True Fitness TA1H-1S Manuals

Specifi cations subject to change without notice. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). ROUGH-IN DATA 2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com Model: TRUE FOOD SERVICE EQUIPMENT, INC. Project Name: Location: Item #: Qty: Model #: AIA # SIS # Printed in U.S.A. APPROVALS: AVAILABLE AT: TRUE REFRIGERATION MADE IN SINCE 1945 U.S.A. .S.A. TM U.S.A. TA1H-1S TA1H-1S 6/07 Provides cabinet holding temperature of 80°F to 180°F (26.6˚C to 82.2˚C). Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. Two (2) stainless steel (for corrosion resistance), fi nned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts. 300 series stainless steel exterior front, sides, back and bottom. The very fi nest stainless with higher tensile strength for fewer dents and scratches. Anodized aluminum interior cabinet liner. 300 series stainless steel door liner and fl oor with coved corners. Three (3) adjustable, heavy duty chrome plated wire shelves. Positive seal self-closing door with 120° stay open feature. Lifetime guaranteed door hinges and recessed door handle. Entire cabinet structure and solid door are foamed-in-place using high density, CFC free, polyurethane insulation. R TA Specifi cation Series: Reach-In Solid Door Heated Cabinet ® Model Doors Capacity (Cu. Ft.) (liters) Cabinet Dimensions (inches) (mm) L D† H* Watts Voltage NEMA Confi g. Cord Length (total ft.) (total m) Crated Weight (lbs.) (kg) TA1H-1S 1 31 878 29 737 345/8 880 781/4 1988 2000 115/208-240/1 14-20P 9 2.74 350 159 † Depth does not include 11/8" (29 mm) for system mechanical components. * Height does not include 61/8" (156 mm) for legs, 5" (127 mm) for optional castors and 1" (26 mm) for system mechanical components. Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit. STANDARD FEATURES Model: TRUE FOOD SERVICE EQUIPMENT 2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com WARRANTY One year warranty on all parts & labor (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Front Side Plan 3D PLAN VIEW TA1H-1S TFQY179E TFQY179S TFQX60P TFQY1793 TA1H-1S DESIGN • True’s solid door reach-in heated cabinets are designed with enduring quality that protects your long term investment. HEATER SYSTEM • Cabinet is designed to provide holding temperatures of 80°F to 180°F (26.6°C to 82.2°C). Heating system controlled by exterior on/off switch and temperature control dial. • Two (2) stainless steel (for corrosion resistance), fi nned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts. • Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. • Manually controlled vent located on top of the cabinet for positive humidity control. • 12" x 20" (305 mm x 508 mm) pan for water included, if additional humidity is required. CABINET CONSTRUCTION • Exterior - 300 series stainless steel door, front, sides, back and bottom. • Interior - NSF approved anodized aluminum side walls and back liner. 300 series stainless fl oor with coved corners. • Insulation - entire cabinet structure and solid door are foamed-in-place using high density, CFC free, polyurethane insulation. • Welded, heavy duty galvanized frame rail dipped in rust inhibiting enamel paint for corrosion protection inside and out. • Frame rail fi tted with 6" (153 mm) stainless steel legs. DOOR • 300 series stainless steel exterior and liner. Door opens within cabinet dimension. • Door lock standard. • Lifetime guaranteed recessed door handle. Door fi tted with 12" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment. • Positive seal self-closing door with 120° stay open feature. Lifetime guaranteed door hinges. • Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. SHELVING • Three (3) chrome shelves 25" x 273/4" (635 mm x 705 mm) with shelf clips and wall mounted pilasters (fi eld installed). 