy Support Beam C - Crank Lift Handle I - Canopy - Single or Double Wind Vent D - Main Frame Stand J - Light Adapter (light sold separately) E - Tilt Lever K - Valance (optional) F - Main Frame Grip L - Spring Loaded Rib End Cap CHECKLIST 2 CAUTION: Fully assembled, the umbrella weighs over 500 lbs. Moving the umbrella fully assembled will increase the risk of damage to your umbrella and/or can cause serious injury. We recommend a two-person team for assembly and disassembly. IMPORTANT: Prior to assembly it is important to decide on the location of the umbrella. • Allow ample height to avoid damage to your umbrella during assembly and usage. • Choose a location that is level and sturdy. • Avoid any sloping or soft ground. • Consider a location that will maximize the umbrella’s rotating swivel function. Placing the umbrella between two entertaining areas is ideal. Storage: • Properly store umbrella when not in use. Close umbrella, tie string around canopy and cover umbrella with provided protective cover. NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any packaging or box until assembly is complete. 1 AKZ Main Frame 1 2 Crank Lift Handle 1 3 Hub Bolts 5 4 Washers 5 5 8mm Hexagon Wrench 1 6 6mm Hexagon Wrench 1 7 2.5mm Hexagon Wrench 1 AKZ PART LIST Part Description Qty.