Ubiquiti PowerBeam AC Gen2 Manuals
1 pdf manual(s) Ubiquiti PowerBeam AC Gen2 for free download (Document Types: Quick start manual)
Ubiquiti PowerBeam AC Gen2 Quick start manual [PDF] (22 pages)
- Identifier: id-2423347
- Brand: Ubiquiti
- Device: PowerBeam AC Gen2 Network Hardware
- Type: PDF
- Key Aspects: Cleaning and Sanitization Methods, Documentation and Revision History, Step-by-Step Assembly Procedures
- UPD Date: 14.05.2026
- Source File: 2381419.pdf
- Pages: 22
- Description: Essential instructions for the Ubiquiti PowerBeam AC Gen2.
![PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
Installation Requirements
13 mm wrench
Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-
grade, shielded Ethernet c](https://cdn4.sc-journal.com/images/pdf-pages/2381/2381419/2.png)
![PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
Ethernet
Reset Button
Release Button
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is powered on. Alternatively,
the device may be reset remotely via a Reset button located on the bot](https://cdn4.sc-journal.com/images/pdf-pages/2381/2381419/3.png)
![PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
Signal
Ethernet
Power
In airOS®, you can modify the threshold value for the wireless signal strength LEDs on the Wireless tab under Signal LED Thresholds.
Each LED will light when the wireless signal strength is equal to or greater than the LED’s threshold value. The default threshold
values for these LEDs are shown below:
The Ethernet LED will](https://cdn4.sc-journal.com/images/pdf-pages/2381/2381419/4.png)
![PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
The PowerBeam mounted outdoors without the Dish Reflector installed provides outdoor-to-indoor coverage using the 3 dBi Antenna
Feed only.
Installation
1.](https://cdn4.sc-journal.com/images/pdf-pages/2381/2381419/5.png)
![PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
2.](https://cdn4.sc-journal.com/images/pdf-pages/2381/2381419/6.png)
Click to expand and read text
PBE-5AC-Gen2 Quick Start Guide https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM] Dish Reflector Antenna Feed Rear Housing Mounting Bracket Hex Bolts with Washers (Qty. 4) Pole Clamp Carriage Bolts (Qty. 2) Flange Nuts (Qty. 2) Gigabit PoE (24V, 0.5A) with Mounting Bracket Power Cord Package Contents PBE-5AC-Gen2 Quick Start Guide × 5 GHz High-Performance airMAX® AC Bridge Model: PBE-5AC-Gen2 Table of Contents Package Contents Installation Requirements Hardware Overview Application Examples Installation Accessing airOS via Wi-Fi Installer Compliance Responsibility Specifications Safety Notices Electrical Safety Information Limited Warranty Compliance Declaration of Conformity Online Resources
PowerBeam AC Gen2: Related Instructions
mFi Power Strip Model: mPower Full technical guide for the Ubiquiti mPower Power Strip. This guide explains the features and interface navigation, cleaning instructions, device overview.
Maintenance and service manual for the Ubiquiti Uni-fi AP Wireless Access Point. This guide describes features and troubleshooting tips, device instructions, hardware setup, network setup.
11 GHz FDD Licensed Backhaul Radio Model: AF-11FX Operating and setup manual for the Ubiquiti airFiber 11FX Radio. The guide explains operation and shutdown procedures, operating conditions, performance details, wiring setup.
UniFi Switch Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord Rubber Feet (Qty. 4) Package Contents S Advanced user guide for the Ubiquiti UniFi USW-Pro-48-POE Switch. It explains installation, setup, and service instructions, system setup, safety information, daily usage.
In-Wall Wi-Fi Access Point Model: UAP-IW Comprehensive setup guide for the Ubiquiti UAP-IW Wireless Access Point. The manual outlines system configuration and power requirements, diagnostic information, operational safety, device instructions.
2.4 GHz airMAX® ac BaseStation Radio with Dedicated Wi-Fi Management Model: R2AC Product manual for the Ubiquiti ROCKET 2AC PRISM Radio. This manual covers installation, operation, and maintenance guidelines, safety guidelines, software installation.
Similar Manuals in the Network Hardware Category
Rev. 1.2 Setup and usage guide for the Vivotek VS8801 Network Hardware. The manual contains instructions for maintenance guidelines, technical specifications, software installation, operational safety.
5 GHz airMAX® ac Bridge with 300 mm RF Isolated Reflector Model: PBE-5AC-300-ISO Step-by-step user manual for the Ubiquiti PBE-5AC-300-ISO Network Hardware. It provides guidance on installation support, power requirements, configuration options, user instructions.
Practical user guide for the Juniper SRX 5600 Gateway. This guide provides information on technical guidelines, support details, functional overview.
PLANET Fiber Transceiver MFB-Series / MGB-Series / MTB-Series User’s Manual Professional operation guide for the Planet MFB-Series Transceiver. It details operating modes and performance optimization, safety precautions, firmware updates.