11/16" (27 mm) standoff ensures optimum airfl ow. • Aluminum shelf support pilasters. Shelves are adjustable on 1/2" (13 mm) increments. • Three (3) different interior kits available (see Kit Options). Pilasters and tray slides require fi eld installation. LIGHTING • Incandescent interior lighting - lights activated by exterior on/off switch, safety shielded. MODEL FEATURES • Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. • Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. • NSF-4 compliant for open food product. ELECTRICAL • True requires that a sole use circuit be dedicated for the unit. • Unit completely pre-wired at factory and ready for fi nal connection to a 115/208-240/60 Hz. single phase - 20 amp dedicated outlet. Cord and plug set included. OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply. ❒ 6" (153 mm) seismic/fl anged legs. ❒ 4" (102 mm) diameter stem castors. ❒ Stainless steel rail skirt for use with legs (fi eld installed). ❒ Additional shelves. ❒ Stainless steel (electro polished) shelves. ❒ Metal door handle (factory installed). ❒ Electronic temperature control (factory installed). ❒ Correctional facilities options. ❒ Curb mountable units. KIT OPTIONS Upcharge applies. Lead time may apply. ❒ Kit #1: Nine (9) sets of #1 type tray slides and pilasters (fi eld installed), bottom support of one (1) 18"L x 26"D (458 mm x 661 mm) pan or two (2) 14"L x 18"D (356 mm x 458 mm) pans. ❒ Kit #2: One (1) set half-section #2 steel rod tray slides and pilasters (fi eld installed), rim support of one (1) 18"L x 26"D (458 mm x 661 mm) pan. ❒ Kit #3: Six (6) sets of universal type tray slides and pilasters (fi eld installed), bottom support of one (1) 18"L x 26"D (458 mm x 661 mm) pan, two (2) 14"L x 18"D (356 mm x 458 mm) pans or two (2) 12"L x 20"D (305 mm x 508 mm) pans. ❒ Additional kit option components available individually. 115/208-240/1 NEMA-14-20R TA Specifi cation Series: Reach-In Solid Door Heated Cabinet ELEVATION PLAN VIEW 77" (1958 mm) 783/16" (1986 mm) 29" (737 mm) 345/8" (880 mm) 2623/32" (679 mm) 6111/32" (1559 mm) 61/16" (154 mm) 851/4" (2166 mm) 13/16" (31 mm) 1" (26 mm) 3521/32" (906 mm) 11/32" (27 mm)

FEATURES/BENEFITS TA2H-2S TA1H-1S TA2HPT-2S-2S True Heated Cabinets are designed to hold warm baked or cooked food. Cabinets are not designed to heat ambient or cold product. Parts Department • 1-800-424-TRUE True Website: www.truemfg.com Toll Free Number • 1-800-325-6152 TA Series • Powerfully provides holding tempera- tures of 80°F to 180°F throughout the cabinet for uniform, forced-air, heating. • Low velocity fan(s) provided to assure even temperature throughout cabinet. A vent is located at the top of the cabinet for positive humidity control. • Heater - stainless steel for corrosion resistance. • Shelving - (3) heavy duty, chrome shelves per section with wall mounted pilasters (3) different interior kits available. (field installation required). • Exterior - 300 series stainless steel front, sides, bottom and back (the fin- est stainless available). • Anodized aluminum interior. • Foamed-in-place polyurethane high den- sity cell insulation (CFC free). • Exterior mounted, color coded, tempera- ture monitor. • Lifetime guaranteed recessed door handles standard. • Door locks standard. • Doors equipped with lifetime guaranteed self-closing hinges with 90 degree stay open feature standard. • Humidity control - 12” x 20” pan stan- dard. • Manual humidity control is a standard feature (turn counterclockwise to ventilate). • Incandescent interior lighting. • 6” legs standard equipment. 4” diameter swivel castors available for single section models only. • Pass-thru heated cabinet designed to be rear-loaded from prep area and front accessed. • Self-contained system. * Height does not include 6” for leg height or 5” for optional castors (castors available on single section models only). * Height does not include 1” for system mechanical components. ‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit. note: TA2HPT-2S-2S requires hard wiring. * Height does not include 6” for leg height or 5” for optional castors (castors available on single section models only). * Height does not include 1” for system mechanical components. ‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit. note: TA2H-2S requires hard wiring. Pass-Thru Heated Cabinets Model Swing Doors Cu. Ft. Watts Crated Weight Cabinet Dimensions L D H* SOLID DOORS TA1HPT-1S-1S ‡ 2 31 2000 400 29 x 371/4 x 781/4 TA2HPT-2S-2S ‡ 4 56 4000 600 513/8 x 371/4 x 781/4 All dimensions rounded up to the nearest 1/8”. Reach-In Heated Cabinets Model Swing Doors Cu. Ft. Watts Crated Weight Cabinet Dimensions L D H* SOLID DOORS TA1H-1S ‡ 1 31 2000 350 29 x 343/4 x 781/4 TA2H-2S ‡ 2 56 4000 565 513/8 x 343/4 x 781/4 All dimensions rounded up to the nearest 1/8”. Curb mountable units for TR, TA & TG series only. (5% list upcharge)