Vestil P-JIB Series Manuals

1 pdf manual(s) Vestil P-JIB Series for free download (Document Types: Instruction manual)

Vestil P-JIB Series Instruction manual [PDF] (11 pages)

  • Identifier: id-1644872
  • Brand: Vestil
  • Device: P-JIB Series Construction Equipment
  • Type: PDF
  • Key Aspects: Regulatory Compliance and Standards, Risk Mitigation and Accident Prevention, Operational Mode Explanations
  • UPD Date: 18.05.2026
  • Source File: 1673857.pdf
  • Pages: 11
  • Description: Complete usage guide for the Vestil P-JIB Series.
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Rev. 3/14/2017 P-JIB, MANUAL Copyright 2017 Vestil Manufacturing Co. Page 1 of 11 P-JIB Portable Jib Crane Instruction Manual Receiving instructions: After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, immediately record a complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging. Note: The end-user is solely responsible for confirming that product design, installation, use, and maintenance comply with laws, regulations, codes, and mandatory standards applied where the product is used. Vestil Manufacturing Corp. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: [email protected] Table of Contents Signal words….…………………………………………………………………………………………………………….…………….. 2 Safe use recommendations………………………………………………………………..…………………………………………… 2 FIG. 1A: P-JIB-2 exploded parts diagram & bill of materials……………….……………………………………………………….. 3 FIG. 1B: P-JIB-2 specifications……………………………….…….………………………………………………………………….. 4 FIG. 2A: P-JIB-4 exploded parts diagram & bill of materials…….………………………………………………………………….. 5 FIG. 2B: P-JIB-4 specifications………………………………..…..……………………………………………................................ 6 FIG. 3: Manual hydraulic pump exploded parts diagram & bill of materials……………………………………………………….. 7 Operating the crane…………………………………..…………………………………………………………………… ……………. 8 Operating the hand pump………………..…………………………………………………………………….……………………….. 8 Air bleeding procedure……………………………………………………………………………. …………………………………… 9 Boom length adjustment………………………………………………………………………………………………………………… 9 Inspections & Maintenance……………………………..…………………………………………........................................... 9 - 10 Labeling diagram……...……………………………….………………………………………………………………………………. 10 Limited Warranty…...…………………………………………………………………………………………………………………… 11

Vestil P-JIB Series: Construction Equipment Category Related Instructions

RDB-480
Baileigh RDB-480
12.07.2026 60 pages

OPERATOR’S MANUAL ROTARY DRAW BENDER MODEL: RDB-480 © 2020 Baileigh Industrial Holdings LLC REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL HOLDINGS LLC IS PROHIBITED. Baileigh Industrial Holdings LLC, Inc. does not a Quick start guide for the Baileigh RDB-480 Construction Equipment. It explains service instructions, operational guidelines, safety protocols.

61490
WilTec 61490
07.07.2026 8 pages

Operation Manual 12 t and 16 t Pipe Bender 61490, 51840 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developmen User support guide for the WilTec 61490 Construction Equipment. This guide provides technical guidance on device reset instructions, reset instructions, software updates.

Series A
Graco Series A
05.09.2026 22 pages

3A6584A EN Repair Displacement Pump For professional use only. 3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure Model 16Y598, Series A UltraMax II and Ultimate MX II 695/795 STD GMAX II 3900 STD SL 1250, Mustang 11500 ASM H3150, Storch ST900 Model 17H828, Reference manual for the Graco Series A Water Pump. This documentation explains configuration and operation, service procedures, specifications.

12/89
IMT 12/89
03.09.2026 92 pages

12/89: PARTS-1 Repair Parts Model 12/89 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NUMBER: 99903049 99903049: 20111201 Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation company. Official product manual for the IMT 12/89 Construction Equipment. This guide explains technical procedures for connectivity options, adjustment procedures, support details, device overview.