U-Line H-9466 Manuals

PAGE 1 OF 9 0721 IH-9466 SMOKE DETECTOR, 10-YEAR LITHIUM BATTERY 1-800-295-5510 uline.com H-9466 NOTE: This smoke detector was designed to be mounted on the ceiling or wall. It is not a tabletop device. CAUTION! Do not connect this unit to any other detector or auxiliary device. It is a single- station unit that cannot be linked to other devices. Connecting anything else to this unit may prevent it from working properly. CAUTION! Do not install this unit over an electrical junction box. Air currents around junction boxes can prevent smoke from reaching the sensing chamber and prevent the unit from alarming. Only AC-powered units are intended for installation over junction boxes. Place the bracket on the wall or ceiling where detector will be mounted. 1. If locking the battery compartment or locking the smoke detector to the mounting bracket, please read the "Locking Feature (Optional)" section. 2. Hold base firmly and twist the mounting bracket counterclockwise to separate it from the unit. (See Figure 1) 3. Hold the mounting bracket against the ceiling or wall and trace around the inside of the mounting slots. (See Figure 1) Mounting Bracket Mounting Slots Figure 1 4. Use a pencil to make a mark inside each outline for the drill holes. 5. Set the unit where it won't get covered with dust when drilling the mounting holes. 6. Using a 3/16" drill bit, drill a hole through each pencil mark. 7. Insert the plastic screw anchors (included) into the holes. Tap the screw anchors gently with a hammer, if necessary, until they are flush with the ceiling or wall. INSTALLATION TOOLS NEEDED Pencil Hammer Drill 3/16" Drill Bit Flathead Screwdriver Para Español, vea páginas 4-6. Pour le français, consulter les pages 7-9.