Vertiv Cybex SC Series Manuals

HDC16046 Rev. 1.1 Objectives •� This�guide�includes�instructions�for�installing�Vertiv™ Cybex™ SC820DP, SC840DP, SC845DP, SC885DP DP to DP KVM�switches. •� A�KVM�switch allows�sharing�keyboard,�video,�mouse,�audio�and�USB�peripherals�between�multiple�computers. •� For�further�assistance,�please�refer�to�the Vertiv�website:�http://www.VertivCo.com. General •� Verify�that�all�peripherals�and�computers�are�turned�OFF�prior�to� connecting�them�to�the�product. •� The switch’s�back�panel�is�divided�into�sections�of�Console�ports� and�computer�ports. �– Connect�the�peripherals�to�be�shared�by�the�switch�to�the� Console�ports. �– Connect�each�computer�that�needs�access�to�shared� peripherals�to�a�specific�computer�ports�section.� �– Make�sure�that�every�computer�is�connected�to�a�separate� computer�ports�section. �– The�push�buttons�on�the�product’s�front�panel�indicate� which�computer�has�currently�access�to�shared�peripherals.�� �– To�switch�peripherals�between�computers,�press�the� appropriate�push�button�on�the�product’s�front�panel. SC845DP Model shown Quick Installation Guide 2/4/8 Ports High Security Single-Head DP-DP KVM Switches 1 2 3 �Connect peripherals to the switch Console ports: •� Keyboard:�Connect�either�a�USB�or�PS/2� keyboard�to�the�corresponding�switch� Console�keyboard�port. •� Video:�Connect�the�monitor�cable�to� the�switch�Console�video�port. •� Mouse:�Connect�either�a�USB�or�PS/2� mouse�to�the�corresponding�switch� Console�mouse�port. •� Audio peripherals:�Connect� headphones�/�speakers�to�the�switch� Console�audio-out�port. •� USB peripherals:�Connect�USB� peripherals�to�the�switch�Console� DPP�port.�� Note:�Authentication�devices�such�as� smartcard�and�biometric�readers�are�enabled� by�default. �Connect computers to the switch computer ports: •� Computer keyboard and mouse connection: Connect�each�computer�to� the�switch�keyboard�and�mouse�computer� port�using�a�USB�A�to�USB�B�cable.� Connect�the�USB�A�end�to�the�computer� and�the�USB�B�end�to�the switch. •� Computer video connection:�Connect� each�computer�to�the�switch�computer� video�port�using�the�corresponding� video�cable�(DisplayPort). •� Computer audio connection:�� Connect�each�computer�to�the�switch� audio-in�port�using�an�audio�cable.�� Connect�one�end�of�the�cable�to�the� computer’s�audio-out�port�using�the� 1/8"�(3.5mm)�stereo�plug.�Connect�the� other�end�of�the�audio�cable�to�the�switch� audio-in�computer�port. •� Connect USB peripherals:�Connect� each�computer�to�the�switch�USB� computer�port�using�a�USB�A�to�USB�B� cable.�Connect�the�USB�A�end�to�the� computer�and�the�USB�B�end�to�switch. Connect�the Console�DPP�port�to�a USB� peripheral�as�required� (e.g.�smart�card�reader). �Power ON your system: •� Power ON the monitor:�Make�sure� that�the�monitor�is�turned�ON�prior�to� powering�ON�the�switch. •� Power ON the system:�Connect�all� peripherals�and�computers�to�the�switch� prior�to�powering�it�up.�Power�ON�the�switch by�plugging�it�to�the�AC�wall�outlet.� By�default,�after�the product�powers on,� the�active�channel�will�be�computer�#1 as indicated�by�the�applicable�front�panel� push�button�LED being�lit. Cybex™ SC DisplayPort KVM Switches Cybex™ SC820DP, SC840DP, SC845DP, SC885DP KVM Switches

CYBEX™ SC SERIES SECURE SWITCHES SCMV200DPH MULTIVIEWER Quick Installation Guide 590-2307-501B 1 Before installing your secure desktop MultiViewer switch, ensure the tamper-evident labels are all intact. 1. Connecting local peripherals Ensure all computers and displays are turned off. Plug the display cables into the CONSOLE primary (1) and secondary (2) display ports on the back of the switch. The switch uses a combination DisplayPort (DP) and HDMI connector to enable either video format to be used as input or output. If applicable, plug the USB keyboard and mouse cables and speaker or headphone cable into the appropriate CONSOLE ports on the back of the switch. NOTE: For SCMV245DPH and SCMV285DPH models, do not connect a microphone, including a headset with an integrated microphone, to the switch’s audio output port NOTE: For security reasons, the switches do not support wireless devices. 2. Connecting a Dedicated Peripheral Port (DPP) device (if applicable) Connect a USB device, such as a smart card reader, to the blue USB Type-A CONSOLE port on the back of the switch. The device must be compliant with USB 1.1 or 2.0 standards and included in the adminstrator- defined list of recognized devices. 3 1 2 CybexTM SCMV245DPH KVM Switch Vertiv Patented Keyboard Lock Indicators Channel Label Selected Channel Indicator DPP Channel Indicator Audio Channel Indicator

CYBEX™ SC SERIES SECURE SWITCHES SC800E/SC900E Quick Installation Guide 590-2283-501B 1 NOTE: This document supports the SC800E and SC900E series secure switch models; available options may vary. Before installing your secure switch, ensure all tamper evident labels are intact. 1. Connecting local peripherals Ensure all computers and displays are turned off. Plug the display and USB keyboard and mouse cables into the appropriate CONSOLE ports on the back of the switch. NOTE: For security reasons, the switches do not support wireless devices. 2. Connecting each computer Connect a USB cable from each computer to the USB keyboard/ mouse Type-B port on the switch. Plug the display cable from the corresponding computer into the appropriate port on the switch. Repeat for all computers. NOTE: The USB cables must be connected directly to a free USB port on your computer with no hubs or devices in between. 3. Turning on the displays, switch and computers NOTE: Install local switch peripherals before powering up the switch. Power on the connected displays. Plug in the provided power adaptor into the switch and the other end into a wall outlet. NOTE: Use an appropriate wall socket adapter The keyboard and mouse diagnostic LEDs indicate an approved device is connected and ready for use. Each LED illuminates solid green a few seconds after power is applied. • Off - no device detected • Blinking - device is rejected • On - device is approved The video diagnostic LED indicates the Extended Display Identification Data (EDID) information has been successfully read from the display and stored in memory. The EDID is only read in the first few seconds after the switch is powered on. • Off - no EDID detected • Blinking - reading EDID • On - EDID received NOTE: Hot-plugging or swapping displays while the switch is on is not supported. To change a display, power cycle the KVM switch. Turn on the computers. Ensure the peripherals for each computer are connected and working properly. 4. Switching between computers Press the appropriate front panel button on the switch to switch between computers. The button of the selected computer illuminates. 5. Keyboard lock indicators Illuminates when the Num, Caps or Scroll locks are activated. Cables Use Vertiv cable kits with your switch to ensure optimal security and performance. Contact a Vertiv representative for ordering details. 1 3 2 CybexTM SC940DPE Secure KVM Switch Shown 4 5