Universal Tool UT5825 Manuals

Manufacturer/Supplier Product Type RPM Cycles Per Min Tel No Fax No (01494) 883300 (01494) 883237 Model No/Nos Serial No (if any) Product Nett Weight Recommended Use Of Balancer Or Support Recommended Hose Bore Size - Minimum Recommended Max. Hose Length Ins M/M Ft M Foreseen Use Of Tool This drill is designed for the purpose of drilling holes in all types of materials, i.e. metals, wood, stone, plastics etc. using drilling bits designed for this purpose. It may be used with other forms of cutting tools, polishing devices or for sanding using coated abrasive products. Before using any such products first check with the manufacturer their suitability for use with this type of drill. Do not use bonded abrasive products (i.e. grinding wheels) or saw blades or any device which has a permitted safe working speed less than the free speed of the drill. Do not use this drill for any other purpose than that specified without consulting the manufacturer or the manufacturer's authorised supplier. Putting Into Service Air Supply Use a clean lubricated air supply that will give a measured air pressure at the tool of 90 p.s.i./6.3 bar when the tool is running with the trigger fully depressed. Use recommended hose size and length. It is recommended that the tool is connected to the air supply as shown in figure 1. Do not connect the tool to the air line system without incorporating an easy to reach and operate air shut off valve. The air supply should be lubricated. It is strongly recommended that an air filter, regulator, lubricator (FRL) is used as shown in Figure 1 as this will supply clean, lubricated air at the correct pressure to the tool. Details of such equipment can be obtained from your supplier. If such equipment is not used then the tool should be lubricated by shutting off the air supply to the tool, depressurising the line by pressing the trigger on the tool. Disconnect the air line and pour into the intake bushing a teaspoonful (5ml) of a suitable pneumatic motor lubricating Work Stations The tool should only be used as a handheld hand operated tool. It is always recommended that the tool is used when standing on the solid floor. It can be used in other posi- tions but before any such use, the operator must be in a secure posi- tion having a firm grip and footing and be aware that the drill can de- velop a torque re- action see section "Operating". No Air Pressure Recommended Working 6.3 bar 90 PSI Recommended Minimum n/a bar n/a PSI Maximum 7.0 bar 100 PSI Personal Safety Equipment Use - Safety Glasses Yes Use - Safety Gloves Use - Safety Boots Use - Breathing Masks Use - Ear Protectors Page No 1 3/8” Capacity Reversible Pistol Grip Drill UT5825 3/8 10 30 10 1,800 Includes - Foreseen Use, Work Stations, Putting Into Service, Operating, Dismantling, Assembly and Safety Rules Operator Instructions Important Read these instructions carefully before installing, operating, servicing or repairing this tool. Keep these instructions in a safe accessible place. Universal Air Tool Company Limited Unit 8 Lane End Industrial Park High Wycombe Bucks HP14 3BY lbs Kg 3.0 1.36 Noise Level Sound Pressure Level 91.0 dB(A) Test Method Tested in accordance with Pneurop test code PN8NTC1 and ISO Standard 3744 Sound Power Level 102.0 dB(A) Vibration Level Test Method Tested in accordance with ISO standard 8662/1 Less than 2.5 Metres / Sec²