TypeHaus Secure Check Box Manuals

1 pdf manual(s) TypeHaus Secure Check Box for free download (Document Types: Installation manual)

TypeHaus Secure Check Box Installation manual [PDF] (2 pages)

  • Identifier: id-1649730
  • Brand: TypeHaus
  • Device: Secure Check Box Printer
  • Type: PDF
  • Key Aspects: Common Issue Diagnostic Flows, FAQ Section for Common Queries, Unpacking and Inspection Guidelines
  • UPD Date: 02.04.2026
  • Source File: 1668999.pdf
  • Pages: 2
  • Description: Owner’s manual for the TypeHaus Secure Check Box.
Pages Preview:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
www.typehaus.com 760.334.3555 SUPPORT LINE 11B548-00 Secure Check Box TM SECURE CARD SLOT INPUT OUTPUT STATUS LED POWER SUPPLY POWER LED Check Box TM SECURE CARD SLOT STATUS LED POWER LED Before installing the CheckBox™, follow the printer manufacturer’s instructions for installing the printer on the network. Confirm that the system that will be used for printing can print to the printer before the CheckBox is installed. Each printer model is unique. The printer manufacturer’s instructions, web site, and customer support always provide the best printer installation assistance prior to installing the CheckBox. The CheckBox requires that PCL5/5e commands be used for printing. Depending upon how your application works, be sure the application is configured to use PCL5/5e when printing. Every application has its own unique configuration settings. Applications can also vary depending upon the type of computer on which they are running. 1 Preparing for Success TypeHaus | 760.334.3555 | www.typehaus.com Be sure to install and test the printer on the network before proceeding. Power on the laser printer and wait for ready/online status. 2 Installing the CheckBox Detach the Ethernet network cable from the printer and attach it to the “Input from Host” port on the CheckBox. 3 Attach the supplied 3 foot Ethernet cable to the printer’s Ethernet port (the same port from which the network cable was detached in the previous step). 4 Attach the other end of the supplied 3 foot Ethernet cable to the “Output to Printer” port on the CheckBox. 5 Use only the included power supply. Using another power supply will void the warranty. WARNING Plug the supplied 5 volt power supply into a 110 volt outlet. It is preferable, but not required, to plug it into the same power strip as the printer. See WARNING box on this page. 6 Insert the round power supply connector into the CheckBox “Power Supply” port. The CheckBox Power LED will light green (possibly after blinking orange), then the Status LED will light green. 7 Insert the CheckBox’s memory card to enable printing of the secured resources. 8 Secure Check Box TM Installation Guide Ethernet Connected Laser Check Printing Device