Uniden MC1010 Manuals

DECT 1010 QSG/OM 1 30/9/11 4. Press the number key (0 - 9) you want to assign to this memory dial entry. You will hear a confirmatio tone. 3. Press MEM again. • If you need the phone to wait befo sending the next set of numbe press PAUSE to insert a two-seco pause. Each pause counts as a dig • If you don’t press any keys for seconds, the phone times out a returns to standby. 1. When the phone is not in use, press MEM. The TALK/BATT LOW light flashes. 2. Use the keypad to enter the phone number exactly as you would dial i Additional Features Ringer Tone Earpiece Volume Using Call Waiting Using Memory Dial When the phone is not in use, press U or DOWN to cycle through the 2 ring tones at low, medium, and high volum During a call, press UP or DOWN select one of the 6 volume levels. If you subscribe to a Call Waiting servi through your telephone company then call waiting tone sounds while you are a call. To switch between calls: For Australian model; Press FLASH and then press 2 For New Zealand model; Press FLASH. Storing numbers in memory dia Step 6 Make & Receive Calls To Make a Call Listen for dial tone. Press TALK. Dial the desired number. To Receive a Call Pick up the handset and press TALK. To Hang Up a Call Press END or return the handset to the base. To Redial a Number Press TALK and then press REDIAL. Step 5 Connect to the Phone Line Plug the other end into the telephone wall jack. Plug one end of the telephone cord into the base TEL LINE jack. New Zealand Australia To TEL LINE Telephone line cord To telephone socket Place the handset on its base to charge. Make sure that the TALK/BATT LOW light is on to indicate charging. Fully charge the battery pack by placing the handset on the base before using the phone (about 15 hrs). When fully charged the battery will provide up to 7 hrs of talk time and 6 days standby time. Step 4 Charge the Handset Step 3 Set up the Base Note Use ONLY the Uniden AC adaptor supplied with your new phone! Plug the AC adaptor cord to the DC IN 9V jack. Plug the AC adaptor to a 240V AC power outlet. AC adaptor (supplied) To DC IN 9V To AC outlet Step 2 Install Handset Battery Pack Note Use ONLY the Uniden battery pack supplied with your new phone! Remove the cover. Connect the battery pack with the correct polarity. Replace the cover. Step 1 Check the Package Contents Base Handset AC adaptor (AAD-041S(M)) Make sure your cordless phone's packaging includes the following items. Rechargeable battery pack (BT-694m) Telephone cord Battery Cover Optional: Wall Mount Bracket Start Here! Quick Start Guide / Owner’s Manual DECT 1010

MC 1010 VHF Marine Radio Operating Guide C:...MC 1010.vp Thu Jan 28 14:42:49 1999 Color profile: Disabled Composite Default screen

1010 VHF Marine Radio MC GUIDE OPERATING Channel Scan Dual Watch