Tru-Test Series 2000 Manuals

OFF ON C E RECORDED HOLD LIVE MAX AUTO ZERO MIN FINE MODE TOTAL COUNT AVERAGE CLEAR STATS HOLD WEIGHT ZERO RECORD ESCAPE UNDO RECORD POWER LOADCELLS INSTALLATION Your Tru-Test indicator is supplied fully installed and calibrated for your Giltrap silage wagon. The internal battery is charged and ready to use, or you may wish to connect the power cable semi-permanently by installing a plug at the back of your tractor. Congratulations if you have purchased this Tru-Test Series 2000 scale Indicator with your Giltrap silage wagon.To ensure you receive maximum benefit from owning a weighing system, please pay careful attention to the following instructions. USER GUIDE Power connector for connecting 12 V vehicle battery (red clip to positive terminal) or Tru-Test power adaptor. Connection to a 12V vehicle battery will charge the internal battery in the indicator. BASIC WEIGHING 1 Press and wait for display. 2 Load the silage wagon with the first feed product. 3 Wait for stable light . 4 Note the weight before continuing to load, or commence feeding out when the wagon is loaded satisfactorily. C E Loadcell connectors. Use either connection for the silage wagon load cells. Dust caps screw together to keep out dirt and moisture when cables are connected to Indicator. Screw back on Indicator/cables when cables removed. ® ON