Vega VEGACAL 63 Manuals

Operating Instructions Capacitive rod electrode for continuous level measurement VEGACAL 62 For connection to a signal conditioning instrument Document ID: 30317

Operating Instructions Capacitive rod electrode for continuous level measurement VEGACAL 62 Profibus PA Document ID: 30025

Operating Instructions VEGACAL 63 4 … 20 mA/HART two-wire Document ID: 30027 Capacitive

Safety Manual VEGACAL series 60 Two-wire 4 … 20 mA/HART Document ID: 35593

Operating Instructions Capacitive rod electrode for continuous level measurement VEGACAL 63 Two-wire 4 … 20 mA/HART Document ID: 30027

VEGACAL 63 - 34606-EN-160112 VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com Specification sheet VEGACAL 63 4 … 20 mA/HART - two-wire Capacitive rod electrode for continuous level measurement Application area The VEGACAL 63 level sensor can be used universally for the meas- urement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction ensures high functional safety. Your benefit • Long lifetime and low maintenance requirement through robust me- chanical construction • Savings through simple mounting and setup • Maximum utilisation of vessel, because measurement over entire probe length Function Sensor and vessel form the two electrodes of a capacitor. A capaci- tance change caused by a level change is evaluated by the integrated electronics and converted into an appropriate output signal. The level measurement is carried out over the entire sensor length without a blocking distance. Technical data Measuring range 6 m (19.69 ft) Process fitting Thread from G½, ½ NPT, flanges from DN 50, 2" Process pressure -1 … +64 bar/-100 … +6400 kPa (-14.5 … +928 psig) Process temperature -50 … +200 °C (-58 … +392 °F) Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F) Operating voltage 12 … 36 V DC SIL qualification Optionally up to SIL2 Materials The wetted parts of the instrument are fully PTFE or PE insulated. You will find a complete overview of the available materials and seals in the "configurator" on our homepage at www.vega.com/configurator. Housing versions The housings are available as single chamber or double chamber ver- sion in plastic, stainless steel or aluminium. They are available with protection ratings up to IP 68 (1 bar). Electronics versions The instruments are available in different electronics versions. Apart from the two-wire electronics with 4 … 20 mA/HART, there are two pure digital versions with Profibus PA and Foundation Fieldbus possible as well as one version for connection to a signal conditioning instrument. Approvals The instruments are suitable for use in hazardous areas and are ap- proved e.g. according to ATEX and IEC. The instruments also have various ship approvals such as e.g. GL, LRS or ABS. You can find detailed information at www.vega.com/downloads and "Approvals".

Supplementary instructions Screening tube adapter for VEGACAL 63, 64/VEGACAP 63 Rod ø 16 mm Document ID: 34849

Operating Instructions Capacitive cable electrode for continuous level measurement VEGACAL 65 Two-wire 4 … 20 mA/HART Document ID: 30033 all-guides com

Operating Instructions Capacitive cable electrode for continuous level measurement VEGACAL 66 Foundation Fieldbus Document ID: 30038 all-guides com