Valcom VIP-142 Manuals

Issue 1 1 947103 CAUTION: To reduce the risk of electric shock, Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. VIP-142 High Power IP Talkback Paging Horn INTRODUCTION The VIP-142 IP Paging Horn is a weather- resistant, high-efficiency horn supporting multiple audio and control protocols, all delivered via a PoE-enabled IP network. A separate microphone facilitates full-duplex talkback communication. The high-impact Polycarbonate construction resists the deteriorating effects of outdoor installation. SPECIFICATIONS Access Methods • SIP telephone system • Valcom M Cast Page Group • PBX, FXO Port w/VIP-811A • POTS telephone set w/VIP-811A • PBX, FXS Port w/VIP-821A Features • Indoor / Outdoor use • High Impact Polycarbonate Housing • Omni-Directional Mounting Base • Built-in Microphone • SIP & Multicast Enabled • Power over Ethernet (PoE) 802.3af and 802.3at (PoE+) compatible • Remote Management & Monitoring Dimensions / Weight • 11.75” H x 10.0” W x 11.0” D (29.8cm H x 25.4cm W x 27.9cm D) • 4.3 lbs. (1.95 kg) Audio Codecs • G.722, G.711 (uLaw, aLaw) Frequency Response • 350 Hz to 7kHz Audio Dispersion • 120° Horizontal • 90° Vertical Nominal Power Requirements IEEE 802.3af (PoE) Class 3 IEEE 802.3at (PoE+) Class 4 These products are intended for use with a UL Listed power source marked “Class 2” or “LPS” rated 24 Vdc, or 48 Vdc (PoE). PoE and all interconnected ITE are intended for intra-building. Environment Temperature: - 20° to +50° C Humidity: 0 - 95% non-condensing