TRU Audio SB-SLIM-44P Manuals

User Manual SB-SLIM-44P Contents: (1) Soundbar (1) Cloth-Wrapped Grill (1) Wall Mount Bar (2) Wall Mount Blocks with leveling screws (8) Rubber Pads (1) TruAudio Logo Badge Description The SB-SLIM-44P soundbar was designed to work great with most flat or curved screen TV’s. Our patent-pending wire pass-through design makes terminating the soundbar a breeze. The thin-profile aluminum enclosure not only provides the soundbar with a luxurious look and feel, but also guarantees its durability. Because of the 3-channel design they are perfect for a discrete 5.1 system. The SB-SLIM-44P offers a modern design and innovative mounting features. Installation The soundbar can be mounted using the included wall mount bracket, or mounted directly to the TV using the optional SB-CUSTOM-TVB mounting bracket. Using the (included) Wall Mount Mount the wall mount bar to the wall using appropriate screws. Make sure the bar is installed level with the TV. When installed, the top of the soundbar will sit approximately 3/8” (10mm) higher than the top edge of the wall mount bar. The bottom of the soundbar will be approximately 5.75” (146mm) below the top edge of the wall mount bar. Place one wall mount block on either side of the bar, making sure the set screw is centered in the block prior to placing it on the bar. Each block should be placed in the recess just to the outside of the mounting screw for that side of the bar. The soundbar will rest on these blocks when installed and a wider placement gives the soundbar more stability. Placing the blocks too far from the mounting screws may allow the bar to bend. Place the soundbar on the wall mount, taking care to not disturb the wall mount blocks. It may be necessary to level the soundbar slightly if mounted very close to the TV. If so, remove the soundbar from the mount and adjust the set screws in the blocks. Screwing the set screw further into the block will raise that side of the soundbar slightly. slightly. You should only adjust the set screw a maximum of 1/16” (1.5mm), and should never unscrew the set screw, as that could make the soundbar unstable on the mount. Wall Mount Block Set Screw Wall Mount Block Mounting Screw Wall Mount Block Wall Mount Bar Mounting Screw