Ubiquiti AMO-5G13 Manuals

3 GHz 2x2 Dual Polarity MIMO Omni Antenna Model: AMO-3G12 Introduction Thank you for purchasing the Ubiquiti Networks™ airMAX™ 3 GHz 2x2 Dual Polarity MIMO Omni Antenna. This Quick Start Guide is designed to guide you through the installation of the antenna. This Quick Start Guide also includes the warranty terms and is for use with the airMAX Omni Antenna, model AMO-3G12. Package Contents Antenna Pole Clamps (Qty. 2) Carriage Bolts (M8x120, Qty. 4) 3 GHz 2x2 Dual Polarity MIMO Omni Antenna Model: AMO-3G12 Serrated Flange Nuts (M8, Qty. 4) RF Cables (Qty. 2) Quick Start Guide Products may be different from pictures and are subject to change without notice. TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Installation Requirements • RocketM3/M3 GPS or RocketM365/M365 GPS (sold separately) • 13 mm wrench • Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable Hardware Installation 1. Attach the RF Cables to the connectors labeled Chain 0 and Chain 1 on the RocketM.

5 GHz 2x2 Dual Polarity MIMO Omni Antenna Model: AMO-5G13 Introduction Thank you for purchasing the Ubiquiti Networks™ airMAX™ 5 GHz 2x2 Dual Polarity MIMO Omni Antenna. This Quick Start Guide is designed to guide you through the installation of the antenna. This Quick Start Guide also includes the warranty terms and is for use with the airMAX Omni Antenna, model AMO-5G13. Package Contents Antenna Pole Clamps (Qty. 2) Carriage Bolts (M8x100, Qty. 4) 5 GHz 2x2 Dual Polarity MIMO Omni Antenna Model: AMO-5G13 Serrated Flange Nuts (M8, Qty. 4) RF Cables (Qty. 2) Quick Start Guide Products may be different from pictures and are subject to change without notice. TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Installation Requirements • RocketM5 or RocketM5 GPS (sold separately) • 13 mm wrench • Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable Hardware Installation 1. Attach the RF Cables to the connectors labeled Chain 0 and Chain 1 on the RocketM.

Omni 5 GHz 2x2 Dual Polarity MIMO Omni Antenna Model: AMO-5G13 1 Introduction Introduction Thank you for purchasing the Ubiquiti Networks airMAX™ 5 GHz 2x2 Dual Polarity MIMO Omni Antenna, model: AMO-5G13. This Quick Start Guide is designed to walk you through the installation of the antenna. Package Contents 5 GHz 2x2 Dual Polarity MIMO Omni Antenna Model: AMO-5G13 Antenna Quick Start Guide Pole Clamps (Qty. 2) M8x120 Carriage Bolts (Qty. 4) M8 Serrated Flange Nuts (Qty. 4) RF Cables (Qty. 2) * Products may be different from pictures and are subject to change without notice. Installation Requirements •� RocketM5 or RocketM5 GPS (sold separately) •� 13 mm wrench •� Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from the most brutal environments and devastating ESD attacks with industrial-grade shielded Ethernet cable from Ubiquiti Networks™. For more details, visit www.ubnt.com/toughcable 2 airMAX™ AMO-5G13 Quick Start Guide Hardware Installation 1. Attach the RF Cables to the connectors labeled Chain 0 and Chain 1 on the RocketM. 2. Attach the RocketM to the antenna. a. Align the mounting tabs on the back of the RocketM with the Rocket mounting bracket. b. Slide the RocketM down to lock it into place.

AMO-5G13 Quick Start Guide https://dl.ubnt.com/qsg/AMO-5G13/AMO-5G13_EN.html[2/10/2020 11:02:06 AM] Antenna Pole Clamps (Qty. 2) Carriage Bolts (Qty. 4) Serrated Flange Nuts (Qty. 4) RF Cables (Qty. 2) Package Contents Installation Requirements Rocket®M5 or RocketM5 GPS (sold separately) 13 mm wrench Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable Hardware Installation 1. AMO-5G13 Quick Start Guide AMO-5G13 Quick Start Guide https://dl.ubnt.com/qsg/AMO-5G13/AMO-5G13_EN.html[2/10/2020 11:02:06 AM] 2. AMO-5G13 Quick Start Guide https://dl.ubnt.com/qsg/AMO-5G13/AMO-5G13_EN.html[2/10/2020 11:02:06 AM] 3. AMO-5G13 Quick Start Guide https://dl.ubnt.com/qsg/AMO-5G13/AMO-5G13_EN.html[2/10/2020 11:02:06 AM] 4.