VAT 162 Series Manuals

Installation, Operating & Maintenance Instructions 603156EA Edition 2014-07-10 Pendulum valve with single acting pneumatic actuator and closing spring (NC) Series 162 DN 63 – 550 mm (I. D. 2½" – 22") This manual is valid for the following product ordering numbers: 162..-....-.... Sample picture

Installation, Operating & Maintenance Instructions Series 162, DN 320 - 400 (I.D. 12” - 16") VAT Vakuumventile AG, CH-9469 Haag, Switzerland Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected] www.vatvalve.com 268503EC 08-08-2006 1/22 Pendulum Valve This manual is valid for the valve ordering number(s): 162... The fabrication number is indicated on each product as per the label below (or similar): made in Switzerland Fabrication No.: patented . . 162. . – . . . . – . . . . / . . . . A – . . . . . . Fabrication number Explanation of symbols: Read declaration carefully before you start any other action! Keep body parts and objects away from the valve opening! Attention! Hot surfaces; do not touch! Product is in conformity with EC guidelines, if applicable! Loaded springs and/or air cushions are potential hazards! Disconnect electrical power and compressed air lines. Do not touch parts under voltage! Wear gloves! Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General Safety Instructions» carefully before you start any other action!