Ubiquiti UniFi UAP-IW Manuals

Carrier Class airMAX® BaseStation Models: M900/M2/M3/M365/M5/M6 Introduction Thank you for purchasing the Ubiquiti Networks® Rocket®. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents Rocket Metal Strap PoE Adapter (24V, 1A) Carrier Class airMAX® BaseStation Models: M900/M2/M3/M365/M5/M6 Power Cord Quick Start Guide Installation Requirements Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Hardware Overview Antenna Connectors Port Cover LAN Ethernet Port Reset Button Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the Rocket is already powered on. LEDs Power The Power LED will light green when the device is connected to a power source. Ethernet The Ethernet LED will light steady green when an active Ethernet connection is made and flash when there is activity. Signal In airOS, you can modify the wireless signal strength threshold values for each LED on the Advanced tab under Signal LED Thresholds. The default values are shown below: LED will light red when the wireless signal strength is above ‑94 dBm. LED will light amber when the wireless signal strength is above ‑80 dBm. LED will light green when the wireless signal strength is above ‑73 dBm. LED will light green when the wireless signal strength is above ‑65 dBm.

In-Wall Wi-Fi Access Point Model: UAP-IW Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® In‑Wall Wi-Fi Access Point. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Important: UniFi Controller v5.x is recommended for managing the UAP-IW and is available for download at: downloads.ubnt.com/unifi Package Contents In-Wall 802.11n Access Point Model: UAP-IW UAP-IW Cover Plate Quick Start Guide TERMS OF USE: It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements. Installation Requirements • Pre-installed electrical wall box • Category 5 (or above) UTP cabling approved for indoor use • Phillips screwdriver • UniFi Switch with PoE Important: The UAP-IW requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended. System Requirements • Microsoft Windows 7/8/10 or Mac OS X • Java Runtime Environment 1.6 (or above) • Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11 • UniFi Controller software v4.7 or newer Network Topology Requirements • A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment) • A management station running the UniFi Controller software, located either on-site and connected to the same Layer-2 network, or off-site in a cloud or NOC UAP-IW US-48-500W USG-PRO-4 (DHCP Server) Internet UAP-AC-PRO UAP-AC-PRO-O UAP-AC-LR LAN WAN UniFi Cloud Key (UniFi Controller) Remote Access to UniFi Controller Sample Network Diagram All UniFi devices support off-site management controllers. For setup details, see the User Guide on the website: documentation.ubnt.com/unifi