Uplift Desk MON042 Manuals

© UPLIFT Desk • 800-349-3839 • [email protected] • upliftdesk.com 1 Package Contents Enfield Dual Monitor Arm SKU: MON042 Package Contents Allen Wrenches (set of two: 4mm, 6mm) Lower Arm (qty 2) Wire Cover Upper Arm (qty 2) Lower Clamp VESA Plate (qty 2) Upper Clamp M5x12 Screw (M-B) (qty 8) M5 Washer (M-C) (qty 8) M4x12 Screw (M-A) (qty 8) M6x12 Flathead Screw (qty 3) Flat Wrench Base Lower arm Upper arm Vesa mount (x1) Lower base plate Upper base plate Bar Handle Adhesive Pad Wire Cover Upper Clamp Lower Clamp Base screw (x4) 3mm Allen wrench L 4mm Allen wrench M 6mm Allen wrench N D5 Washers (x4) M5x12 bolt (x4) M4x12 bolt (x4) O Bolt (x4) N Bolt (x4) Base Lower arm Upper arm Vesa mount (x1) Lower base plate Upper base plate Bar Handle Adhesive Pad Wire Cover Upper Clamp Lower Clamp Base screw (x4) 3mm Allen wrench L 4mm Allen wrench M 6mm Allen wrench N D5 Washers (x4) M5x12 bolt (x4) M4x12 bolt (x4) O Bolt (x4) N Bolt (x4) Base Lower arm Upper arm Vesa mount (x1) Lower base plate Upper base plate Bar Handle Adhesive Pad Wire Cover Upper Clamp Lower Clamp Base screw (x4) 3mm Allen wrench L 4mm Allen wrench M 6mm Allen wrench N D5 Washers (x4) M5x12 bolt (x4) M4x12 bolt (x4) O Bolt (x4) N Bolt (x4) Base Lower arm Upper arm Vesa mount (x1) Lower base plate Upper base plate Bar Handle Adhesive Pad Wire Cover Upper Clamp Lower Clamp Base screw (x4) 3mm Allen wrench L 4mm Allen wrench M 6mm Allen wrench N D5 Washers (x4) M5x12 bolt (x4) M4x12 bolt (x4) O Bolt (x4) N Bolt (x4) Base Clamp Method Bolt-Through Method • Acceptable monitor weight range: 4.4 lb to 19.8 lb (per monitor) • Recommended monitor size: up to 32” (measured diagonally) • Desktop thickness compatibility: • Clamp Method: 0.4”-3.3” thick. • Bolt-through Method: 0.4”-3.1” thick There are two ways to attach the Enfield Dual Monitor Arm to your desktop. If you would like to attach it along the back edge of your desktop, follow the Clamp Method instructions starting on this page. If you prefer to attach it through your desktop, follow the Bolt-Through Method instructions starting on page 2. Step 1 Determine your mounting method. There are two ways to attach the Enfield Dual Monitor Arm to your desktop: Clamp Method: If you would like to attach the monitor arm along the back edge of your desktop, follow the Clamp Method instructions (Steps 2 - 4). Bolt-Through Method: If you prefer to attach the monitor arm through your desktop, skip Steps 2 - 4 and follow the Bolt-Through Method instructions (Steps 5 - 7). Step 2 (Clamp Method) Align the Upper Clamp with the Base in the orienta- tion shown and attach it using the three M6x12 Flat- head Screws and the 4mm Allen Wrench. Clamp Method Parts for Bolt-through assembly Upper Base Plate Lower Base Plate Long Bolt M8 Washer M8 Nut